API-982 Refractory Inspector — Exam Overview
Quick Facts
The API 982 Refractory Inspector exam contains 165 questions (150 scored and 15 pretest) to be answered in 4 hours. It is a closed-book exam — no references are available and nothing may be brought into the testing center — and it can be scheduled in person or by remote proctoring. The exam fee is $690 for API members and $760 for non-members, and the certification is valid for 3 years. API sets a passing scaled score but does not publish a numeric pass mark.
Who this exam is for
This certification is for experienced refractory inspectors and QA professionals in refining and petrochemical plants who inspect, accept and assess refractory linings in fired heaters, FCCU equipment, reactors and other process equipment. It suits owner, contractor and third-party inspectors who work to API RP 982 and API Standard 936 and need to validate their knowledge of materials, in-service inspection, repairs and degradation.
Exam Domains
Roles and Responsibilities
Covers how responsibility for refractory work is divided among the owner, the inspector and the contractor under API RP 982 Section 4, including who defines service requirements, who installs and performs quality control, and who verifies conformance. It also addresses inspector authority at hold points, approval of substitutions, and the documentation duties that create the permanent equipment record.
Material Properties and Lining Designs
Covers refractory categories and types — castables, brick, ceramic fiber and plastics — and how application and installation methods compare in advantages and disadvantages. It also addresses anchoring system design, service requirements and critical properties, selection for refinery equipment such as FCCU components, thermal conductivity concepts from API Pub 935, and monolithic manufacture, properties and selection from API TR 978.
In-Service Inspection
Covers inspection methods and their limitations — visual, hammer test, mechanical tests, thermography and infrared, radiography, partial tear-out, remote visual and thickness verification — as set out in API RP 982 Section 6 and Annex A. It also covers remaining-life calculation, defect and degradation identification, Inspection and Test Plan requirements, and inspection documentation and reporting.
Repair Methods and Quality Control
Covers repair of damaged and defective refractory, including how repair areas are established and calculated, surface preparation, anchoring and specification requirements in repairs, and installation methods for repairs. It also addresses the critical quality control aspects of installation for casting, fiber, pneumatic gunning, anchors and brick, together with curing and dryout concepts from API TR 980.
Refractory Degradation
Covers how refractory systems degrade in service, including castable cracking, spalling, laminations, erosion, corrosion and chemical attack, coke-induced failure, overheating and gas bypassing. It also covers brick creep and coke impregnation, anchor system degradation, failure modes of fiber and multi-layer systems, ferrules and tiles, and the testing concepts in API TR 981 for expansion under load and creep and API TR 977 for erosion-resistance testing variability.
Preparing for API-982
Work through the practice questions in study mode first, read every explanation, then switch to timed practice. Weight your revision by the domain weightings above and revisit the topics you score lowest on until your practice scores are consistent.
Write Your Review on API-982 Refractory Inspector
API-982 Customer Reviews
No reviews yet
Be the first to share your experience with this exam.