Free API-SIRE – Source Inspector Rotating Equipment Practice Test Question

Free demo downloads

Loading demo links...

Showing 1–10 of 10 questions

Question 1 (Terms and Definitions)

In source inspection, what does inspection at the supplier's works before release for shipment primarily verify?

Select an option, then click Submit answer.

  • ○ That equipment conforms to the purchase order, specifications and approved drawings before it leaves the manufacturer
  • ○ That the supplier's commercial invoices match the letter of credit
  • ○ That site erection crews are competent to install the equipment
  • ○ That process performance guarantees will be met in operation

Ask AI for More Explanation

— your own AI account, opens inside the app

About the API-SIRE Free Practice Test

This page holds a free practice test for the Source Inspector Rotating Equipment (API-SIRE) certification from API. You will find 10 free questions, drawn from the full Study4Pass practice set of 80 questions for this exam. The questions follow the same topic balance as the real exam: Terms and Definitions; Source Inspection Management Program; Equipment Risk Assessment; Source Inspection Performance; Examination Methods, Tools and Equipment; Manufacturing and Fabrication Processes; Centrifugal Pumps; Drivers; Gears; Steam Turbines; Lube Oil Systems; Reciprocating Compressors; Rotary (Screw) Type Compressors; Testing of Axial/Centrifugal Compressors.

How to use this API-SIRE free practice test

Pick an answer for each question and check it straight away — the correct answer and a full explanation appear under the question. There is no time limit and nothing to sign up for. When an explanation is not enough, use Ask AI: this is an AI-Enabled practice test, and Ask AI explains the concept behind the question in plain language. Ready for more? The full 80-question set adds a timed Exam Simulation mode, topic training for your weak areas, and a flagged-question review.

What to study for each API-SIRE domain

Terms and Definitions

Covers the core vocabulary of source inspection and rotating equipment, including hold, witness and review points, nonconformance reports, punch lists and release terminology. Candidates must use these terms precisely in reports, ITPs and communications with suppliers and purchasers.

Key skills

Inspection terminology, hold and witness points, NCR and punch list definitions, release documentation language

Source Inspection Management Program

Covers how a source inspection programme is organised, including assignment instructions, inspection assignment packages, pre-inspection meetings and kickoff activities. It also addresses how surveillance levels are set and how inspector reports are reviewed and distributed.

Key skills

Programme organisation, assignment instructions, pre-inspection meetings, surveillance levels, report review

Equipment Risk Assessment

Covers criticality and risk assessment of rotating equipment and how the results drive the project inspection plan and Inspection and Test Plans. It includes consequence and supplier-performance inputs, intervention point selection and the review of supplier reports against risk.

Key skills

Criticality ranking, risk-based ITP development, supplier performance assessment, report review, intervention planning

Source Inspection Performance

Covers how inspectors conduct themselves at supplier works, including safety, project document review before visits, witnessing activities and signing ITP steps only for work actually witnessed. It also covers report writing, flash reports and the handling of nonconformances and deviations through formal channels.

Key skills

Inspector conduct and safety, document review, test witnessing, objective report writing, NCR and deviation handling

Examination Methods, Tools and Equipment

Covers dimensional and visual inspection with calibrated instruments, awareness of electrical testing techniques such as insulation resistance testing, and witnessing of pressure and functional tests. It also covers surface preparation and coating inspection, including SSPC-SP solvent and blast cleaning standards and dry film thickness measurement.

Key skills

Dimensional measurement, visual examination, insulation resistance testing, hydrostatic test witnessing, SSPC-SP standards, DFT measurement

Manufacturing and Fabrication Processes

Covers welding processes, procedure and welder qualification, weld defects and post-weld heat treatment, together with casting, forging and machining defects and controls. It also addresses metallurgy issues such as sensitisation and positive material identification, and assembly of equipment trains on a common baseplate.

Key skills

WPS and PQR review, weld and casting defect recognition, machining inspection, PMI, PWHT, baseplate train assembly checks

Centrifugal Pumps

Covers API 610 centrifugal pump design and construction, including overhung and between-bearings configurations, materials of construction and key components such as shaft sleeves and seals. It also covers casing hydrostatic testing and hydraulic performance acceptance testing in accordance with HI 14.6, including NPSH margins.

Key skills

API 610 construction and materials, pump components, hydrostatic testing, HI 14.6 performance test witnessing, NPSH assessment

Drivers

Covers inspection of electric motors and other drivers for rotating equipment packages, including nameplate and datasheet verification, enclosure and insulation classes, and routine electrical tests. It also covers driver-specific checks such as uncoupled rotation, polarisation index and turbine driver governor and trip verification.

Key skills

Motor inspection, nameplate verification, insulation testing, rotation checks, driver protection and governor checks

Gears

Covers API 677 general-purpose gear units, including gear unit materials and manufacture by carburising and grinding, and internal component inspection. It also covers gear tooth contact pattern and backlash checks and mechanical testing of gear units for temperature, noise and vibration.

Key skills

API 677 requirements, gear materials, contact pattern and backlash measurement, gear unit test witnessing

Steam Turbines

Covers steam turbine construction, including horizontally split casings, rotors, blades, diaphragms and glands, and the inspection points used when casings are open. It also covers governor and stop valve checks, overspeed trip testing and judgement of mechanical run test behaviour.

Key skills

Turbine construction, internal inspection points, overspeed trip testing, governor and valve verification, run test assessment

Lube Oil Systems

Covers API 614 lube oil systems, including reservoirs, pumps, coolers, filters and protective instrumentation, and the inspection of reservoir materials and internals. It also covers oil flushing acceptance to a specified cleanliness level and functional testing of low-pressure alarms, standby pump starts and trips.

Key skills

API 614 system components, flushing acceptance, protective function testing, reservoir inspection

Reciprocating Compressors

Covers API 618 reciprocating compressors, including cylinders, distance pieces, piston rod packing and valves, and internal component inspection such as piston rod runout measurement. It also covers pressure and leak testing of cylinders and final inspection and preparation for shipment, including preservation and blanking.

Key skills

API 618 construction, rod runout checks, valve inspection, cylinder pressure testing, shipment preparation

Rotary (Screw) Type Compressors

Covers twin-screw rotary compressors, including the intermeshing rotor compression principle and the testing of complete packages for vibration, temperatures, oil system behaviour and noise. It also covers package auxiliaries such as oil separation, cooling and capacity control, and final inspection and shipment preparation.

Key skills

Screw compressor principles, mechanical run test witnessing, auxiliary system inspection, final inspection and preservation

Testing of Axial/Centrifugal Compressors

Covers API 617 axial and centrifugal compressors, including impeller and diffuser compression, and the witnessing of mechanical running tests at maximum continuous speed against API 617 vibration limits. It also covers performance testing awareness in accordance with ASME PTC 10 and the observations an inspector records during tests.

Key skills

API 617 machine construction, mechanical running tests, vibration acceptance, ASME PTC 10 performance test awareness, test witnessing records

API-SIRE practice test — quick questions

Is this API-SIRE practice test free?

Yes — the 10 questions on this page are completely free, with no signup and no payment details needed.

How many questions are in the full API-SIRE set?

80 questions. The 10 free questions above are a sample of that full set, in the same style and topic balance.

Does the free test show the answers?

Yes — every question shows the correct answer with an explanation, and Ask AI can explain the concept behind a question in plain words if you want to go deeper.

Practice Tests Related to API-SIRE