HPE6-A89 HPE Networking Comware — Exam Overview
Quick Facts
The HPE Networking Comware exam (HPE6-A89) is a proctored exam of 50 questions in 1 hour 30 minutes with a passing score of 70%, delivered through the HPE credential management platform. HPE publishes 13 objective sections for this exam with no percentage weightings, so this Study4Pass practice bank of 80 original questions splits them near-equally across all 13 sections. No exam fee is published in the HPE Exam Preparation Guide, so no fee is stated here.
Exam Domains
Articulate Basic Comware Setup
Covers the Comware CLI view hierarchy, display commands, the undo command form, and saving the running configuration to the startup configuration so changes survive a reboot.
Describe Protecting Management Access
Covers securing administrative access to Comware devices: SSH instead of plaintext Telnet, AAA with RADIUS or HWTACACS, ACLs applied to VTY user interfaces, and local users with service types and roles.
Describe Management Software and Configuration
Covers startup configuration file management and backup, system software images and the boot loader, HPE Intelligent Management Center (IMC) for central management, and SNMP management access.
Describe VLANs
Covers Comware port link types - access, trunk and hybrid - with their tagging behaviour and PVID, plus Vlan-interfaces that give a VLAN its Layer 3 gateway for inter-VLAN routing.
Describe IP Services
Covers the IP services a Comware switch provides: DHCP server address pools, DHCP relay to a central server, NTP time synchronisation, and ARP including static entries and the ARP table.
Describe Spanning Tree Protocol
Covers MSTP with regions, instances and VLAN mappings, root bridge election and deliberate root placement, edge ports, and BPDU protection on access ports.
Describe IP Routing
Covers static routes with ip route-static, route preference values and how competing sources are ranked, reading the IP routing table, and floating static routes for backup paths.
Describe IRF
Covers Intelligent Resilient Framework: virtualising several Comware switches into one logical device, master election by priority, IRF ports and stacking links, and Multi-Active Detection against split fabrics.
Describe Access Control Lists
Covers the Comware ACL families by number range - basic (2000-2999), advanced (3000-3999) and Layer 2 (4000-4999) - and enforcing them with packet-filter on interfaces.
Describe Quality of Service
Covers the Comware QoS model end to end: traffic classifiers that select packets, traffic behaviors that treat them, QoS policies that bind the two and are applied to interfaces, and queuing disciplines such as SP, WRR and WFQ.
Describe OSPF Multi-Area
Covers multi-area OSPF design: the area 0 backbone and ABRs, virtual links through transit areas, stub and NSSA area types, and reading LSA types 1, 2, 3 and 5 in the link-state database.
Describe BGP
Covers eBGP and iBGP, best-path selection with LOCAL_PREF, AS_PATH and MED, route reflectors that replace the iBGP full mesh, and route-policy filtering and attribute control on Comware.
Describe Multicast
Covers IP multicast delivery on Comware: PIM Dense Mode flood-and-prune, PIM Sparse Mode with a rendezvous point and shared/source trees, IGMP membership on the last hop, and RP placement and learning.
Preparing for HPE6-A89
Work through the practice questions in study mode first, read every explanation, then switch to timed practice. Weight your revision by the domain weightings above and revisit the topics you score lowest on until your practice scores are consistent.
Write Your Review on HPE6-A89 HPE Networking Comware
HPE6-A89 Customer Reviews
No reviews yet
Be the first to share your experience with this exam.