Free JN0-664 – Service ProviderProfessional (JNCIP-SP) Practice Test Question

Select all that apply, then click Submit answer.

• ○

  On R4, create a policy to change the BGP next hop to itself and apply it to IBGP as an export policy

• ○

  Add the external interface prefix to the IGP routing tables

• ○

  Add the internal interface prefix to the BGP routing tables.

• ○

  On R4, create a policy to change the BGP next hop to 172.16.1.1 and apply it to IBGP as an export policy

Select all that apply, then click Submit answer.

• ○

  set protocols ospf overload timeout 900

• ○

  set protocols ospf3 realm ipv4-unicast overload timeout 900

• ○

  set protocols ospf overload

• ○

  set protocols oapf3 overload timeout 900

• ○

  set protocols ospf3 overload

Select all that apply, then click Submit answer.

• ○

  Source2 will use RP2 and Received will use RP2 for group 224.2.2.2.

• ○

  Source2 will use RP1 and Receiver2 will use RP1 for group 224.2.2.2.

• ○

  Source1 will use RP1 and Receiver1 will use RP1 for group 224.1.1.1.

• ○

  Source1 will use RP1 and Receiver1 will use RP2 for group 224.1 1 1

Select all that apply, then click Submit answer.

• ○

  You must configure family inet6 labcled-unicast between PE routers.

• ○

  You must configure family inet6 unicaat between PE and CE routers.

• ○

  You must configure family inet6 add-path between PE and CE routers.

• ○

  You must configure family inet6 unicast between PE routers

Select all that apply, then click Submit answer.

• ○

  R1 will prepend AS 65531 when advertising 10 0.0 0/16 to R2.
  

• ○

  R1 will advertise 10.0.0.0/16 to R2 with 192 168 1 1 as the next hop.
  

• ○

  R2 will advertise 10.0.0.0/16 to R3 with 192.168.1 1 as the next hop
  

• ○

  R4 will advertise 10 0.0 0/16 to R6 with 172.16 1 1 as the next hop
  

• ○

  R2 will advertise 10.0.0.0/16 to R4 with 172.16.1.1 as the next hop

Select an option, then click Submit answer.

• ○

  The packet will be discarded.

• ○

  The packet will be processed by the BA classifier first, then the MF classifier.

• ○

  The packet will be forwarded with no classification changes.

• ○

  The packet will be processed by the MF classifier first, then the BA classifier.

Select an option, then click Submit answer.

• ○

  Define a policy to tag routes with the appropriate bandwidth community.

• ○

  Disable multipath.

• ○

  Ensure that the metric-out parameter on the Gigabit Ethernet interface is higher than the 10 Gigibit Ethernet interface.

• ○

  Enable per-prefix load balancing.

Select an option, then click Submit answer.

• ○

  add-path

• ○

  multihop

• ○

  multipath

• ○

  route-target

Select an option, then click Submit answer.

• ○

  Configure the ignore-attached-bit parameter on all L2 routers.

• ○

  Configure all routers to allow wide metrics.

• ○

  Configure all routers to be L1.

• ○

  Configure the ignore-attached-bit parameter on all L1 routers

Select an option, then click Submit answer.

• ○

  By default on PE-2, the site's local ID is automatically assigned a value of 0 and must be configured to match the total number of attached sites.

• ○

  You must create a unique Layer 2 VPN routing instance for each site on the PE-2 device.

• ○

  You must use separate physical interfaces to connect PE-2 to each site.

• ○

  By default on PE-2, the remote site IDs are automatically assigned based on the order that you add the interfaces to the site configuration.