Loading demo links...
Showing 1–10 of 10 questions
HOTSPOT
A network administrator wants to receive a major alarm every time a controller or an Aruba switch goes down for either a local or an upstream device failure. Which alarm definition must the network administrator create to accomplish this?
Hot Area:
Answer is in the explanation below.
A network administrator has updated the ArubaOS code of a standalone Mobility Controller (MC) that is used for User-Based Tunneling (UBT) to a newer early release. Ever since the MC seems to reject PAPI sessions from the switch with the 10.1.10.10 IP address. Also the controller’s prompt is now followed by a star mark: “(MC_VA) [mynode] *#”
When opening a support ticket, an Aruba TAC engineer asks the administrator to gather the crash logs and if possible replicate UBT connection attempts from the switch while running packet captures of PAPI traffic on the controller and obtain the PCAP files. The administrator has a PC with Wireshark and TFTP server using the 10.0.20.20 IP address.
What commands must the administrator issue to accomplish these requests? (Choose two.)
Select all that apply, then click Submit answer.
Option A
Option B
Option C
Option D
Option E
An organization owns a fully functional multi-controller Aruba network with a Virtual Mobility Master (VMM) in VLAN20. They have asked a network consultant to deploy a redundant MM on a different server. The solution must offer the lowest convergence time and require no human interaction in case of failure.
The servers host other virtual machines and are connected to different switches that implement ACLs to protect them. The organization grants the network consultant access to the servers only, and appoints a network administrator to assist with the deployment.
What must the network administrator do so the network consultant can successfully deploy the solution? (Choose two.)
Select all that apply, then click Submit answer.
Allocate VLAN20 to the second server, and extend it throughout the switches, then reserve one IP address for the second MM and another IP address for its gateway.
Allocate VLAN20 to the second server, and permit routing between them, then reserve one IP address for the second MM and another IP address for its gateway.
Configure an ACL entry that permits IP protocol 50, UDP port 500, and multicast IP 224.0.0.18.
Allocate VLAN20 to the second server, and extend it throughout the switches, then reserve one IP address for the second MM and another for the VIP.
Configure an ACL entry that permits UDP 500, TCP 4500, and multicast IP 224.0.0.5.
A network administrator is in charge of a Mobility Master (MM) – Mobility Controller (MC) based WLAN. The administrator has deployed an Airwave Management Platform (AMP) server in order to improve the monitoring capabilities and generate reports and alerts.
The administrator has configured SNMPv3 and Admin credentials on both the MMs and MCs and has created Groups and Folders in the AMP server. What two additional steps must the administrator do in order to let Airwave monitor the network devices? (Choose two.)
Select all that apply, then click Submit answer.
Manually add the Active MM and wait for automatic Discovery.
Map the AMP’s IP address with a mgmt-config profile in the MM.
Set the AMP’s IP address and Org string as DHCP option 43.
Manually add each MM, MC and Access Point in the AMP server.
Move “New” devices into a group and folder in Airwave.
Refer to the exhibit.
A 7008 Branch Office Controller (BOC) is deployed in a remote office behind a core router. This core does not support 802.1q encapsulation. The Mobility Controller (MC) is the gateway for two tunneling mode SSIDs, as shown in the exhibit.
Which two different configuration options ensure that wireless users are able to reach the branch network through the router? (Choose two.)
Select all that apply, then click Submit answer.
Configure all ports of the BOC as access ports on the controller VLAN, and change the gateway of clients to the core router IP.
Configure the uplink of the BOC as an access port on the controller VLAN, and add static routes in the router for the SSID VLAN subnets.
Configure the uplink of the BOC as a trunk port that permits the controller and the SSID VLANs. The controller VLAN must be native.
Configure the uplink of the BOC as an access port on the controller VLAN, and enable NAT for the SSID VLANs.
Configure the uplink of the BOC as a trunk port, tagging the controller and the SSOD VLANs, and enable NAT for the SSID VLANs.
A company with 535 users deploys an Aruba solution with more than 1000 Aruba APs, two 7220 Mobility Controllers, and a single Mobility Master (MM) virtual appliance at the campus server farm. The MCs run a HA Fast failover group in dual mode and operate at 50% AP capacity.
If there is an MM or MC failure, the network administrator must ensure that the network is fully manageable and the MC load does not exceed 80%.
What can the network administrator do to meet these requirements?
Select an option, then click Submit answer.
Place the APs in the same hierarchy level.
Create a cluster with AP load balancing.
Enable oversubscription in the HA group.
Add an MC and an MM in the server farm.
Add an MM and enable DC redundancy.
Place the APs in two different AP-Groups.
An organization wants to deploy a WLAN infrastructure that provides connectivity to these client categories:
• Employees
• Contractors
• Guest users
• Corporate IoT legacy devices that support no authentication or encryption
Employees and contractors must authenticate with company credentials and get network access based on AD group membership. Guest users are required to authenticate with captive portal using predefined credentials. Only employees will run L2 encryption.
Which implementation plan fulfills the requirements while maximizing the channel usage?
Select an option, then click Submit answer.
Create VAP1 to run WPA2-AES and 802.1x authentication, VAP2 to run opensystem encryption with MAC authentication, and VAP3 to run opensystem with captive portal and L2 fail through.
Create a single VAP to run WPA2-AES and 802.1x authentication, MAC authentication L2 fail through, captive portal, and VIA support.
Create VAP1 to run WPA2-AES and 802.1x authentication, VAP2 to run opensystem encryption with MAC authentication, and VAP3 to run opensystem with captive portal.
Create VAP1 to run WPA2-AES and 802.1x authentication, and VAP2 to run opensystem encryption with MAC authentication and captive portal.
Refer to the exhibit.
The network administrator must ensure that the configuration will force users to authenticate periodically every eight hours. Which configuration is required to effect this change?
Select an option, then click Submit answer.
Set the reauth-period to 28800 enable reauthentication in the dot1x profile.
Set the reauth-period to 28800 enable reauthentication in the AAA profile.
Set the reauth-period to 28800 enable reauthentication in both dot1x and AAA profile.
Set the reauth-period to 28800 in the dot1x profile and enable reauthentication in the AAA profile.
Users run encrypted Skype for Business traffic with no WMM support over an Aruba Mobility Master (MM) - Mobility Controller (MC) based network. When voice, video, and application sharing traffic arrive at the wired side of the network, all the flows look alike due to the lack of L2 and L3 markings
How can the network administrator identify these flows and mark QoS accordingly?
Select an option, then click Submit answer.
Confirm the MC is the Openflow controller of the MMs and Openflow is enabled in VAP and the firewall roles. Then enable WMM in a VAP profile.
Use a media firewall policy that match these three flows, and use permit and TOS actions with 56, 40, and 34 values for voice, video, and application sharing, respectively. Then enable the Skype4Business ALG in the UCC profiles.
Confirm the MC is the Openflow controller of the MMs and Openflow is enabled in VAP and the firewall roles. Then enable the Skype4Business ALG in the UCC profiles.
Confirm the MM is the Openflow controller of the MCs and Openflow is enabled in VAP and the firewall roles. Then integrate the MM with the Skype4Business SDN API, and enable the Skype4Business ALG in the UCC profiles.
A network administrator has racked up a 7210 Mobility Controller (MC) that will be terminating 200+ Aps on a medium-size branch office. Next, the technician cabled the appliance with 4SPF+ Direct Attached Cables (DACs) distributed between two-member switching stack and powered it up.
What must the administrator do next in the MCs to assure maximum wired bandwidth utilization?
Select an option, then click Submit answer.
Map the four physical ports to port channel 0.
Disable spanning tree and allocate unique VLANs to each port.
Manually set 10Gbps speeds on all ports.
Configure the same MSTP region that the switches have.
Make all ports trunk interfaces and permit data VLANs.
This page holds a free practice test for the Aruba Certified Mobility Expert Written (HPE6-A79) certification from HP. The 10 questions are a free sample of the full Study4Pass practice set of 55 questions, so you can check your level before you commit to the real exam. The free sample includes 5 single-answer, 4 multiple-answer and 1 interactive questions — the same mix of formats you will meet in the full set. Questions are spread across the areas that matter most on the real exam: Aruba Mobility Architecture, Aruba Mobility Design and Aruba Mobility Configuration and Management. The HPE6-A79 exam is an HPE Enterprise Aruba Certified Mobility Professional 8 exam.
The primary target audience of the HP HPE6-A79 exam is IT professionals who are looking to earn the HPE Aruba Certified Mobility Professional (HPE6-A79) certification. The HPE6-A79 exam is designed for individuals who have a minimum of one year of experience in designing, deploying, and managing Aruba wired and wireless networks, as well as experience…
Treat this sample as a diagnostic. Answer honestly, check the explanation after every question, and note which topics feel shaky. A short, focused review of those topics is worth more than re-reading everything — and the full set lets you drill them topic by topic.
A good way to use this page: take the whole sample in one sitting, then go back over every explanation with fresh eyes. Mark the topics that felt uncertain, not just the ones you got wrong — uncertain answers are unmarked risk on the real exam. One or two focused passes like this usually move a score more than days of passive reading.
Inside the full HPE6-A79 practice set:
Answer a question, then check the result to see the correct answer and the explanation behind it. Work at your own pace — there is no timer and no signup. Stuck on a concept? This is an AI-Enabled practice test: use Ask AI on any question and get the underlying concept explained in plain words, so you learn the reasoning instead of memorizing answers. Ready for more? The full 55-question set adds a timed Exam Simulation mode, topic training for your weak areas, and a flagged-question review, so you can practise the way the real exam feels.
Yes — the 10 questions on this page are completely free, with no signup and no payment details needed.
55 questions. The 10 free questions above are a sample of that full set, in the same style and topic balance.
Yes — every question shows the correct answer with an explanation, and Ask AI can explain the concept behind a question in plain words if you want to go deeper.
No. This is a practice test: the questions are written to mirror the real HPE6-A79 exam’s topics and difficulty, not copied from it.
