Free 1z0-820 – Upgrade to Oracle Solaris 11 System Administrator Practice Test Question

Select all that apply, then click Submit answer.

• ○

  Create a local IPS repository on the AI Install server and start the repository server service, the publisher origin to the repository file.

• ○

  Set up a IP address on the AI install server.

• ○

  The DHCP server must be enabled on the install server and must provide the DHCP service for the clients.

• ○

  DHCP must be available on the network for the Install server and the clients, but the install server does not need to be the DHCP server.

• ○

  Download the AI boot image. The image must be the same version as the Oracle Solaris OS that you plan to install on the client.

• ○

  Download the text install image into the IPS repository.

• ○

  Install the AI installation tools.

• ○

  Create the AI install service. Specify the path to the AI network boot image ISO file and the path where the AI net image ISO file should be unpacked.

• ○

  Create the AI install service. Specify the path to the AI network boot image ISO file and the path to the IPS repository.
  
  

Select all that apply, then click Submit answer.

• ○

  forwarding=on has not been configured for SystemA and SystemB.

• ○

  forwarding=on has not been configured for the global zone of SystemA.

• ○

  There are missing entries for SystemA and SystemB in /etc/inet/hosts.

• ○

  forwarding=on has not been configured for zone1 and zone2 of SystemA.

• ○

  ARP table entries on SystemA and SystemB are incomplete for vnic1 and vnic2.

• ○

  SystemB and SystemC require a static route to the 172.16.0.x network via 192.168.1.20.
  
  

Select all that apply, then click Submit answer.

• ○

  terminal = zterms

• ○

  name_service-NTS+

• ○

  timezone=US/pacific

• ○

  system_locale=en_US

• ○

  network_interface=PRIMARY

• ○

  root_password=rJmvLUXM10cU
  
  

Select all that apply, then click Submit answer.

• ○

  32-bit SPARC hardware support

• ○

  32-bit x86 hardware support

• ○

  SPARC Enterprise M-series servers

• ○

  all Sun Netra series servers

• ○

  Oracle Solaris Containers for Linux applications
  
  

Select all that apply, then click Submit answer.

• ○

  iSCSI devices can be used as dump devices.

• ○

  SCSI commands are carried over IP networks and enable you to mount disk devices from across the network onto your local system.

• ○

  Large amounts of data can be transferred over an IP network with very little network degradation.

• ○

  COMSTAR allows you to convert any Solaris11 host into a SCSI target device that can be accessed over a storage network.

• ○

  One IP port can handle multiple ISCSI target devices.
  
  

Select an option, then click Submit answer.

• ○

  Create a snapshot of the UFS file system.
  Create the new ZFS file system.
  Use cpio to copy data from the snapshot to the new ZFS file system.

• ○

  Create a new Boot Environment.
  Create the ZFS file system.
  Use lucreate -m to copy data from the Current UFS file system to the new ZFS file system.

• ○

  Mirror the existing UFS file system by using SVM.
  After both submissions are in sync, migrate one of the submissions to a ZFS file System by using Live Upgrade.

• ○

  Create the new ZFS file system by using zfs create import to import data from the existing UFS file system into the new ZFS file system

• ○

  Create the new zfs file system by using the zfs create -o shadow.
  
  

Select an option, then click Submit answer.

• ○

  A message will be logged with syslogd when the number of notice messages generated by the resource control threshold meets or exceeds the value specified with [count].

• ○

  A message will be logged with sysloqd when the number of violations generated by the resource control threshold meets or exceeds the value specified with [count].

• ○

  The global resource control monitoring for the task.max-lwps resource control has been enabled and syslog messaging for that resource control has been set to notice. However, because the [count] value has not been specified, there is no threshold set for the resource to monitor. The configuration to monitor the task.max-lwps resource control is incomplete.

• ○

  The global resource control monitoring for the task.max-lwps resource control has been enabled. syslog messaging for that resource control has been set to notice.
  
  

Select an option, then click Submit answer.

• ○

  zonecfg -z testzone2 < testzone.cfg

• ○

  zonecfg -z testzone2 import testzone.cfg

• ○

  zoneadm -z testzone2 clone testzone.cfg

• ○

  zonecfg -z testzone2 -f testzone.cfg
  
  

Select an option, then click Submit answer.

• ○

  An ether stub

• ○

  A virtual router

• ○

  A virtual switch

• ○

  A virtual bridge.

• ○

  A virtual network interface

• ○

  Nothing because a virtual switch is automatically created then the virtual network interfaces are created.
  
  

Select an option, then click Submit answer.

• ○

  Issue the pkgrepo refresh -s command to refresh the repository.

• ○

  Restart the svc:/application/pkg/server:default service.

• ○

  pkg set-publisher command to set the new repository location.

• ○

  Issue the pkgrepo rebuild command to rebuild the repository.

• ○

  Issue the pkgrepo set command to set the new repository location.