Loading demo links...
What to study for each API-982 domain
Roles and Responsibilities
Covers how responsibility for refractory work is divided among the owner, the inspector and the contractor under API RP 982 Section 4, including who defines service requirements, who installs and performs quality control, and who verifies conformance. It also addresses inspector authority at hold points, approval of substitutions, and the documentation duties that create the permanent equipment record.
Key skills
Roles of owner, inspector and contractor and their responsibilities, inspector authority and documentation duties, and qualification expectations for refractory inspection personnel.
Material Properties and Lining Designs
Covers refractory categories and types — castables, brick, ceramic fiber and plastics — and how application and installation methods compare in advantages and disadvantages. It also addresses anchoring system design, service requirements and critical properties, selection for refinery equipment such as FCCU components, thermal conductivity concepts from API Pub 935, and monolithic manufacture, properties and selection from API TR 978.
Key skills
Refractory categorisations and types, application and installation methods, anchoring system design and techniques, service requirements and critical properties, refractory selection for FCCU and other refinery equipment, thermal conductivity, and monolithic refractory manufacture, properties and selection.
In-Service Inspection
Covers inspection methods and their limitations — visual, hammer test, mechanical tests, thermography and infrared, radiography, partial tear-out, remote visual and thickness verification — as set out in API RP 982 Section 6 and Annex A. It also covers remaining-life calculation, defect and degradation identification, Inspection and Test Plan requirements, and inspection documentation and reporting.
Key skills
Inspection methods and limitations including visual, hammer, thermography, radiography, tear-out, remote visual and thickness verification, remaining-life calculation, defect and degradation identification, Inspection and Test Plan requirements, and documentation and reporting.
Repair Methods and Quality Control
Covers repair of damaged and defective refractory, including how repair areas are established and calculated, surface preparation, anchoring and specification requirements in repairs, and installation methods for repairs. It also addresses the critical quality control aspects of installation for casting, fiber, pneumatic gunning, anchors and brick, together with curing and dryout concepts from API TR 980.
Key skills
Repair of damaged and defective refractory, installation methods for repairs, anchoring and specification requirements in repairs, repair area calculation, critical quality control for casting, fiber, gunning, anchors and brick, and dryout concepts.
Refractory Degradation
Covers how refractory systems degrade in service, including castable cracking, spalling, laminations, erosion, corrosion and chemical attack, coke-induced failure, overheating and gas bypassing. It also covers brick creep and coke impregnation, anchor system degradation, failure modes of fiber and multi-layer systems, ferrules and tiles, and the testing concepts in API TR 981 for expansion under load and creep and API TR 977 for erosion-resistance testing variability.
Key skills
Castable degradation including cracking, spalling, laminations, erosion, corrosion, coke-induced failure, overheating and gas bypassing, brick degradation, anchor system degradation, fiber and multi-layer failure modes, ferrules and tiles, thermal expansion under load and creep testing, and erosion-resistance testing variability.