Free HPE6-A75 – Aruba Certified Edge Professional Exam Practice Test Question

Select all that apply, then click Submit answer.

• ○

  The Endpoint Profiler uses DHCP fingerprinting for device categorization.

• ○

  Data obtained from the Endpoint Profiler can be used in Enforcement Policy.

• ○

  Endpoint Profiler requires a profiling license.

• ○

  The Endpoint Profiler requires the Onboard license to be enabled.

• ○

  The Endpoint Profiler can only categorize laptops and desktops.
  
  
  

Select all that apply, then click Submit answer.

• ○

  They will connect to Employee_Secure SSID after provisioning.

• ○

  They will connect to Employee_Secure SSID for provisioning their devices.

• ○

  They will use WPA2-PSK with AES when connecting to the SSID.

• ○

  They will connect to secure_emp SSID after provisioning.

• ○

  They will perform 802.1X authentication when connecting to the SSID.
  
  
  

Select all that apply, then click Submit answer.

• ○

  The NAD should be configured with the primary node IP address for RADIUS authentication on the 802.1x network.

• ○

  A new Virtual IP address should be created for each NAD.

• ○

  Both the primary and secondary nodes will respond to authentication requests sent to the Virtual IP address when the primary node is active.

• ○

  The primary node will respond to authentication requests sent to the Virtual IP address when the primary node is active.

• ○

  The NAD should be configured with the Virtual IP address for RADIUS authentications on the 802.1x network.
  
  
  

Select all that apply, then click Submit answer.

• ○

  Enforcement Policy

• ○

  Posture token derivation

• ○

  Role Mapping

• ○

  Endpoint Profiler

• ○

  Chained simulation

Select all that apply, then click Submit answer.

• ○

  GRE

• ○

  SSL

• ○

  PAPI

• ○

  IPSec
  
  
  

Select an option, then click Submit answer.

• ○

  The AP is configured to terminate on a non-cluster Mobility Controller.

• ○

  The AP is configured as a RAP to terminate on a stand-alone controller.

• ○

  The AP is configured as a RAP to terminate on a Mobility Master.

• ○

  The AP is configured to terminate on a Mobility Controller in a cluster.
  
  
  

Select an option, then click Submit answer.

• ○

  A1 towards traffic, and A2 blocks traffic.

• ○

  Both Al and A2 block traffic.

• ○

  A1 blocks traffic, and A2 forwards traffic.

• ○

  Both A1 and A2 forward traffic
  
  
  

Select an option, then click Submit answer.

• ○

  Configure the same AP Groups and VAPs on the standalone controller, and associate the MultiZone APs to both groups.

• ○

  Configure the same AP Group in the data zone as it is in the primary zone, and configure the VAPs in the data zone.

• ○

  Have the MultiZone APs initially boot from the standalone controller in the data zone.

• ○

  Create different AP groups and VAPs on the Mobility Master and standalone controllers, and associate the MultiZone APs to both groups.
  
  
  

Select an option, then click Submit answer.

• ○

  RAP VPN username and password

• ○

  WLAN and new RAP group

• ○

  RAP IPSec pre-shared key

• ○

  RAP whitelist
  
  
  

Select an option, then click Submit answer.

• ○

  Access the Network Device view on ClearPass.

• ○

  Use the configuration audit tool on AirWave.

• ○

  View the current running config on each switch.

• ○

  View usage patterns on the switches on AirWave.