M1 Residential Mechanical Inspector โ Exam Overview
Quick Facts
M1 - Residential Mechanical Inspector - is an International Code Council (ICC) National certification examination. Per ICC's content outline (m1_content.pdf), the exam has "60 multiple-choice questions", a "2-hour limit" and is "Open book" (exact wording as printed in the outline). Its outline has 7 domains: General Administration (10%); Heating/Cooling/Water Heaters (21%); Exhaust and Ventilation Systems (9%); Duct Systems (8%); Combustion Air (19%); Chimneys and Vents (18%); Fuel Supply Systems (15%). This Study4Pass practice bank contains 80 original practice questions aligned to that outline.
Who this exam is for
Residential mechanical inspectors - and candidates preparing for ICC's M1 certification - who inspect dwelling heating, cooling, water heating, exhaust, duct, combustion air, chimney and vent, and fuel supply installations.
Exam Domains
General Administration โ 10%
Domain 01 of ICC's content outline for the M1 examination (m1_content.pdf), covering project administration - approved plans, valid permits and approved products installed per their listing - public information and legal duties, and verification that the manufacturer's installation instructions and the listing of the equipment have been followed.
Heating/Cooling/Water Heaters โ 21%
Domain 02 of ICC's content outline for the M1 examination, covering heating equipment, water heaters and boilers, cooling and refrigeration, and other fuel-burning systems, each verified against the code, the manufacturer's instructions and the equipment listing, with proper access, clearances, supply and return air and duct connections.
Exhaust and Ventilation Systems โ 9%
Domain 03 of ICC's content outline for the M1 examination, covering exhaust fans and kitchen range hoods with required mechanical ventilation, and clothes dryer exhaust duct installations.
Duct Systems โ 8%
Domain 04 of ICC's content outline for the M1 examination, covering duct construction and installation - acceptable materials, support and insulation - and correct use and application of ducts and plenums, including sizing of supply and return air ducts.
Combustion Air โ 19%
Domain 05 of ICC's content outline for the M1 examination, covering proper sources of air supply for fuel-burning appliances and the size and location of openings, and the materials and installation of combustion air ducts.
Chimneys and Vents โ 18%
Domain 06 of ICC's content outline for the M1 examination, covering venting of fuel-burning appliances - size, type, location, clearances, connections and terminations - chimney and vent connectors, factory-built chimneys and fireplaces, and masonry chimneys and fireplaces.
Fuel Supply Systems โ 15%
Domain 07 of ICC's content outline for the M1 examination, covering gas piping installation, sizing, materials and supports with testing for tightness, fittings, valves, connections and material transitions, and oil piping and storage.
Preparing for M1
Work through the practice questions in study mode first, read every explanation, then switch to timed practice. Weight your revision by the domain weightings above and revisit the topics you score lowest on until your practice scores are consistent.
Write Your Review on M1 Residential Mechanical Inspector
M1 Customer Reviews
No reviews yet
Be the first to share your experience with this exam.