Free 2V0-41-24 – Vmware 2V0-41-24 Practice Test Question

Select an option, then click Submit answer.

• ○ Display how the different NSX components are interconnected.
• ○ Display the VMs connected to Segments.
• ○ Display how the Physical components are interconnected.
• ○ Display the uplinks configured on the Tier-1 Gateways.
• ○ Display the uplinks configured on the Tier-0 Gateways.

Select an option, then click Submit answer.

• ○ NSX Autonomous Edge
• ○ NSX Edge
• ○ NSX for vSphere Edge
• ○ 3rd party Hardware VPN Device

Select an option, then click Submit answer.

• ○ MTU should be set to 1700 or greater across the data center network including inter-data center connections.
• ○ MTU should be set to 1500 or less only on inter-data center connections.
• ○ Configure Path MTU Discovery and rely on fragmentation.
• ○ MTU should be set to 1550 or less across the data center network including inter-data center connections.

Select an option, then click Submit answer.

• ○ Host Standby Router Protocol (HSRP)
• ○ Beacon Probing (BP)
• ○ Virtual Router Redundancy Protocol (VRRP)
• ○ Bidirectional Forwarding Detection (BFD)

Select an option, then click Submit answer.

• ○ Port NAT
• ○ 1:1 NAT
• ○ Destination NAT
• ○ Reflexive NAT
• ○ Source NAT

Select an option, then click Submit answer.

• ○ esxcli system syslog config logger set --id=nsxmanager
• ○ get support-bundle file vcpnv.tgz
• ○ vm-support
• ○ set support-bundle file vcpnv.tgz

Select an option, then click Submit answer.

• ○ esxcli network firewall ruleset set -a -e false
• ○ esxcli network firewall ruleset set -r syslog -e false
• ○ esxcli network firewall ruleset -e syslog
• ○ esxcli network firewall ruleset set -r syslog -e true

Select an option, then click Submit answer.

• ○ None
• ○ Read
• ○ Auditor
• ○ Full Access
• ○ Network Admin
• ○ Enterprise Admin
• ○ LB Operator

Select an option, then click Submit answer.

• ○ IPSec VPN services can be configured at Tier-0 and Tier-1 gateways.
• ○ Dynamic routing is supported for any IPSec mode in NSX.
• ○ IPSec VPNs use the DPDK accelerated performance library.
• ○ VPNs can be configured on the command line interface on the NSX manager.