CQT Certified Quality Technician — Exam Overview
Quick Facts
The ASQ Certified Quality Technician (CQT) exam costs $460 and contains 110 questions in total, of which 100 are scored, with 4 hours and 18 minutes of exam time. Candidates must have 4 years of experience. Like all ASQ exams, the CQT exam is open book and is delivered by computer-based testing through Prometric, and passing requires a scaled score of 550.
Who this exam is for
Quality technicians who support quality engineers and supervisors in inspecting and testing products, collecting and analysing data, calibrating measurement equipment, and participating in audits and corrective action.
Exam Domains
Quality Concepts and Tools — 19%
Covers internal and external customers and suppliers, quality principles for products and processes including fitness for use and PPAP, standards and specifications, and the four cost of quality categories. It also covers the seven basic quality tools, problem-solving techniques such as 5 Whys and 8D, lean concepts such as 5S and value-stream mapping, continuous improvement including PDCA and DMAIC, and the ASQ Code of Ethics.
Statistical Techniques — 17%
Covers statistical terminology including population, sample, parameter, and statistic, the normal distribution and area under the curve, and confidence levels and limits. It also covers calculations for mean, median, mode, standard deviation, range, and variance, variables and attributes control charts, control limits versus specification limits, process capability indices Cp, Cpk, Pp, and Ppk, and common versus special cause variation.
Metrology and Calibration — 16%
Covers types of measurement and test equipment including hand tools, gauges, optical tools, coordinate measuring machines, electronic equipment, balances, surface plates and analysers, and force tools. It also addresses identification, control, and maintenance of M&TE, customer-supplied equipment, calibration intervals based on usage and risk, interpretation of calibration results, causes of calibration error, and the hierarchy of standards.
Inspection and Test — 21%
Covers reading and interpreting drawings, geometric dimensioning and tolerancing per ASME Y14.5, and classification of defect characteristics as critical, major, and minor. It also covers measurement types, gauge selection, measurement system analysis including gauge R&R, bias, and linearity, rounding rules and unit conversions, inspection points from receiving to final, inspection error, traceability, certificates of compliance and analysis, sampling plans and AQL, and control of nonconforming material including the material review board.
Quality Audits — 13%
Covers audit types including internal, external, system, product, process, and virtual audits, and first-, second-, and third-party audits. It also covers audit components from purpose, scope, and planning through opening and closing meetings, grading of findings as major, minor, or observational, reporting, and verification of corrective action, plus audit tools such as checklists, objective evidence, and forward and backward tracing.
Risk Management — 14%
Covers risk assessment and mitigation methods including trend analysis with SPC, design and process FMEA, root cause analysis, control plans, and risk inputs such as customer complaints and warranty returns. It also covers the corrective action process from problem identification and containment through root cause determination, permanent action, implementation, and effectiveness confirmation, and the preventive action process including mistake-proofing, lessons learned, and read-across.
Preparing for CQT
Work through the practice questions in study mode first, read every explanation, then switch to timed practice. Weight your revision by the domain weightings above and revisit the topics you score lowest on until your practice scores are consistent.
Write Your Review on CQT Certified Quality Technician
CQT Customer Reviews
No reviews yet
Be the first to share your experience with this exam.