What is the Duration of ISC2 SSCP Exam?

The ISC SSCP exam is a three-hour exam consisting of 125 multiple-choice questions.

What are the Number of Questions Asked in ISC2 SSCP Exam?

The ISC SSCP exam consists of 125 multiple-choice questions.

What is the Passing Score for ISC2 SSCP Exam?

The passing score required in the ISC SSCP exam is 700 out of a maximum possible score of 1000.

What is the Competency Level required for ISC2 SSCP Exam?

The International Information Systems Security Certification Consortium (ISC)2 SSCP exam requires a minimum of 3-5 years of work experience in the IT security field, plus completion of the SSCP certification course. In addition, applicants must demonstrate knowledge and skills in seven domains, including access control, security operations and administration, risk identification, analysis and management, cryptography, and other topics related to IT security.

What is the Question Format of ISC2 SSCP Exam?

The ISC SSCP exam consists of 125 multiple-choice questions. The questions are designed to test a candidate's knowledge of the seven domains of the SSCP Common Body of Knowledge (CBK).

How Can You Take ISC2 SSCP Exam?

The ISC SSCP exam is available to be taken online or at a testing center. To take the exam online, you must register for an account with the ISC and purchase the exam. Once you have purchased the exam, you will receive an email with the exam link and instructions on how to take the exam. To take the exam at a testing center, you must register for an account with the ISC and then register for the exam at a Pearson VUE testing center. Once you have registered, you will receive an email with the exam date, time, and location.

What Language ISC2 SSCP Exam is Offered?

The ISC SSCP exam is offered in English.

What is the Cost of ISC2 SSCP Exam?

The cost of the ISC SSCP exam is $599.

What is the Average Salary of ISC2 SSCP Certified in the Market?

The average salary of Systems Security Certified Practitioner certified professionals varies widely by role, region, and experience, because it depends on the job the certification is combined with. Check current listings in your market for an up-to-date figure.

Who are the Testing Providers of ISC2 SSCP Exam?

The testing provider for the ISC2 SSCP exam is Pearson VUE, at authorized Pearson VUE test centers.

What is the Recommended Experience for ISC2 SSCP Exam?

The recommended experience for the ISC SSCP exam is 3-5 years of cumulative, paid, full-time work experience in one or more of the seven domains of the SSCP Common Body of Knowledge (CBK). This experience should include hands-on technical and/or managerial experience in the implementation, operations, and/or administration of IT systems.

What are the Prerequisites of ISC2 SSCP Exam?

The prerequisite for ISC SSCP Exam is that the candidate must have a minimum of one year of experience in the information security field. The candidate must also have a strong understanding of the seven domains of the SSCP Common Body of Knowledge (CBK).

What is the Expected Retirement Date of ISC2 SSCP Exam?

The ISC2 SSCP exam is the current version of the Systems Security Certified Practitioner exam, and ISC2 has not announced a retirement date for it. When ISC2 introduces a newer version, the retirement date for the older version is published on the ISC2 certification site.

What is the Difficulty Level of ISC2 SSCP Exam?

The difficulty level of the ISC SSCP exam is considered to be moderate.

What is the Roadmap / Track of ISC2 SSCP Exam?

The certification roadmap for the ISC SSCP exam is as follows: 1. Complete the SSCP certification training course. 2. Pass the SSCP exam. 3. Complete the ISC SSCP Certification Practical Application (CAPA) exam. 4. Pass the ISC SSCP Certification Practical Application (CAPA) exam. 5. Complete the ISC SSCP Certification Advanced Application (CAA) exam. 6. Pass the ISC SSCP Certification Advanced Application (CAA) exam. 7. Receive the ISC SSCP certification.

What are the Topics ISC2 SSCP Exam Covers?

ISC SSCP exam covers seven domains: 1. Access Controls: This domain covers the concept of access control, including physical and logical access, authentication, authorization and identity management. It also covers topics such as access control models, security architecture, and audit and monitoring. 2. Security Operations and Administration: This domain covers the concepts of security operations and administration, including security policies and procedures, user access management, system and application security, and incident response. 3. Risk Identification, Monitoring, and Analysis: This domain covers the concepts of risk identification, monitoring, and analysis, including risk management frameworks, threat and vulnerability management, and risk assessment. 4. Incident Response and Recovery: This domain covers the concepts of incident response and recovery, including incident response planning, response and containment, and recovery and restoration. 5. Cryptography: This domain covers the concepts of cryptography, including encryption algorithms, key management, digital signatures, and public key infrastructure.

What are the Sample Questions of ISC2 SSCP Exam?

1. What are the three primary goals of information security? 2. What are the key components of a security architecture? 3. What is the purpose of a security policy? 4. Describe the differences between a risk assessment and a vulnerability assessment. 5. What is the difference between a security incident and a security breach? 6. What is a business continuity plan and how is it used? 7. What is the purpose of risk management? 8. What are the different types of authentication methods? 9. Describe the different types of access control models. 10. What is the difference between a firewall and an intrusion detection system?

← Back to exam page

Free SSCP – System Security Certified Practitioner (SSCP) Practice Test Question

Free demo downloads

Loading demo links...

Showing 1–20 of 20 questions

Question 1 (Access Control)

To control access by a subject (an active entity such as individual or process) to an object (a passive entity such as a file) involves setting up:

Select an option, then click Submit answer.

○
Access Rules
○
Access Matrix
○
Identification controls
○
Access terminal

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 2 (Risk, Response and Recovery)

Which of the following best allows risk management results to be used knowledgeably?

Select an option, then click Submit answer.

○
A vulnerability analysis
○
A likelihood assessment
○
An uncertainty analysis
○
A threat identification

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 3 (Cryptography)

Which of the following is defined as an Internet, IPsec, key-establishment protocol, partly based on OAKLEY, that is intended for putting in place authenticated keying material for use with ISAKMP and for other security associations?

Select an option, then click Submit answer.

○
Internet Key exchange (IKE)
○
Security Association Authentication Protocol (SAAP)
○
Simple Key-management for Internet Protocols (SKIP)
○
Key Exchange Algorithm (KEA)

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 4 (Security Operation Adimnistration)

Which of the following statements pertaining to protection rings is false?

Select an option, then click Submit answer.

○
They provide strict boundaries and definitions on what the processes that work within each ring can access.
○
Programs operating in inner rings are usually referred to as existing in a privileged mode.
○
They support the CIA triad requirements of multitasking operating systems.
○
They provide users with a direct access to peripherals

Ask AI for More Explanation

— your own AI account, opens inside the app

Reference / correct answer:

They provide users with a direct access to peripherals

In computer science, hierarchical protection domains, often called protection rings, are mechanisms to protect data and functionality from faults (fault tolerance) and malicious behaviour (computer security). This approach is diametrically opposite to that of capability-based security.

Computer operating systems provide different levels of access to resources. A protection ring is one of two or more hierarchical levels or layers of privilege within the architecture of a computer system. This is generally hardware-enforced by some CPU architectures that provide different CPU modes at the hardware or microcode level.

Rings are arranged in a hierarchy from most privileged (most trusted, usually numbered zero) to least privileged (least trusted, usually with the highest ring number). On most operating systems, Ring 0 is the level with the most privileges and interacts most directly with the physical hardware such as the CPU and memory.

Special gates between rings are provided to allow an outer ring to access an inner ring's resources in a predefined manner, as opposed to allowing arbitrary usage. Correctly gating access between rings can improve security by preventing programs from one ring or privilege level from misusing resources intended for programs in another. For example, spyware running as a user program in Ring 3 should be prevented from turning on a web camera without informing the user, since hardware access should be a Ring 1 function reserved for device drivers. Programs such as web browsers running in higher numbered rings must request access to the network, a resource restricted to a lower numbered ring.

"They provide strict boundaries and definitions on what the processes that work within each ring can access" is incorrect. This is in fact one of the characteristics of a ring protection system.

"Programs operating in inner rings are usually referred to as existing in a privileged mode" is incorrect. This is in fact one of the characteristics of a ring protection system.

"They support the CIA triad requirements of multitasking operating systems" is incorrect. This is in fact one of the characteristics of a ring protection system.

Reference(s) used for this question:

CBK, pp. 310-311

AIO3, pp. 253-256

AIOv4 Security Architecture and Design (pages 308 - 310)

AIOv5 Security Architecture and Design (pages 309 - 312)

Question 5 (Network and Telecommunications)

The Logical Link Control sub-layer is a part of which of the following?

Select an option, then click Submit answer.

○
The ISO/OSI Data Link layer
○
The Reference monitor
○
The Transport layer of the TCP/IP stack model
○
Change management control

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 6 (Access Control)

Considerations of privacy, invasiveness, and psychological and physical comfort when using the system are important elements for which of the following?

Select an option, then click Submit answer.

○
Accountability of biometrics systems
○
Acceptability of biometrics systems
○
Availability of biometrics systems
○
Adaptability of biometrics systems

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 7 (Network and Telecommunications)

What protocol is used to match an IP address to the appropriate hardware address of the packet's destination so it can be sent?

Select an option, then click Submit answer.

○
Routing tables
○
Address resolution protocol (ARP)
○
Reverse address resolution protocol (RARP)
○
Internet Control Message Protocol (ICMP)

Ask AI for More Explanation

— your own AI account, opens inside the app

Reference / correct answer:

Address resolution protocol (ARP)

The Address Resolution Protocol (ARP) is used to match an IP address to an Ethernet address so the packet can be sent to the appropriate node.

Shon Harris in her book says:

MAC and IP addresses must be properly mapped so they can be correctly resolved. This happens through the Address Resolution Protocol (ARP). When the data link layer receives a frame, the network layer has already attached the destination IP address to it, but the data link layer cannot understand the IP address and thus invokes ARP for help.

ARP broadcasts a frame requesting the MAC address that corresponds with the destination IP address. Each computer on the subnet receives this broadcast frame, and all but the computer that has the requested IP address ignore it.

The computer that has the destination IP address responds with its MAC address. Now ARP knows what hardware address corresponds with that specific IP address. The data link layer takes the frame, adds the hardware address to it, and passes it on to the physical layer, which enables the frame to hit the wire and go to the destination computer.

ARP maps the hardware address and associated IP address and stores this mapping in its table for a predefined amount of time. This caching is done so that when another frame destined for the same IP address needs to hit the wire, ARP does not need to broadcast its request again. It just looks in its table for this information.

Man-In-The-Middle attack

Because ARP does not require authentication, an attacker could place bogus entries into the ARP cache of a remote host (gratuitous ARP replies) to carry out attacks, such as a man-in-themiddle attacks. This attack is called ARP poisoning.

The following answers were incorrect:

RARP is used to match an Ethernet address to an IP address.

ICMP is a management protocol whose function is to send message between network devices.

Routing tables are used by routers to choose the appropriate interface to route packets.

Reference(s) used for this question:

Harris, Shon (2012-10-25). CISSP All-in-One uide, 6th Edition, Chapter 6 Telecommunications and Network Security, Pages 580-581 or on the Kindle edition look around Locations 12298-12306. McGraw-Hill. Kindle Edition.

and

Schneiter, Andrew (2013-04-15). Official (ISC)2 Guide to the CISSP CBK , Third Edition: Telecommunications and Network Security, Page 342.

Question 8 (Network and Telecommunications)

Which of the following is NOT true about IPSec Tunnel mode?

Select an option, then click Submit answer.

○
Fundamentally an IP tunnel with encryption and authentication
○
Works at the Transport layer of the OSI model
○
Have two sets of IP headers
○
Established for gateway service
○
& KRAUSE, MICKI, Information Security Management Handbook, 4th Edition, Volume 2, 2001, CRC Press, NY, Pages 166-167.

Ask AI for More Explanation

— your own AI account, opens inside the app

Reference / correct answer:

Works at the Transport layer of the OSI model

IPSec can be run in either tunnel mode or transport mode. Each of these modes has its own particular uses and care should be taken to ensure that the correct one is selected for the solution:

Tunnel mode is most commonly used between gateways, or at an end-station to a gateway, the gateway acting as a proxy for the hosts behind it.

Transport mode is used between end-stations or between an end-station and a gateway, if the gateway is being treated as a host—for example, an encrypted Telnet session from a workstation to a router, in which the router is the actual destination.

As Figure 1 shows, basically transport mode should be used for end-to-end sessions and tunnel mode should be used for everything else. (Refer to the figure for the following discussion.) Figure 1 Tunnel and transport modes in IPSec.

Figure 1 displays some examples of when to use tunnel versus transport mode:

Tunnel mode is most commonly used to encrypt traffic between secure IPSec gateways, such as between the Cisco router and PIX Firewall (as shown in example A in Figure 1). The IPSec gateways proxy IPSec for the devices behind them, such as Alice's PC and the HR servers in Figure 1. In example A, Alice connects to the HR servers securely through the IPSec tunnel set up between the gateways.

Tunnel mode is also used to connect an end-station running IPSec software, such as the Cisco Secure VPN Client, to an IPSec gateway, as shown in example B.

In example C, tunnel mode is used to set up an IPSec tunnel between the Cisco router and a server running IPSec software. Note that Cisco IOS software and the PIX Firewall sets tunnel mode as the default IPSec mode.

Transport mode is used between end-stations supporting IPSec, or between an end-station and a gateway, if the gateway is being treated as a host. In example D, transport mode is used to set up an encrypted Telnet session from Alice's PC running Cisco Secure VPN Client software to terminate at the PIX Firewall, enabling Alice to remotely configure the PIX Firewall securely.

AH Tunnel Versus Transport Mode

Figure 2 shows the differences that the IPSec mode makes to AH. In transport mode, AH services protect the external IP header along with the data payload. AH services protect all the fields in the header that don't change in transport. The header goes after the IP header and before the ESP header, if present, and other higher-layer protocols.

In tunnel mode, the entire original header is authenticated, a new IP header is built, and the new IP header is protected in the same way as the IP header in transport mode.

Figure 2 AH tunnel versus transport mode.

AH is incompatible with Network Address Translation (NAT) because NAT changes the source IP address, which breaks the AH header and causes the packets to be rejected by the IPSec peer.

ESP Tunnel Versus Transport Mode

Figure 3 shows the differences that the IPSec mode makes to ESP. In transport mode, the IP payload is encrypted and the original headers are left intact. The ESP header is inserted after the IP header and before the upper-layer protocol header. The upper-layer protocols are encrypted and authenticated along with the ESP header. ESP doesn't authenticate the IP header itself.

NOTE Higher-layer information is not available because it's part of the encrypted payload.

When ESP is used in tunnel mode, the original IP header is well protected because the entire original IP datagram is encrypted. With an ESP authentication mechanism, the original IP datagram and the ESP header are included; however, the new IP header is not included in the authentication.

When both authentication and encryption are selected, encryption is performed first, before authentication. One reason for this order of processing is that it facilitates rapid detection and rejection of replayed or bogus packets by the receiving node. Prior to decrypting the packet, the receiver can detect the problem and potentially reduce the impact of denial-of-service attacks.

Figure 3 ESP tunnel versus transport mode.

ESP can also provide packet authentication with an optional field for authentication. Cisco IOS software and the PIX Firewall refer to this service as ESP hashed message authentication code (HMAC). Authentication is calculated after the encryption is done. The current IPSec standard specifies SHA-1 and MD5 as the mandatory HMAC algorithms.

The main difference between the authentication provided by ESP and AH is the extent of the coverage. Specifically, ESP doesn't protect any IP header fields unless those fields are encapsulated by ESP (tunnel mode). Figure 4 illustrates the fields protected by ESP HMAC.

Figure 4 ESP encryption with a keyed HMAC.

IPSec Transforms

An IPSec transform specifies a single IPSec security protocol (either AH or ESP) with its corresponding security algorithms and mode. Example transforms include the following:

The AH protocol with the HMAC with MD5 authentication algorithm in tunnel mode is used for authentication.

The ESP protocol with the triple DES (3DES) encryption algorithm in transport mode is used for confidentiality of data.

The ESP protocol with the 56-bit DES encryption algorithm and the HMAC with SHA-1 authentication algorithm in tunnel mode is used for authentication and confidentiality.

Transform Sets

A transform set is a combination of individual IPSec transforms designed to enact a specific security policy for traffic. During the ISAKMP IPSec security association negotiation that occurs in IKE phase 2 quick mode, the peers agree to use a particular transform set for protecting a particular data flow. Transform sets combine the following IPSec factors: Mechanism for payload authentication—AH transform

Mechanism for payload encryption—ESP transform IPSec mode (transport versus tunnel)

Transform sets equal a combination of an AH transform, plus an ESP transform, plus the IPSec mode (either tunnel or transport mode).

This brings us to the end of the second part of this five-part series of articles covering IPSec. Be sure to catch the next installment.

Cisco Press at: http://www.ciscopress.com/articles/printerfriendly.asp?p=25477 and

Source: TIPTON, Harold

F. & KRAUSE, MICKI, Information Security Management Handbook, 4th Edition, Volume 2, 2001, CRC Press, NY, Pages 166-167.

Question 9 (Risk, Response and Recovery)

Of the reasons why a Disaster Recovery plan gets outdated, which of the following is not true?

Select an option, then click Submit answer.

○
Personnel turnover
○
Large plans can take a lot of work to maintain
○
Continous auditing makes a Disaster Recovery plan irrelevant
○
Infrastructure and environment changes

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 10 (Security Operation Adimnistration)

Which of the following are the steps usually followed in the development of documents such as security policy, standards and procedures?

Select an option, then click Submit answer.

○
design, development, publication, coding, and testing.
○
design, evaluation, approval, publication, and implementation.
○
initiation, evaluation, development, approval, publication, implementation, and maintenance.
○
feasibility, development, approval, implementation, and integration.
○
& KRAUSE, MICKI, Information Security Management Handbook, 4th Edition, Volume 3, 2002, Auerbach Publications.

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 11 (Access Control)

Which division of the Orange Book deals with discretionary protection (need-to-know)?

Select an option, then click Submit answer.

○
D
○
C
○
B
○
A

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 12 (Cryptography)

Which of the following can best be defined as a key distribution protocol that uses hybrid encryption to convey session keys. This protocol establishes a long-term key once, and then requires no prior communication in order to establish or exchange keys on a session-by-session basis?

Select an option, then click Submit answer.

○
Internet Security Association and Key Management Protocol (ISAKMP)
○
Simple Key-management for Internet Protocols (SKIP)
○
Diffie-Hellman Key Distribution Protocol
○
IPsec Key exchange (IKE)

Ask AI for More Explanation

— your own AI account, opens inside the app

Reference / correct answer:

Simple Key-management for Internet Protocols (SKIP)

RFC 2828 (Internet Security Glossary) defines Simple Key Management for Internet Protocols (SKIP) as:

A key distribution protocol that uses hybrid encryption to convey session keys that are used to encrypt data in IP packets.

SKIP is an hybrid Key distribution protocol similar to SSL, except that it establishes a long-term key once, and then requires no prior communication in order to establish or exchange keys on a session-by-session basis. Therefore, no connection setup overhead exists and new keys values are not continually generated. SKIP uses the knowledge of its own secret key or private component and the destination's public component to calculate a unique key that can only be used between them.

IKE stand for Internet Key Exchange, it makes use of ISAKMP and OAKLEY internally.

Internet Key Exchange (IKE or IKEv2) is the protocol used to set up a security association (SA) in the IPsec protocol suite. IKE builds upon the Oakley protocol and ISAKMP. IKE uses X.509 certificates for authentication and a Diffie–Hellman key exchange to set up a shared session secret from which cryptographic keys are derived.

The following are incorrect answers:

ISAKMP is an Internet IPsec protocol to negotiate, establish, modify, and delete security associations, and to exchange key generation and authentication data, independent of the details of any specific key generation technique, key establishment protocol, encryption algorithm, or authentication mechanism.

IKE is an Internet, IPsec, key-establishment protocol (partly based on OAKLEY) that is intended for putting in place authenticated keying material for use with ISAKMP and for other security associations, such as in AH and ESP.

IPsec Key exchange (IKE) is only a detracto.

Reference(s) used for this question:

SHIREY, Robert W., RFC2828: Internet Security Glossary, may 2000.

and

http://en.wikipedia.org/wiki/Simple_Key-Management_for_Internet_Protocol and

http://en.wikipedia.org/wiki/Simple_Key-Management_for_Internet_Protocol

Question 13 (Network and Telecommunications)

Domain Name Service is a distributed database system that is used to map:

Select an option, then click Submit answer.

○
Domain Name to IP addresses.
○
MAC addresses to domain names.
○
MAC Address to IP addresses.
○
IP addresses to MAC Addresses.

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 14 (Risk, Response and Recovery)

A contingency plan should address:

Select an option, then click Submit answer.

○
Potential risks.
○
Residual risks.
○
Identified risks.
○
All answers are correct.

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 15 (Risk, Response and Recovery)

Which of the following items is NOT a benefit of cold sites?

Select an option, then click Submit answer.

○
No resource contention with other organisation
○
Quick Recovery
○
A secondary location is available to reconstruct the environment
○
Low Cost

Ask AI for More Explanation

— your own AI account, opens inside the app

Reference / correct answer:

Quick Recovery

A cold site is a permanent location that provide you with your own space that you can move into in case of a disaster or catastrophe. It is one of the cheapest solution available as a rental place but it is also the one that would take the most time to recover. A cold site usually takes one to two weeks for recoverey.

Although major disruptions with long-term effects may be rare, they should be accounted for in the contingency plan. The plan should include a trategy to recover and perform system operations at an alternate facility for an extended period. In general, three types of alternate sites are available:

Dedicated site owned or operated by the organization. Also called redundant or alternate sites; Reciprocal agreement or memorandum of agreement with an internal or external entity; and Commercially leased facility.

Regardless of the type of alternate site chosen, the facility must be able to support system operations as defined in the contingency plan. The three alternate site types commonly categorized in terms of their operational readiness are cold sites, warm sites, or hot sites. Other variations or combinations of these can be found, but generally all variations retain similar core features found in one of these three site types.

Progressing from basic to advanced, the sites are described below:

Cold Sites are typically facilities with adequate space and infrastructure (electric power, telecommunications connections, and environmental controls) to support information system recovery activities. ƒWarm Sites are partially equipped office spaces that contain some or all of the system hardware, software, telecommunications, and power sources.

Hot Sites are facilities appropriately sized to support system requirements and configured with the necessary system hardware, supporting infrastructure, and support personnel.

As discussed above, these three alternate site types are the most common. There are also variations, and hybrid mixtures of features from any one of the three. Each organization should evaluate its core requirements in order to establish the most effective solution.

Two examples of variations to the site types are:

ƒMobile Sites are self-contained, transportable shells custom-fitted with specific telecommunications and system equipment necessary to meet system requirements. ƒMirrored Sites are fully redundant facilities with automated real-time information mirroring. Mirrored sites are identical to the primary site in all technical respects.

There are obvious cost and ready-time differences among the options. In these examples, the mirrored site is the most expensive choice, but it ensures virtually 100 percent availability. Cold sites are the least expensive to maintain, although they may require substantial time to acquire and install necessary equipment. Partially equipped sites, such as warm sites, fall in the middle of the spectrum. In many cases, mobile sites may be delivered to the desired location within 24 hours, but the time necessary for equipment installation and setup can increase this response time. The selection of fixed-site locations should account for the time and mode of transportation necessary to move personnel and/or equipment there. In addition, the fixed site should be in a geographic area that is unlikely to be negatively affected by the same hazard as the organization’s primary site.

The following reference(s) were used for this question:

http://csrc.nist.gov/publications/nistpubs/800-34-rev1/sp800-34-rev1_errata-Nov11-2010.pdf

Question 16 (Access Control)

What is the Biba security model concerned with?

Select an option, then click Submit answer.

○
Confidentiality
○
Reliability
○
Availability
○
Integrity

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 17 (Security Operation Adimnistration)

External consistency ensures that the data stored in the database is:

Select an option, then click Submit answer.

○
in-consistent with the real world.
○
remains consistant when sent from one system to another.
○
consistent with the logical world.
○
consistent with the real world.

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 18 (Access Control)

What is called an automated means of identifying or authenticating the identity of a living person based on physiological or behavioral characteristics?

Select an option, then click Submit answer.

○
Biometrics
○
Micrometrics
○
Macrometrics
○
MicroBiometrics

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 19 (Cryptography)

What can be defined as secret communications where the very existence of the message is hidden?

Select an option, then click Submit answer.

○
Clustering
○
Steganography
○
Cryptology
○
Vernam cipher

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 20 (Security Operation Adimnistration)

What is the goal of the Maintenance phase in a common development process of a security policy?

Select an option, then click Submit answer.

○
to review the document on the specified review date
○
publication within the organization
○
to write a proposal to management that states the objectives of the policy
○
to present the document to an approving body
○
& KRAUSE, MICKI, Information Security Management Handbook, 4th Edition, Volume 3, 2002, Auerbach Publications.
Also: KRUTZ, Ronald L. & VINES, Russel D., The CISSP Prep Guide: Mastering the Ten Domains of Computer Security, John Wiley & Sons, 2001, Chapter 8: Business Continuity Planning and Disaster Recovery Planning (page 286).

Ask AI for More Explanation

— your own AI account, opens inside the app

About the SSCP Free Practice Test

This free practice test covers the Systems Security Certified Practitioner (SSCP) exam from ISC2. The 20 questions are a free sample of the full Study4Pass practice set of 1074 questions, so you can check your level before you commit to the real exam. The free sample is made up of 20 single-answer questions, each with a full explanation. Questions are spread across the areas that matter most on the real exam: Access Control, Network and Telecommunications, Risk, Response and Recovery and Security Operation Adimnistration. ISC SSCP (Systems Security Certified Practitioner) is an internationally-recognized cybersecurity certification that tests a candidate's knowledge and skills in the areas of system security, risk management, incident response, access control, encryption and more.

The target audience for the ISC SSCP Exam is IT professionals who are looking to demonstrate their knowledge and skills in the areas of system and network security. The prerequisite for ISC SSCP Exam is that the candidate must have a minimum of one year of experience in the information security field.

Certification: Systems Security Certified Practitioner (SSCP)
Vendor: ISC2
Free on this page: 20 practice questions with answers and explanations
Full practice set: 1074 questions

Treat this sample as a diagnostic. Answer honestly, check the explanation after every question, and note which topics feel shaky. A short, focused review of those topics is worth more than re-reading everything — and the full set lets you drill them topic by topic.

A good way to use this page: take the whole sample in one sitting, then go back over every explanation with fresh eyes. Mark the topics that felt uncertain, not just the ones you got wrong — uncertain answers are unmarked risk on the real exam. One or two focused passes like this usually move a score more than days of passive reading.

Inside the full SSCP practice set:

All 1074 questions with answers and explanations
Timed Exam Simulation that mirrors the real exam pressure
Topic Training to drill one domain at a time
Ask AI for More Explanation on every question
Flag questions and review them before you finish

How to use this SSCP free practice test

Answer a question, then check the result to see the correct answer and the explanation behind it. Work at your own pace — there is no timer and no signup. Stuck on a concept? This is an AI-Enabled practice test: use Ask AI on any question and get the underlying concept explained in plain words, so you learn the reasoning instead of memorizing answers. Ready for more? The full 1074-question set adds a timed Exam Simulation mode, topic training for your weak areas, and a flagged-question review, so you can practise the way the real exam feels.

What to study for each SSCP topic

Access Control — about 23% of this practice set — Work through the Access Control questions until the reasoning behind each answer is clear — guessing your way past this area will show up on exam day.
Network and Telecommunications — about 23% of this practice set — Use the practice questions to find your gaps in Network and Telecommunications first, then read the official ISC2 documentation for anything you missed.
Risk, Response and Recovery — about 17% of this practice set — For Risk, Response and Recovery, focus on understanding why each correct answer is right; the real exam rewards reasoning over recall.
Security Operation Adimnistration — about 16% of this practice set — Drill Security Operation Adimnistration with the questions above, and revisit any explanation that surprises you — surprises are exactly what to fix before the exam.
Cryptography — about 14% of this practice set — Work through the Cryptography questions until the reasoning behind each answer is clear — guessing your way past this area will show up on exam day.
Analysis and Monitoring — about 6% of this practice set — Use the practice questions to find your gaps in Analysis and Monitoring first, then read the official ISC2 documentation for anything you missed.
Malicious Code — about 1% of this practice set — For Malicious Code, focus on understanding why each correct answer is right; the real exam rewards reasoning over recall.

SSCP practice test — quick questions

Is this SSCP practice test free?

Yes — the 20 questions on this page are completely free, with no signup and no payment details needed.

How many questions are in the full SSCP set?

1074 questions. The 20 free questions above are a sample of that full set, in the same style and topic balance.

Does the free test show the answers?

Yes — every question shows the correct answer with an explanation, and Ask AI can explain the concept behind a question in plain words if you want to go deeper.