GB0-601 Configuring and managing H3C rack-mounted servers โ Exam Overview
Quick Facts
GB0-601 Configuring and managing H3C rack-mounted servers V1.0 is the exam for the H3CNE-Server (H3C Certified Network Engineer for Server) credential. Per the owner syllabus it lasts 60 minutes, contains 50 single-/multi-choice questions, and is passed with 600 out of 1000 points; the certificate is valid for 3 years. Per the H3C programme page the exam is arranged by H3C (contact the local H3C office for venues and enrolment) and the syllabus asks participants to be trained or hold H3CNE-X86Server before registering. No exam fee is published by H3C for this exam, so none is stated here. H3C publishes no domain weightings, so this Study4Pass practice bank of 80 original questions splits near-equally (12, 12, 12, 11, 11, 11, 11) across the seven syllabus sections.
Exam Domains
Fundamentals of servers
Server foundations from the syllabus: an introduction to industrial standard servers; the hardware structure and technologies of servers (processors, ECC memory, storage devices and interfaces, redundant hot-swappable power and cooling); and the frequently used server operating systems (Windows Server, Linux such as RHEL, and the VMware ESXi hypervisor).
H3C rack-mounted servers
The H3C UniServer G3 server family and its series as listed in the syllabus: the UniServer 2000 server, the UniServer 4000 server, the UniServer 5000 server and the UniServer 6000 server, including how the series differ in positioning, scale and density and how the family shares one management platform.
Configuration management of H3C rack-mounted server BIOS and RAID card
Firmware configuration on UniServer G3: the POST of UniServer G3 servers; the BIOS of UniServer R2000 and 4000 G3 servers; the BIOS of UniServer R6000 G3 servers (per node in the high-density chassis); UEFI and Legacy boot modes; and RAID card configuration of UniServer G3 servers, including RAID levels, virtual drives and hot spares.
H3C rack-mounted server out-of-band management
Out-of-band management of UniServer G3 servers: the HDM overview; server management with the HDM web page, including health, power, remote console and virtual media; server management with IPMI tools; and server management with the Redfish interface, over the HDM controller's dedicated management port.
H3C Rack-mounted server OS installation
Operating-system installation on UniServer G3 servers: OS compatibility checking; installation of Windows Server 2012 R2; installation of Red Hat Enterprise Linux 7.2; installation of VMware ESXi 6.0; and installation of hardware drivers, including RAID preparation, boot-mode choice and installation through HDM virtual media.
H3C rack-mounted server firmware upgrade
Firmware upgrading on UniServer G3 servers by the four syllabus routes: upgrading server firmware using the HDM web page; upgrading using the CRUL script; upgrading PMC RAID card firmware using the arcconf tool; and upgrading LSI RAID card firmware using the StorCLI tool, with model identification, preparation and post-upgrade verification.
H3C rack-mounted servers management tools and error log collection
Fleet tooling and diagnostics from the syllabus: H3C rack-mounted server management software FIST for central deployment and management; management software REPO as the governed package repository; and H3C rack-mounted server error log collection, including the system event log, log analysis and escalation with a collected log package.
Preparing for GB0-601
Work through the practice questions in study mode first, read every explanation, then switch to timed practice. Weight your revision by the domain weightings above and revisit the topics you score lowest on until your practice scores are consistent.
Write Your Review on GB0-601 Configuring and managing H3C rack-mounted servers
GB0-601 Customer Reviews
No reviews yet
Be the first to share your experience with this exam.