Question 1
(Technical Mathematics)An inspector adds two shim thicknesses of 3/8 inch and 5/16 inch. What is the combined thickness?
Select an option, then click Submit answer.
- ○ 11/16 inch
- ○ 8/16 inch
- ○ 15/16 inch
- ○ 3/4 inch
Showing 1–10 of 10 questions
Select an option, then click Submit answer.
Select an option, then click Submit answer.
Select an option, then click Submit answer.
Select an option, then click Submit answer.
Select an option, then click Submit answer.
Select an option, then click Submit answer.
Select an option, then click Submit answer.
Select an option, then click Submit answer.
Select all that apply, then click Submit answer.
Select all that apply, then click Submit answer.
This page holds a free practice test for the Certified Quality Inspector (CQI) certification from ASQ. You will find 10 free questions, drawn from the full Study4Pass practice set of 75 questions for this exam. The questions follow the same topic balance as the real exam: Technical Mathematics; Metrology; Inspection and Test; Quality Assurance and Improvement.
Pick an answer for each question and check it straight away — the correct answer and a full explanation appear under the question. There is no time limit and nothing to sign up for. When an explanation is not enough, use Ask AI: this is an AI-Enabled practice test, and Ask AI explains the concept behind the question in plain language. Ready for more? The full 75-question set adds a timed Exam Simulation mode, topic training for your weak areas, and a flagged-question review.
Covers basic shop math with fractions, decimals, squares, square roots, truncating, rounding, and percent change, plus basic algebra and geometry for areas, perimeters, and volumes. It also addresses basic trigonometry with sine, cosine, tangent, and the Pythagorean theorem, English and metric measurement conversions, numeric conversions such as scientific notation, and basic statistics including central tendency, dispersion, proportions, graphical displays, and the normal distribution.
shop math with fractions and decimals, percent change, first-degree equations, area and volume, Pythagorean theorem, sine cosine and tangent, inch to metric conversions, scientific notation, mean median and mode, range and standard deviation, normal distribution
Covers common variable, attribute, and transfer gauges and measurement scales, including micrometers, calipers, dial indicators, pin and thread gauges, telescoping gauges, gauge blocks, and coordinate measuring machines. It also addresses special and automated gauging, the 10:1 rule, gauge selection, handling, storage, and correlation, surface plate tools and angle measurement, specialised equipment for mass, finish, profile, and optical measurement, calibration systems and traceability, and measurement system analysis.
micrometers and calipers, dial indicators, attribute and transfer gauges, gauge blocks, 10:1 rule, gauge selection and handling, sine bars and surface plate work, optical comparators and profilometers, calibration and traceability, bias, repeatability and reproducibility
Covers blueprints, engineering drawings, and model based definitions, including title and revision blocks, ASME Y14.5 GD&T terminology and symbols, position and bonus tolerances, and datum structure and part alignment. It also addresses sampling concepts such as AQL, random sampling, lot and sample size, acceptance numbers, and sampling plans, inspection planning and types, inspection errors, product traceability, nonconforming material identification, severity, and disposition, testing methods, and software for test equipment.
blueprint and drawing interpretation, GD&T symbols, position and bonus tolerance, datum structure, AQL and sampling plans, acceptance numbers, first-article and incoming inspection, nonconforming material control, nondestructive and destructive testing, hardness and leak testing
Covers quality improvement terms and concepts such as defect prevention, cost of poor quality, total quality management, and customer satisfaction, plus quality audits, their process, tools, and corrective action requests. It also addresses the basic quality tools, statistical process control with common and special cause variation, control and specification limits, variables and attributes charts, and process capability, problem-solving and continuous improvement techniques such as PDCA, lean, 5S, DMAIC, FMEA, and CAPA, and supporting resources and documentation.
cost of poor quality, audit types and process, Pareto charts and cause and effect diagrams, histograms and check sheets, common and special cause variation, X-bar and R and p charts, Cp and Cpk, PDCA and DMAIC, FMEA, 5 Whys and error-proofing
Yes — the 10 questions on this page are completely free, with no signup and no payment details needed.
75 questions. The 10 free questions above are a sample of that full set, in the same style and topic balance.
Yes — every question shows the correct answer with an explanation, and Ask AI can explain the concept behind a question in plain words if you want to go deeper.