Free API-BFJI – Bolted Flange Joint Inspector Practice Test Question

Free demo downloads

Loading demo links...

Showing 1–10 of 10 questions

Question 1 (Flanged Joints)

During pre-assembly inspection you find a radial scratch running across the full width of a raised-face sealing surface. What is the correct inspection disposition?

Select an option, then click Submit answer.

  • ○ Reject the flange for use until the face is repaired or replaced and re-inspected
  • ○ Accept it, because radial scratches seal better than spiral serrations
  • ○ Accept it if the gasket is a soft sheet type that will fill the scratch
  • ○ Wire-brush the scratch smooth and accept without further checks

Ask AI for More Explanation

— your own AI account, opens inside the app

About the API-BFJI Free Practice Test

This page holds a free practice test for the Bolted Flange Joint Inspector (API-BFJI) certification from API. You will find 10 free questions, drawn from the full Study4Pass practice set of 80 questions for this exam. The questions follow the same topic balance as the real exam: Flanged Joints; Bolts; Gaskets; Lubrication; Bolting tools and equipment; Assembly of flanges.

How to use this API-BFJI free practice test

Pick an answer for each question and check it straight away — the correct answer and a full explanation appear under the question. There is no time limit and nothing to sign up for. When an explanation is not enough, use Ask AI: this is an AI-Enabled practice test, and Ask AI explains the concept behind the question in plain language. Ready for more? The full 80-question set adds a timed Exam Simulation mode, topic training for your weak areas, and a flagged-question review.

What to study for each API-BFJI domain

Flanged Joints

Covers inspecting flange faces for damage, corrosion and defects, and verifying flange type, pressure rating and facing against the specification to ASME B16.5 and B16.47. It also covers flange alignment, parallelism and gap acceptance criteria, and identifying incorrect or mismatched flanges before assembly proceeds.

Key skills

Flange face defect inspection, rating and facing verification, parallelism and gap measurement, mismatch identification, B16.5 and B16.47 dimensional checks

Bolts

Covers verifying bolt and stud material grades and markings against the joint specification, and checking thread condition, engagement and traceability. It also covers verifying specified bolt load and torque values and tightening records, detecting stretched, yielded or damaged bolting, and awareness of the BFJI eligibility experience pathway for API 510, 570 and 653 holders.

Key skills

Grade and marking verification, thread condition inspection, torque record auditing, stretched-bolt detection, material traceability, matched nut grades

Gaskets

Covers verifying correct gasket type, dimensions and material against the joint specification to ASME B16.20, including spiral-wound colour codes and ring-joint ring numbers. It also covers inspecting gasket condition before installation, rejecting reused or damaged gaskets, and confirming correct ring-joint ring selection and seating.

Key skills

Gasket type and material verification, B16.20 identification, pre-installation condition inspection, reuse rejection, RTJ ring number and groove checks

Lubrication

Covers verifying that the specified lubricant is used on threads and nut-bearing surfaces, and checking lubrication coverage during in-process inspection. It explains how friction variation undermines achieved bolt load and the validity of torque-based inspection acceptance.

Key skills

Specified lubricant verification, coverage checks, friction and nut-factor effects, contamination control, lubricant recording

Bolting tools and equipment

Covers verifying the calibration status of torque wrenches and hydraulic torque and tensioning equipment, and checking tensioner and torque tool setup during in-process inspection. It also covers tool accuracy, correct operating technique and the verification records that link tools to completed joints.

Key skills

Calibration verification, pressure-to-torque chart checks, tensioner setup checks, technique monitoring, equipment traceability records

Assembly of flanges

Covers pre-tightening inspection including component verification and the joint register, in-process inspection of tightening pattern, incremental passes, lubricant and tool settings, and post-assembly inspection of uniform gap, bolt protrusion and final torque verification. It also covers joint acceptance and rejection, nonconformance documentation, leak investigation and joint integrity records.

Key skills

Hold-point verification, pattern and pass monitoring, gap and protrusion acceptance checks, NCR documentation, leak investigation, joint record sign-off

API-BFJI practice test — quick questions

Is this API-BFJI practice test free?

Yes — the 10 questions on this page are completely free, with no signup and no payment details needed.

How many questions are in the full API-BFJI set?

80 questions. The 10 free questions above are a sample of that full set, in the same style and topic balance.

Does the free test show the answers?

Yes — every question shows the correct answer with an explanation, and Ask AI can explain the concept behind a question in plain words if you want to go deeper.

Practice Tests Related to API-BFJI