Free JN0-352 – Juniper Networks Certified Specialist Enterprise Routing and Switching Practice Test Question

Select an option, then click Submit answer.

• ○

  Set the local-preference attribute for all routes received from ISP A to 200 while all routes received from ISP B use the default local-preference value of 100.

• ○

  Prepend the AS path to all routes received from ISP A while all routes received from ISP B use the default AS path value.

• ○

  Change the MED value for all routes received from ISP A to 1 while all routes from ISP B remain configured with no MED value.

• ○

  Set the local-preference attribute for all routes received from ISP A to 50 while all routes received from ISP B use the default local-preference value of 100.
  

Select an option, then click Submit answer.

• ○

  You must enable the voice VLAN feature on the incoming interfaces and assign the v20 VLAN.

• ○

  You must enable an IRB interface and assign it to the v10 and v20 VLANs.

• ○

  You must enable LLDP-MED on the incoming interfaces and assign the v20 VLAN.

• ○

  You must enable the guest VLAN feature on the incoming interfaces and assign the v20 VLAN.
  

Select all that apply, then click Submit answer.

• ○

  The AS Path contains a 0.

• ○

  It is suppressed by a damping policy.

• ○

  The Local Preference is 0.

• ○

  The next hop is unreachable.

• ○

  It is rejected by a firewall term.
  

Select an option, then click Submit answer.

• ○

  set vlans default switch-options interface-mac-limit 4

• ○

  set vlans default switch-options interface-mac-limit 5

• ○

  set switch-options interface ge-0/0/23.0 interface-mac-limit 3

• ○

  clear ethernet-switching recovery-timeout interface ge-0/0/23.0
  

Select an option, then click Submit answer.

• ○

  route B

• ○

  route D

• ○

  route A

• ○

  route C
  

Select all that apply, then click Submit answer.

• ○

  The first table listed is the primary route table and determines the address family of the RIB group.

• ○

  The last table listed is the primary route table and determines the address family of the RIB group.

• ○

  A RIB group must contain one or more export-rib statements.

• ○

  A RIB group must contain one or more import-rib statements.
  

Select an option, then click Submit answer.

• ○

  600 seconds

• ○

  3600 seconds

• ○

  300 seconds

• ○

  1800 seconds
  

Select an option, then click Submit answer.

• ○

  Router A ge-0/0/2

• ○

  Router B ge-0/0/1

• ○

  Router A ge-0/0/1

• ○

  Router B ge-0/0/2
  

Select an option, then click Submit answer.

• ○

  User A and User D

• ○

  User C and User D

• ○

  User C

• ○

  User C, User A, and User D
  

Select an option, then click Submit answer.

• ○

  The frame is sent out all ports assigned to the associated VLAN except the ingress port on which the frame was received.

• ○

  The frame is sent out all ports assigned to all configured VLANs except the ingress port on which the frame was received.

• ○

  The frame is sent out all trunk ports associated with the ingress VLAN regardless of whether a matching MAC address was found in the bridge table.

• ○

  The frame is sent out the egress port with a matching destination MAC address within the bridge table associated with the ingress VLAN.