P2 Commercial Plumbing Inspector 2015 โ Exam Overview
Quick Facts
P2 โ Commercial Plumbing Inspector 2015 โ is an International Code Council (ICC) National certification examination. Per ICC's content outline (p2_content.pdf), the exam has 60 multiple-choice questions with a 2-1/2- hour time limit and is "Open book" (exact wording as printed). Its outline domains are: General Requirements (8%); Fixtures (15%); Water Heaters (12%); Water Supply and Distribution (18%); Sanitary Drainage (13%); Vents (15%); Traps, Interceptors, Separators, Special Piping, and Storage Systems (9%); Storm Drainage (5%); Health Care Plumbing (5%). This Study4Pass practice bank contains 80 original practice questions aligned to that outline.
Who this exam is for
Commercial plumbing inspectors preparing for ICC's P2 Commercial Plumbing Inspector certification (the outline title as printed carries the 2015 suffix), who inspect fixtures, water heaters, supply, drainage, venting and storm systems in commercial buildings.
Exam Domains
General Requirements โ 8%
Domain 01 of ICC's content outline for the P2 Commercial Plumbing Inspector examination (p2_content.pdf), covering protection of piping from corrosion, stress, freezing and physical damage, and piping installation, support, sleeving, penetrations and required testing.
Fixtures โ 15%
Domain 02 of ICC's content outline for the P2 examination, covering fixture and material approvals, installation, location, clearance and access, maximum and minimum flow rates and temperature-control valves, and accessible fixture installation.
Water Heaters โ 12%
Domain 03 of ICC's content outline for the P2 examination, covering water-heater installation (materials, listing, clearances, pans, seismic restraint, T&P valve and discharge piping, thermal expansion) and the gas piping, combustion air and venting serving them.
Water Supply and Distribution โ 18%
Domain 04 of ICC's content outline for the P2 examination, covering approved materials, joints and connections; service and distribution sizing, pressure, identification, valving and insulation; protection of potable water against contamination and water treatment; and nonpotable distribution systems.
Sanitary Drainage โ 13%
Domain 05 of ICC's content outline for the P2 examination, covering drainage materials and fittings, sizing and installation of the building drain, sewer, branches and stacks, backwater valves, sumps, ejectors and cleanouts, and indirect waste with air breaks and air gaps.
Vents โ 15%
Domain 06 of ICC's content outline for the P2 examination, covering vent materials, joints, connections and grade, and vent sizing, methods and installation โ the system that protects trap seals from siphonage and back-pressure.
Traps, Interceptors, Separators, Special Piping, and Storage Systems โ 9%
Domain 07 of ICC's content outline for the P2 examination, covering installation of traps, interceptors and separators, and chemical treatment, high-temperature and neutralization systems.
Storm Drainage โ 5%
Domain 08 of ICC's content outline for the P2 examination, covering roof drains, conductors and leaders (materials, sizing and installation) and sub-soil drains, sumps and pumping systems.
Health Care Plumbing โ 5%
Domain 09 of ICC's content outline for the P2 examination, covering health-care plumbing materials and fixture installation, and service and distribution piping in health-care facilities, including protection of the potable supply in a high-risk setting.
Preparing for P2
Work through the practice questions in study mode first, read every explanation, then switch to timed practice. Weight your revision by the domain weightings above and revisit the topics you score lowest on until your practice scores are consistent.
Write Your Review on COMMERCIAL-PLUMBING-INSPECTOR-2015-P2 Commercial Plumbing Inspector 2015
COMMERCIAL-PLUMBING-INSPECTOR-2015-P2 Customer Reviews
No reviews yet
Be the first to share your experience with this exam.