Free API-SIEE – Source Inspector Electrical Equipment Practice Test Question

Free demo downloads

Loading demo links...

Showing 1–10 of 10 questions

Question 1 (Terms and Definitions)

In an Inspection and Test Plan (ITP), what is a witness point?

Select an option, then click Submit answer.

  • ○ An activity the inspector may observe if present, where work must not proceed beyond that point without the inspector in attendance or a documented waiver from the designated authority
  • ○ An activity the supplier performs alone and reports on at final inspection
  • ○ A random visit with no defined scope or acceptance criteria
  • ○ A commercial milestone used only to release a progress payment

Ask AI for More Explanation

— your own AI account, opens inside the app

About the API-SIEE Free Practice Test

This page holds a free practice test for the Source Inspector Electrical Equipment (API-SIEE) certification from API. You will find 10 free questions, drawn from the full Study4Pass practice set of 80 questions for this exam. The questions follow the same topic balance as the real exam: Terms and Definitions; Source Inspection Management Program; Equipment Risk Assessment; Source Inspection Performance; Examination Methods, Tools and Equipment; Electrical Skid Mounted Equipment; Liquid-Immersed Transformers; Switchgear (Low & Medium Voltage); Motor Control Centers (Low to Medium Voltage); Electrical Induction Motors; Electrical Inspection Tools and Test Equipment.

How to use this API-SIEE free practice test

Pick an answer for each question and check it straight away — the correct answer and a full explanation appear under the question. There is no time limit and nothing to sign up for. When an explanation is not enough, use Ask AI: this is an AI-Enabled practice test, and Ask AI explains the concept behind the question in plain language. Ready for more? The full 80-question set adds a timed Exam Simulation mode, topic training for your weak areas, and a flagged-question review.

What to study for each API-SIEE domain

Terms and Definitions

Covers the working vocabulary of source inspection and electrical equipment, including hold, witness and review points, surveillance, factory and site acceptance tests, nonconformance and criticality. Inspectors must use these terms precisely because inspection documents and reports depend on their exact meanings.

Key skills

Defining ITP point types, acceptance test terms, nonconformance terminology and criticality in inspection communications

Source Inspection Management Program

Covers how a source inspection programme is organised, from assignment instructions and inspector competency to pre-inspection meetings and graded surveillance levels. It also covers inspection release for shipment and the rule that hold points are released only through the documented authority route.

Key skills

Running pre-inspection meetings, issuing assignment instructions, setting surveillance levels and controlling inspection release

Equipment Risk Assessment

Covers criticality assessment of electrical equipment based on failure consequence, complexity and supplier track record. The assessment feeds the source inspection project plan and the Inspection and Test Plans, and includes review of supplier reports and records to set the right depth of verification for each item.

Key skills

Rating equipment criticality, building project plans and ITPs, and reviewing supplier documentation for risk signals

Source Inspection Performance

Covers how inspectors conduct themselves at supplier works: electrical safety awareness including NFPA 70E principles, preparation and document review before visits, witnessing tests without operating supplier equipment, and objective report writing. It also covers raising nonconformances and ensuring deviations are approved in writing by the purchaser before release.

Key skills

Witnessing tests safely, writing evidence-based inspection reports, and handling nonconformances and deviations correctly

Examination Methods, Tools and Equipment

Covers the examination techniques applied to electrical equipment: visual and dimensional inspection, insulation resistance and winding resistance testing, dielectric withstand awareness, and functional testing of alarms, trips and interlocks. It also covers surface preparation and coatings inspection and torque verification of bolted connections.

Key skills

Applying visual, dimensional and electrical test methods and interpreting results against specified acceptance criteria

Electrical Skid Mounted Equipment

Covers inspection of electrical systems on skid-mounted packages, including equipment for hazardous (classified) locations, purged and pressurised enclosures, cable support systems and equipment grounding. It also covers AC control wiring, junction boxes, control panels and the codes that govern skid electrical systems, including API RP 14F and 14FZ.

Key skills

Inspecting hazardous-area equipment, pressurised enclosures, cable systems, grounding and skid control panels

Liquid-Immersed Transformers

Covers the design and construction of liquid-immersed transformers per IEEE C57.12.00 and the inspection points they generate, including core and coil construction, bushings, insulating oil, radiators and cooling equipment. It also covers factory test witnessing awareness for routine tests such as ratio and winding resistance.

Key skills

Inspecting transformer construction, bushings, oil condition and cooling systems, and witnessing routine factory tests

Switchgear (Low & Medium Voltage)

Covers the design and construction of low and medium voltage switchgear per the IEEE C37.20 series, including ratings, interlocks, grounding, wiring, housing frames and enclosure compartments. It also covers circuit breakers, electric tie breakers, current and voltage transformers, control power transformers and metering.

Key skills

Inspecting switchgear construction and ratings, proving interlocks, and verifying breakers, instrument transformers and metering

Motor Control Centers (Low to Medium Voltage)

Covers the design and construction of motor control centers per the NEMA ICS series, including materials of construction, enclosure types, circuit breakers and amp capacity. It also covers the main feeder cable entry compartment, the ground bus and the main isolating switch, plus starter unit inspection against the driven motor.

Key skills

Inspecting MCC bus ratings and bracing, starter units, feeder entry compartments, ground bus and isolating switches

Electrical Induction Motors

Covers the design and construction of electrical induction motors per API 541 for form-wound motors of 500 hp and larger, IEEE 841 for severe-duty motors and NEMA MG-1 for general requirements. It also covers materials of construction and motor testing, including routine winding checks, mechanical runs and vibration awareness.

Key skills

Inspecting motor construction and nameplate data against datasheets and witnessing routine motor tests and vibration checks

Electrical Inspection Tools and Test Equipment

Covers the tools of electrical inspection: multimeters, insulation resistance testers, clamp meters, and torque and measurement tools. It addresses calibration and traceability, safe use including meter category ratings, and the NETA ATS acceptance testing context in which test results are judged.

Key skills

Selecting, checking and safely using electrical test instruments and verifying their calibration status

API-SIEE practice test — quick questions

Is this API-SIEE practice test free?

Yes — the 10 questions on this page are completely free, with no signup and no payment details needed.

How many questions are in the full API-SIEE set?

80 questions. The 10 free questions above are a sample of that full set, in the same style and topic balance.

Does the free test show the answers?

Yes — every question shows the correct answer with an explanation, and Ask AI can explain the concept behind a question in plain words if you want to go deeper.

Practice Tests Related to API-SIEE