P1 Residential Plumbing Inspector โ Exam Overview
Quick Facts
P1 - Residential Plumbing Inspector - is an International Code Council (ICC) National certification examination. Per ICC's content outline (p1_content.pdf), the exam has "60 multiple-choice questions", a "2-hour limit" and is "Open book" (exact wording as printed in the outline). Its outline has 6 domains: General Requirements (14%); Fixtures (8%); Water Heaters (12%); Water Supply and Distribution (21%); Sanitary Drainage (23%); Vents (22%). This Study4Pass practice bank contains 80 original practice questions aligned to that outline.
Who this exam is for
Residential plumbing inspectors - and candidates preparing for ICC's P1 certification - who inspect dwelling fixtures, water heaters, water supply and distribution, sanitary drainage and vent systems.
Exam Domains
General Requirements โ 14%
Domain 01 of ICC's content outline for the P1 examination (p1_content.pdf), covering permits, protection of piping systems from corrosion, stress and strain, freezing and physical damage, piping installation with support, sleeving and penetrations, building component damage from plumbing installation, and required testing of installed piping systems.
Fixtures โ 8%
Domain 02 of ICC's content outline for the P1 examination, covering locations and minimum required fixtures, approved materials and fixture approvals, installation of fixtures with clearances, access and sealing, maximum and minimum flow rates and temperature control valves, and faucets, fixture fittings and accessories.
Water Heaters โ 12%
Domain 03 of ICC's content outline for the P1 examination, covering proper materials and appliance approval, clearances, locations, protection, pans and seismic restraint, required valving with T&P valve and discharge piping and thermal expansion, and fuel gas piping sizing, combustion air and venting.
Water Supply and Distribution โ 21%
Domain 04 of ICC's content outline for the P1 examination, covering approved materials, joints and connections; service and distribution piping for cold and hot water delivery with identification, sizing and valving; protection of the potable supply against contamination; minimum and maximum pressure and volume; and potable water and water treatment requirements.
Sanitary Drainage โ 23%
The largest domain of ICC's content outline for the P1 examination, covering approved materials, fittings, joints and connections; sizing and installation of the building drain, building sewer, branches and stacks; backwater valves, sumps, ejectors and cleanouts; traps by type, size, design, location and installation; and indirect waste systems with air breaks or air gaps.
Vents โ 22%
Domain 06 of ICC's content outline for the P1 examination, covering approved vent materials, joints, connections and proper grades, proper sizing of the venting system, and the minimum venting requirements, methods and installation.
Preparing for P1
Work through the practice questions in study mode first, read every explanation, then switch to timed practice. Weight your revision by the domain weightings above and revisit the topics you score lowest on until your practice scores are consistent.
Write Your Review on RESIDENTIAL-PLUMBING-INSPECTOR-P1 Residential Plumbing Inspector
RESIDENTIAL-PLUMBING-INSPECTOR-P1 Customer Reviews
No reviews yet
Be the first to share your experience with this exam.