M2 Commercial Mechanical Inspector โ Exam Overview
Quick Facts
M2 โ Commercial Mechanical Inspector โ is an International Code Council (ICC) National certification examination. Per ICC's content outline (m2_content.pdf), the exam has 50 multiple-choice questions with a 2-hour limit and is "Open book" (exact wording as printed). Its outline domains are: General Administration (15%); Heating/Cooling/Water Heaters (15%); Exhaust and Ventilation Systems (20%); Duct Systems (12%); Combustion Air (14%); Chimneys and Vents (14%); Fuel Supply Systems (10%). This Study4Pass practice bank contains 80 original practice questions aligned to that outline.
Who this exam is for
Commercial mechanical inspectors and combination inspectors preparing for ICC's M2 Commercial Mechanical Inspector certification, who inspect heating, cooling, exhaust, duct, combustion-air, venting and fuel-gas work in commercial buildings.
Exam Domains
General Administration โ 15%
Domain 01 of ICC's content outline for the M2 Commercial Mechanical Inspector examination (m2_content.pdf), covering project administration and permits, public information and legal duties, plan reading against approved documents, and following manufacturers' installation instructions and listings.
Heating/Cooling/Water Heaters โ 15%
Domain 02 of ICC's content outline for the M2 examination, covering heating equipment, water heaters and boilers, cooling and refrigeration systems (including refrigerant class, piping, controls and machinery-room safety), and special fuel-burning systems such as pool heaters and crematories. The source prints the first two items of this domain both as 0202; the duplication is the owner's, transcribed as printed in the capture.
Exhaust and Ventilation Systems โ 20%
Domain 03 of ICC's content outline for the M2 examination, covering ventilation and environmental exhaust, commercial kitchen hoods and grease exhaust, hazardous-vapour and emergency (smoke-control) exhaust, and product-conveying ventilation for dusts and conveyed materials.
Duct Systems โ 12%
Domain 04 of ICC's content outline for the M2 examination, covering duct construction materials, support and insulation, the permitted uses of ducts and plenums (including sizing of supply and return), and fire, smoke, volume and balancing dampers.
Combustion Air โ 14%
Domain 05 of ICC's content outline for the M2 examination โ a single-item domain (0501 Combustion Air, 14%) covering sources of air for fuel-burning appliances, the size and location of combustion-air openings, and the materials and installation of combustion-air ducts.
Chimneys and Vents โ 14%
Domain 06 of ICC's content outline for the M2 examination, covering venting of fuel-burning appliances (size, type, location, clearances, connections and terminations) and chimney and vent connectors.
Fuel Supply Systems โ 10%
Domain 07 of ICC's content outline for the M2 examination, covering fuel-gas piping installation and sizing (materials, supports and tightness testing) and fuel-system connections (fittings, valves and material transitions).
Preparing for M2
Work through the practice questions in study mode first, read every explanation, then switch to timed practice. Weight your revision by the domain weightings above and revisit the topics you score lowest on until your practice scores are consistent.
Write Your Review on M2 Commercial Mechanical Inspector
M2 Customer Reviews
No reviews yet
Be the first to share your experience with this exam.