API-SIEE Source Inspector Electrical Equipment โ Exam Overview
Quick Facts
The API SIEE Source Inspector Electrical Equipment exam contains 120 questions (110 scored and 10 pretest) to be answered in 3 hours and 15 minutes. It is a closed-book exam โ no references are available during the exam. The exam fee is $380 for API members and $500 for non-members, and the certification is valid for 3 years. API sets a passing scaled score but does not publish a numeric pass mark.
Who this exam is for
This practice test is for source inspectors and QA/QC professionals who inspect electrical equipment at supplier facilities before shipment. It suits inspectors, inspection coordinators and vendor surveillance personnel who witness factory tests and verify motors, transformers, switchgear and skid-mounted packages against purchase orders, specifications and industry codes.
Exam Domains
Terms and Definitions
Covers the working vocabulary of source inspection and electrical equipment, including hold, witness and review points, surveillance, factory and site acceptance tests, nonconformance and criticality. Inspectors must use these terms precisely because inspection documents and reports depend on their exact meanings.
Source Inspection Management Program
Covers how a source inspection programme is organised, from assignment instructions and inspector competency to pre-inspection meetings and graded surveillance levels. It also covers inspection release for shipment and the rule that hold points are released only through the documented authority route.
Equipment Risk Assessment
Covers criticality assessment of electrical equipment based on failure consequence, complexity and supplier track record. The assessment feeds the source inspection project plan and the Inspection and Test Plans, and includes review of supplier reports and records to set the right depth of verification for each item.
Source Inspection Performance
Covers how inspectors conduct themselves at supplier works: electrical safety awareness including NFPA 70E principles, preparation and document review before visits, witnessing tests without operating supplier equipment, and objective report writing. It also covers raising nonconformances and ensuring deviations are approved in writing by the purchaser before release.
Examination Methods, Tools and Equipment
Covers the examination techniques applied to electrical equipment: visual and dimensional inspection, insulation resistance and winding resistance testing, dielectric withstand awareness, and functional testing of alarms, trips and interlocks. It also covers surface preparation and coatings inspection and torque verification of bolted connections.
Electrical Skid Mounted Equipment
Covers inspection of electrical systems on skid-mounted packages, including equipment for hazardous (classified) locations, purged and pressurised enclosures, cable support systems and equipment grounding. It also covers AC control wiring, junction boxes, control panels and the codes that govern skid electrical systems, including API RP 14F and 14FZ.
Liquid-Immersed Transformers
Covers the design and construction of liquid-immersed transformers per IEEE C57.12.00 and the inspection points they generate, including core and coil construction, bushings, insulating oil, radiators and cooling equipment. It also covers factory test witnessing awareness for routine tests such as ratio and winding resistance.
Switchgear (Low & Medium Voltage)
Covers the design and construction of low and medium voltage switchgear per the IEEE C37.20 series, including ratings, interlocks, grounding, wiring, housing frames and enclosure compartments. It also covers circuit breakers, electric tie breakers, current and voltage transformers, control power transformers and metering.
Motor Control Centers (Low to Medium Voltage)
Covers the design and construction of motor control centers per the NEMA ICS series, including materials of construction, enclosure types, circuit breakers and amp capacity. It also covers the main feeder cable entry compartment, the ground bus and the main isolating switch, plus starter unit inspection against the driven motor.
Electrical Induction Motors
Covers the design and construction of electrical induction motors per API 541 for form-wound motors of 500 hp and larger, IEEE 841 for severe-duty motors and NEMA MG-1 for general requirements. It also covers materials of construction and motor testing, including routine winding checks, mechanical runs and vibration awareness.
Electrical Inspection Tools and Test Equipment
Covers the tools of electrical inspection: multimeters, insulation resistance testers, clamp meters, and torque and measurement tools. It addresses calibration and traceability, safe use including meter category ratings, and the NETA ATS acceptance testing context in which test results are judged.
Preparing for API-SIEE
Work through the practice questions in study mode first, read every explanation, then switch to timed practice. Weight your revision by the domain weightings above and revisit the topics you score lowest on until your practice scores are consistent.
Write Your Review on API-SIEE Source Inspector Electrical Equipment
API-SIEE Customer Reviews
No reviews yet
Be the first to share your experience with this exam.