Loading demo links...
What to study for each R3 domain
Administrative
Domain 01 of ICC's content outline for the R3 examination (r3_content.pdf), covering whether a permit is required and whether the submittal is complete and within the scope of the One and Two Family Dwelling Code, and correspondence with the applicant, including deficiency notices and marking the official approved sets of drawings after approval.
Key skills
Permits; Correspondence
Site
Domain 02 of ICC's content outline for the R3 examination, covering site plan compliance with local ordinances, fire separation, fire access, flood-hazard areas, setbacks and easements, wetlands and rights of way, and final grade sloping away from the footing or foundation wall without adversely affecting neighbouring property.
Key skills
Site Plan; Final Grade
Architectural and Life Safety
Domain 03 of ICC's content outline for the R3 examination, covering room sizes, ceiling heights, heat, light and ventilation; means of egress widths, stairs, guards and rails; fire protection through rated walls, draftstopping, smoke detectors and sprinklers; glazing and foam plastic safety; exterior veneers, weather-resistant barriers and sheathing; and specialty structures such as pools, spas and fireplaces.
Key skills
Room Sizes; Means of Egress; Fire Protection; Glazing; Exterior; Specialty
Structural
Domain 04 of ICC's content outline for the R3 examination, covering design loads; footings at correct depth and size below the frost line with footing drains and adequate soil bearing; foundation walls, anchorage, dampproofing and waterproofing; structural elements and load path continuity; lateral bracing for wind and seismic loads; flood-zone wall design; and pre-manufactured construction used in accordance with its listing.
Key skills
Design Loads; Footings; Foundation Walls; Structural Elements; Lateral Bracing; Construction Design; Pre-manufactured Construction
Energy Efficiency
Domain 05 of ICC's content outline for the R3 examination, covering verification that energy saving provisions for the building envelope, mechanical equipment and appliances comply with the code and are indicated on the plans.
Key skills
Energy (building envelope, mechanical equipment and appliances)
Mechanical
Domain 06 of ICC's content outline for the R3 examination, covering mechanical equipment protection, support, space and clearances; room volume for combustion air; venting and venting termination; fuel gas pipe sizes; and special fuel-burning systems such as open-flame grills, pool and sauna heaters, hydronic systems and decorative appliances.
Key skills
Mechanical Equipment and Appliances; Room Volume; Venting and Venting Termination; Fuel Gas Pipe Sizes; Fuel-Burning Equipment
Plumbing
Domain 07 of ICC's content outline for the R3 examination, covering minimum required fixtures with correct clearances, piping clearances and support, a potable water system that is provided and protected, and a sanitary disposal system that is provided and protected.
Key skills
Fixtures; Clearances and Support; Potable Water System; Sanitary Disposal
Electrical
Domain 08 of ICC's content outline for the R3 examination, covering the load calculation and adequacy of the service, required circuits and disconnects, the grounding and grounding electrode system, outlets, switches, luminaires and receptacles including GFCI and AFCI protection, electrical panel location and working space, bonding, and conductor and conduit sizing and support.
Key skills
Load Calculation; Circuits and Disconnects; Grounding and Grounding Electrode Systems; Outlets, Switches, Luminaires and Receptacles; Electrical Panel; Bonding; Conductor and Conduit Size and Support