CWICP-202 Certified Wireless IoT Connectivity Professional (CWICP) โ Exam Overview
Quick Facts
CWICP-202 is the current version of the CWNP Certified Wireless IoT Connectivity Professional (CWICP) certification (April 2024, exam deadline December 31, 2027), and candidates must hold a valid CWISA certification before taking it.
Who this exam is for
Wireless and IoT professionals who design, implement, secure, validate and troubleshoot wireless IoT connectivity solutions and who already hold a valid CWISA certification.
Exam Domains
Wireless IoT Technologies and Solutions โ 10%
Covers the major wireless IoT technologies and how to select among them for a given use case, including BLE, Zigbee, Thread, Z-Wave, LoRaWAN and cellular LPWAN. It also addresses solution architecture elements such as end devices, gateways and network and application servers.
Wireless IoT RF Characteristics โ 10%
Covers the RF behaviour that determines whether an IoT link works, including path loss, RSSI, SNR, multipath fading, antenna gain and link budgets. It also addresses interference in shared unlicensed bands and its effect on low-power links.
Wireless IoT PHY Structure and Operations โ 20%
Covers the physical layers of key wireless IoT technologies, including IEEE 802.15.4 modulation and channels, BLE 1M, 2M and Coded PHYs, and LoRa chirp spread spectrum with spreading factor and bandwidth trade-offs. It also covers spread spectrum, frequency hopping, Z-Wave, Wi-Fi HaLow and regulatory duty-cycle constraints.
Wireless IoT MAC Layer Structure and Operations โ 20%
Covers MAC-layer operation across IoT technologies, including 802.15.4 CSMA/CA, frame types, addressing, PAN IDs, association and guaranteed time slots. It also covers LoRaWAN device classes and activation, Thread roles, BLE advertising and connections, Zigbee device roles and Z-Wave inclusion.
Wireless IoT Upper Layers Protocols โ 20%
Covers the protocols above the radio layers that carry and manage IoT data, including MQTT publish-subscribe with QoS, topics, retained messages and Last Will, and CoAP over UDP with confirmable messages, Observe and block-wise transfer. It also covers 6LoWPAN, LwM2M, BLE GATT, Zigbee clusters and LoRaWAN server roles.
Wireless IoT Security โ 10%
Covers how wireless IoT solutions are protected, including AES-based link security, LoRaWAN key separation, BLE LE Secure Connections pairing and Zigbee trust centre functions. It also addresses unique device credentials, signed firmware updates, replay protection and message integrity.
Validate and Troubleshoot IoT Solutions โ 10%
Covers validating a deployed IoT solution and troubleshooting it methodically, including spectrum analysis, protocol sniffing, RF coverage validation at installed locations and end-to-end data verification. It also addresses interpreting retries and packet loss and isolating common-cause failures such as a gateway outage.
Preparing for CWICP-202
Work through the practice questions in study mode first, read every explanation, then switch to timed practice. Weight your revision by the domain weightings above and revisit the topics you score lowest on until your practice scores are consistent.
Write Your Review on CWICP-202 Certified Wireless IoT Connectivity Professional (CWICP)
CWICP-202 Customer Reviews
No reviews yet
Be the first to share your experience with this exam.