Free NS0-502 – NetApp Certified Implementation Engineer - SAN,Data ONTAP 7-Mode Practice Test Question

Select all that apply, then click Submit answer.

• ○

  control the network interfaces on the storage system that an initiator can access

• ○

  define authentication parameters(CHAP)

• ○

  limit the number of network interfaces advertised by the storage system

• ○

  define MPIO behavior
  

Select all that apply, then click Submit answer.

• ○

  Ethernet port on Management Console

• ○

  Ethernet port on RLM

• ○

  Ethernet port on host system

• ○

  Ethernet port on storage device

• ○

  Ethernet port on FC switch

• ○

  Ethernet switch ports being used
  

Select all that apply, then click Submit answer.

• ○

  NetApp storage system login information

• ○

  physical location of the rack in the data center

• ○

  storage controller configuration information

• ○

  rack identifying information

• ○

  location in the rack of NetApp storage controllers and storage shelves
  

Select all that apply, then click Submit answer.

• ○

  They provide the ability to take snapshots of local file systems.

• ○

  They provide properly set disk and HBA timeout values.

• ○

  They identify and set path priorities for NetApp LUNs.

• ○

  They provide SnapMirror/SnapVault integration.ns.
  

Select all that apply, then click Submit answer.

• ○

  There more paths to LUNs.

• ○

  Target port WWPNs will change on at least one controller.

• ○

  You must use hard zoning (zoning by ports).

• ○

  There are fewer paths to LUNs.

• ○

  hosts running Solaris since it does not support single_image cfmode
  

Select an option, then click Submit answer.

• ○

  multipathing software

• ○

  host-based file system

• ○

  host-based volume manager

• ○

  HBA driver
  

Select an option, then click Submit answer.

• ○

  50% on the host, 100% on the disk array

• ○

  100% on the host, 50% on the disk array

• ○

  50% on the host, 50% on the disk array

• ○

  100% on the host, 100% on the disk array
  

Select an option, then click Submit answer.

• ○

  You should look up the test results for a similar system in previous performance testing and use those numbers.

• ○

  You should work with the customer to understand their performance expectations and determine the minimum performance they require for the application this system will support.

• ○

  You should use the published maximum performance specifications for this system.

• ○

  You should use the published minimum performance specifications for this system.
  

Select an option, then click Submit answer.

• ○

  ALUA is a LUN attribute that is set.

• ○

  ALUA deals with Fibre Channel LUNs and is NOT appropriate for iSCSI.

• ○

  ALUA can be used for Windows 2003 and Windows 2008 disk management.

• ○

  A LUN can be mapped to an ALUA-enabled igroup and a non-ALUA-enabled igroup.
  

Select an option, then click Submit answer.

• ○

  host-based BootBIOS

• ○

  host-based multipathing

• ○

  host-based volume manager

• ○

  host-based clustered file system