Free JN0-649 – Enterprise Routing and Switching Professional (JNCIP-ENT) Practice Test Question

Select all that apply, then click Submit answer.

• ○

  VXLAN could be implemented on your network across this service provider network.

• ○

  Each campus switch shown must have a C-Tag 300 configured.

• ○

  L2PT is required on the SP network to support the spanning tree protocol.

• ○

  Each campus switch shown must have S-Tag 300 configured.

Select all that apply, then click Submit answer.

• ○

  Verify the import policies on your router.

• ○

  Verify that the BGP routes are active in your routing table.

• ○

  Verify the export policies on your router.

• ○

  Verity that the multihop settings are configured on your router.

Select all that apply, then click Submit answer.

• ○

  Router E will replicate and send a copy of the received VXLAN packet to router D.

• ○

  Router C will send a VXLAN packet destined only to router D and router E.

• ○

  Router D will not replicate and send a copy of the received VXLAN packet to router E.

• ○

  Router C will send a single VXLAN packet to one remote VTEP.

Select all that apply, then click Submit answer.

• ○

  VLAN to instance mapping

• ○

  revision level

• ○

  configuration name

• ○

  bridge priority

• ○

  region name

Select all that apply, then click Submit answer.

• ○

  R1 does not participate in OSPF routing.

• ○

  Any traffic destined for networks that terminate on R1 will still be forwarded to R1.

• ○

  The metrics for all transit interfaces on R1 is set to the maximum value of 65,535.

• ○

  R1 participates in OSPF routing but does not send or receive transit traffic.

• ○

  R1 does not send or receive transit traffic during the maintenance window even if no alternative paths exist to the given destination.

Select an option, then click Submit answer.

• ○

  The OSPF protocol is first matched by find-ospf and accepted.

• ○

  The routes only timeout after 24 hours.

• ○

  The routes remain in the table until the device is rebooted.

• ○

  The routes remain in the table until the routing daemon is restarted.

Select an option, then click Submit answer.

• ○

  LSA flooding guarantees that all routers will receive them successfully.

• ○

  LSAs are sent over a TCP connection.

• ○

  LSAs are acknowledged by the neighboring router.

• ○

  LSAs are advertised with an acknowledgement bit.

Select an option, then click Submit answer.

• ○

  Q-in-Q all-in-one bundling

• ○

  PVLAN isolated VLAN

• ○

  MVRP registration normal

• ○

  EVPN-VXLAN anycast gateway

Select an option, then click Submit answer.

• ○

  The neighbor 10.30.100.3 statement is missing from leaf1’s configuration.

• ○

  The spine node is not configured for the family inet NLRI.

• ○

  The neighbor 10.30.100.6 statement is missing from spine1’s configuration.

• ○

  The leaf node is not configured for the family evpn NLRI.

Select an option, then click Submit answer.

• ○

  Adjust the scheduler for the expedited-forwarding forwarding class to support a higher transmit rate.

• ○

  Adjust the expedited-forwarding BA classifier to router B's ge-0/0/0 interface to support a higher transmit rate.

• ○

  Adjust the scheduler-map to support a higher transmit rate.

• ○

  Adjust the expedited-forwarding BA classifier on router B's ge-0/0/1 interface to support a higher transmit rate.