Loading demo links...
What to study for each CWICP-202 domain
Wireless IoT Technologies and Solutions
Covers the major wireless IoT technologies and how to select among them for a given use case, including BLE, Zigbee, Thread, Z-Wave, LoRaWAN and cellular LPWAN. It also addresses solution architecture elements such as end devices, gateways and network and application servers.
Key skills
BLE, Zigbee, Thread, Z-Wave, LoRaWAN, NB-IoT, technology selection, gateways, solution architecture
Wireless IoT RF Characteristics
Covers the RF behaviour that determines whether an IoT link works, including path loss, RSSI, SNR, multipath fading, antenna gain and link budgets. It also addresses interference in shared unlicensed bands and its effect on low-power links.
Key skills
Path loss, RSSI, SNR, multipath, antenna gain, link budget, interference analysis
Wireless IoT PHY Structure and Operations
Covers the physical layers of key wireless IoT technologies, including IEEE 802.15.4 modulation and channels, BLE 1M, 2M and Coded PHYs, and LoRa chirp spread spectrum with spreading factor and bandwidth trade-offs. It also covers spread spectrum, frequency hopping, Z-Wave, Wi-Fi HaLow and regulatory duty-cycle constraints.
Key skills
802.15.4 PHY, O-QPSK and DSSS, BLE PHYs, LoRa CSS, spreading factor, FHSS, duty cycle
Wireless IoT MAC Layer Structure and Operations
Covers MAC-layer operation across IoT technologies, including 802.15.4 CSMA/CA, frame types, addressing, PAN IDs, association and guaranteed time slots. It also covers LoRaWAN device classes and activation, Thread roles, BLE advertising and connections, Zigbee device roles and Z-Wave inclusion.
Key skills
CSMA/CA, 802.15.4 frames and addressing, LoRaWAN classes, OTAA and ABP, Thread roles, BLE connections, Zigbee roles
Wireless IoT Upper Layers Protocols
Covers the protocols above the radio layers that carry and manage IoT data, including MQTT publish-subscribe with QoS, topics, retained messages and Last Will, and CoAP over UDP with confirmable messages, Observe and block-wise transfer. It also covers 6LoWPAN, LwM2M, BLE GATT, Zigbee clusters and LoRaWAN server roles.
Key skills
MQTT, CoAP, 6LoWPAN, LwM2M, GATT, Zigbee clusters, application and network servers
Wireless IoT Security
Covers how wireless IoT solutions are protected, including AES-based link security, LoRaWAN key separation, BLE LE Secure Connections pairing and Zigbee trust centre functions. It also addresses unique device credentials, signed firmware updates, replay protection and message integrity.
Key skills
AES-128, LoRaWAN session keys, LE Secure Connections, trust centre, secure OTA, replay protection
Validate and Troubleshoot IoT Solutions
Covers validating a deployed IoT solution and troubleshooting it methodically, including spectrum analysis, protocol sniffing, RF coverage validation at installed locations and end-to-end data verification. It also addresses interpreting retries and packet loss and isolating common-cause failures such as a gateway outage.
Key skills
Spectrum analysis, packet capture, site validation, end-to-end testing, fault isolation, troubleshooting methodology