Free NS0-593 – NetApp Certified Support Engineer ONTAP Specialist Practice Test Question

Select all that apply, then click Submit answer.

• ○

  Having an Essentials package enables you to convert to another licensing option.

• ○

  Capacity-based license packages support only single-node configurations.

• ○

  BYOL licenses are purchased directly from NetApp.

• ○

  AWS Marketplace contracts cannot be mixed with BYOL.

Select all that apply, then click Submit answer.

• ○

  There was a failed PSU in the switchover site.

• ○

  The ISLs were down between the sites.

• ○

  The site had unmirrored aggregates.

• ○

  An ISL link was not operating at 16Gbps.

Select all that apply, then click Submit answer.

• ○

  the NVMe subsystem

• ○

  the NVMe broadcast domain

• ○

  an NVMe LIF

• ○

  the NVMe namespace

• ○

  an NVMe LUN

Select all that apply, then click Submit answer.

• ○

  -mail-hosts

• ○

  -transport

• ○

  -proxy-url

• ○

  -to

Select all that apply, then click Submit answer.

• ○

  Disable the -vserver-fqdn parameter for the SVM DDNS services.

• ○

  Remove the NFS protocol from the cifs_01 data LIF.

• ○

  Enable the -use-secure parameter for the SVM DDNS services.

• ○

  Enable the -is-enabled parameter for the SVM DDNS services

Select an option, then click Submit answer.

• ○

  Replace the Twinax cable between Node 2, Interface e0b. and the NetApp CN1610 switch.

• ○

  Replace the motherboard on Node 2.

• ○

  Replace both NetApp CN1610 switches.

• ○

  Replace the NetApp CN1610 switch that connects to Node 2, interface e0b.

Select an option, then click Submit answer.

• ○

  The customer should be advised to exclude certain workflows to reduce use.

• ○

  High network exempt use could be a problem.

• ○

  You should immediately investigate further by gathering perfstat data and opening a support case.

• ○

  The CPU Is not a first-order monitoring metric for ONTAP.

Select an option, then click Submit answer.

• ○

  iSNS is not enabled on the storage virtual machine.

• ○

  The WWPN was not added to the initiator group.

• ○

  The iSCSI service is not enabled on the interface.

• ○

  CHAP is not configured correctly for the specified initiator.

Select an option, then click Submit answer.

• ○

  FlexGroup requires CIFS shares to be located in qtrees, which these clients do not support.

• ○

  FlexGroup requires CIFS shares to use the Continuously Available Feature, which these clients do not support.

• ○

  These systems use the SMQI protocol which Is an unsupported feature in FlexGroup

• ○

  These systems use Offloaded Data Transfer, which is an unsupported feature in FlexGroup.

Select an option, then click Submit answer.

• ○

  The cable is plugged in upside down.

• ○

  The incorrect cable is used.

• ○

  The ports are configured for 4x10Gbit instead of 40Gbit.

• ○

  The port has an incorrect SFP inserted.