Free HH0-250 – Hitachi Data Systems Implementer File Services-NAS Practice Test Question

Select all that apply, then click Submit answer.

• ○

  The firmware version must be compatible across all nodes and the System Management Unit (SMU).

• ○

  All nodes must be preconfigured for the same cluster before delivery.

• ○

  The Hitachi NAS Platform family and model types must be compatible inside the cluster.

• ○

  The nodes and the SMU must be installed in the same physical rack.
  
  
  

Select all that apply, then click Submit answer.

• ○

  Link Aggregation Control Protocol (LACP)

• ○

  Spanning Tree Protocol (802.1d)

• ○

  Cisco Port Aggregation Protocol (PAgP)

• ○

  Cisco Etherchannel
  
  
  

Select all that apply, then click Submit answer.

• ○

  The Hitachi NAS Platform 3200 can have up to eight initiator host ports enabled.

• ○

  Initiator host ports are automatically enabled when connected to a Fibre Channel cable. C. Enabling an initiator host port requires a factory password and requires a SIM memory upgrade.

• ○

  All Hitachi NAS Platform models, except the 3200, can have up to four initiator host ports enabled.
  
  
  

Select all that apply, then click Submit answer.

• ○

  Verify that the Fibre Channel port speeds on the Hitachi NAS Platform nodes are set to the same speed as the ports on the Fibre Channel switches.

• ○

  Verify that the Hitachi Data Systems storage license has been installed.

• ○

  Verify that the SMU software version supports the Hitachi Data Systems storage system model.

• ○

  Verify that the Storage Area Network (SAN) zoning is correct.

• ○

  Verify that the correct Fiber Channel ports on the Hitachi NAS Platform nodes are enabled.
  
  
  

Select all that apply, then click Submit answer.

• ○

  Power off all nodes in the cluster.

• ○

  Disable the cluster interconnect interfaces.

• ○

  Ensure all EVSs are migrated from the faulty node.

• ○

  Make sure all anti-static precautions are fulfilled.

• ○

  Power off the node containing the faulty FSB before replacement.
  
  
  

Select an option, then click Submit answer.

• ○

  arcmv

• ○

  robocopy

• ○

  rsync

• ○

  mv
  
  
  

Select an option, then click Submit answer.

• ○

  ShadowImage

• ○

  TrueCopy

• ○

  TrueCopy Asynchronous

• ○

  Universal Replicator
  
  
  

Select an option, then click Submit answer.

• ○

  Modify the Intelligent Data Replication (IDR) rule and policy to include additional storage.

• ○

  Add storage pools created from the additional storage to the Incremental Block Replication (IBR) rule.

• ○

  Include system drive IDs created from the additional storage in the metro.conf file.

• ○

  Modify the HORCM configuration files to include the new P-Vols and S-Vols.
  
  
  

Select an option, then click Submit answer.

• ○

  Boot up the node and try to manage the node using the System Management Unit (SMU).

• ○

  Load the configuration from another customer and use a USB stick to import the configuration.

• ○

  Interrupt the boot sequence at the second stage loader, delete the configuration and then configure the node.

• ○

  Request that the node is preconfigured from the distribution center and ready to use.
  
  
  

Select an option, then click Submit answer.

• ○

  Replace the cable and reboot the node.

• ○

  Replace the cable and change the zone configuration in the FC switch.

• ○

  Replace the cable and check the status of the host ports with the CLI or GUI.

• ○

  Replace the cable and enable the port on the FC switch and the Hitachi NAS Platform node.