Free 4A0-C01 – Nokia NRS II Composite Exam Practice Test Question

Select all that apply, then click Submit answer.

• ○

  DSCP marking

• ○

  Class of Service Marking

• ○

  DSAP marking

• ○

  ICMP type
  

Select all that apply, then click Submit answer.

• ○

  This configuration already is configured for FRR.

• ○

  fast-reroute facility

• ○

  fast-reroute one-to-one

• ○

  secondary

• ○

  standby
  

Select all that apply, then click Submit answer.

• ○

  Level 0

• ○

  Level 1

• ○

  Level 2

• ○

  Level 0/1

• ○

  Level 1/2
  

Select all that apply, then click Submit answer.

• ○

  Router LSA

• ○

  Network LSA

• ○

  Summary Network LSA

• ○

  Summary Router LSA
  

Select all that apply, then click Submit answer.

• ○

  sap 1/1/1

• ○

  sap 1/1/1:*

• ○

  sap 1/1/1:*.0

• ○

  sap 1/1/1:0*

• ○

  sap 1/1/1:200.*

• ○

  sap 1/1/1:300:200
  

Select all that apply, then click Submit answer.

• ○

  The SDP must be a mesh

• ○

  The SDP must be a spoke.

• ○

  Once the SDP is configured on both PE routers, both the services will be operationally up without further configuration changes.

• ○

  The Layer 2 MTUs must match between the IES and the VPLS

• ○

  The Layer 2 MTU must be 14 bytes smaller on the VPLS than it is on the IES.
  

Select all that apply, then click Submit answer.

• ○

  RIPv2-TE

• ○

  CSPF

• ○

  OSPF-TE

• ○

  ISIS-TE

• ○

  RSVP-TE
  

Select all that apply, then click Submit answer.

• ○

  Fast reroute capability

• ○

  Control traffic prioritization

• ○

  Route redistribution

• ○

  Traffic engineering extensions

• ○

  Cut through forwarding
  

Select all that apply, then click Submit answer.

• ○

  Each router requires 1 VPLS service.

• ○

  Each router requires 2 VPLS services.

• ○

  Each router requires 1 SDP with 2 LSPs, one to each of the other 2 routers.

• ○

  Each router requires 2 SDPs.

• ○

  Each router requires 3 SDPs
  

Select all that apply, then click Submit answer.

• ○

  To test the ability of reaching the far-end IP address of an SDP within the SDP encapsulation

• ○

  To determine the path MTU to the far-end IP address over an SDP.

• ○

  To determine the service MTU of the service using an SDP.

• ○

  To determine the presence of hosts using the service
  

Select an option, then click Submit answer.

• ○

  Tunnel Label

• ○

  VC Label

• ○

  Operational Control Word

• ○

  UNI

• ○

  NNI
  

Select an option, then click Submit answer.

• ○

  Link TLVs are used to advertise administrative group information.

• ○

  Link TLVs are exchanged once RSVP is enabled on the interfaces.

• ○

  Link TLVs are used to advertise router-IDs.

• ○

  Link TLVs are used to advertise bandwidth information.
  

Select an option, then click Submit answer.

• ○

  The route policy should be applied as an import policy.

• ○

  The route policy should say "from protocol isis" instead of "from protocol direct".

• ○

  The ASBR configuration should be removed.

• ○

  The interface between routers R1 and R3 must be in OSPF area 0.
  

Select an option, then click Submit answer.

• ○

  Each router requires 1 SDP.

• ○

  Each router requires 2 SDPs.

• ○

  Each router requires 3 SDPs.

• ○

  Each router requires 6 SDPs.
  

Select an option, then click Submit answer.

• ○

  2

• ○

  3

• ○

  4

• ○

  5

• ○

  6

• ○

  10
  

Select an option, then click Submit answer.

• ○

  Type 1

• ○

  Type 3

• ○

  Type 4

• ○

  Type 7
  

Select an option, then click Submit answer.

• ○

  The destination IP address will be the system IP address of router R1 and the destination MAC address will be the MAC address of the router R1 port connected to the PC.

• ○

  The destination IP address will be the IP address of the router R1 port connected to the PC and the destination MAC address will be the MAC address of the router R1 port connected to the PC.

• ○

  The destination IP address will be the IP address of the server and the destination MAC address will be the MAC address of the server.

• ○

  The destination IP address will be the IP address of the server and the destination MAC address will be the MAC address of the router R1 port connected to the PC.
  

Select an option, then click Submit answer.

• ○

  ADSPEC sets an SDP's MTU to the smallest MTU value found along the LSP path.

• ○

  RSVP must be enabled on all MPLS routers of a path to use ADSPEC.

• ○

  ADSPEC can automatically adjust the service MTU.

• ○

  ADSPEC can be enabled on individual LSPs.
  

Select an option, then click Submit answer.

• ○

  Independent control mode, downstream on demand

• ○

  Independent control mode, downstream unsolicited

• ○

  Ordered control mode, downstream on demand

• ○

  Ordered control mode, downstream unsolicited
  

Select an option, then click Submit answer.

• ○

  The router 10.10.10.1 is a PLR providing node protection for the router 10.10.10.3.

• ○

  One-to-one fast reroute protection is requested by an LSP.

• ○

  The bypass-link tunnel is used to avoid the link with the egress interface address 10.3.4.4.

• ○

  The bypass-node tunnel is used to avoid the next-hop downstream router 10.10.10.3.