Loading demo links...
About the PVIS Free Practice Test
This page holds a free practice test for the PV Installer Specialist (PVIS) certification from NABCEP. You will find 10 free questions, drawn from the full Study4Pass practice set of 80 questions for this exam. The questions follow the owner blueprint (Photovoltaic Specialists: Job Task Analysis (September 2017, V. 02.21) — the combined Specialist JTA published by NABCEP for PVDS, PVIS and PVCMS), weighted as NABCEP publishes them.
How to use this PVIS free practice test
Pick an answer for each question and check it straight away — the correct answer and a full explanation appear under the question. There is no time limit and nothing to sign up for. When an explanation is not enough, use Ask AI: this is an AI-Enabled practice test, and Ask AI explains the concept behind the question in plain language. Ready for more? The full 80-question set adds a timed Exam Simulation mode, topic training for your weak areas, and a flagged-question review.
What to study for each PVIS domain
Develop safety plan
Hazard assessment; Job hazard analysis; Stop-work authority; Emergency planning; Heat illness prevention.
Safeguard against hazards
Energised-array awareness; Voltage verification; PPE and insulated tools; LOTO with live DC sources; Ladder and utility-line safety.
Install raceways
Conduit types and fill; Bending and support; Sealing transitions; Conductor protection.
Install electrical equipment
Inverter and disconnect mounting; Clearances; Terminal landing and torque; Backfed breaker placement and labels.
Install DC PV system conductors
PV wire selection; Polarity and voltage checks; Listed connector mating; Lead support and protection.
Install AC PV system conductors
AC sizing from inverter output; Voltage rise; Neutral/ground separation; Energisation checks.
Install grounding & bonding
Bonding of frames and racking; Grounding electrode system; Jumpers and continuity; Corrosion-aware hardware.
Complete utility interconnection point
Point-of-interconnection checks; Supply-side tap rules; PTO discipline; Utility metering requirements.
Install system monitoring, control, and communication hardware
CT orientation; Gateway connection; Live data verification.
Install battery equipment
Battery mounting and clearances; DC protection; Backup panel configuration; BMS communications.
Install ground-mounted structure
Utility locates; Post setting and tolerances; Foundations and frost; Trenching and burial depth.
Install building-mounted system
Rafter location; Flashing every penetration; Standoff and rail alignment; Fall-safe work methods.
Install PV modules
Module handling; Model and condition verification; Clamp zones and torque; Lead dressing and records.
PVIS practice test — quick questions
Is this PVIS practice test free?
Yes — the 10 questions on this page are completely free, with no signup and no payment details needed.
How many questions are in the full PVIS set?
80 questions. The 10 free questions above are a sample of that full set, in the same style and topic balance.
Does the free test show the answers?
Yes — every question shows the correct answer with an explanation, and Ask AI can explain the concept behind a question in plain words if you want to go deeper.