Introduction of Fortinet NSE7-SDW-7-2 Exam!

The Fortinet NSE7-SDW-7-2 exam is part of the Fortinet NSE 7 - SD-WAN 7.2 certification. It validates the knowledge and skills described in the Fortinet NSE 7 - SD-WAN 7.2 syllabus published by Fortinet. Candidates prepare for this exam to prove their competency and advance their careers.

What is the Duration of Fortinet NSE7-SDW-7-2 Exam?

The duration of the Fortinet NSE7-SDW-7-2 exam is defined by Fortinet in the official exam guide for the Fortinet NSE 7 - SD-WAN 7.2 certification. Candidates should confirm the current duration on the official exam page before scheduling.

What is the Number of Questions Asked in Fortinet NSE7-SDW-7-2 Exam?

The number of questions on the Fortinet NSE7-SDW-7-2 exam is defined by Fortinet in the official exam guide. The Study4Pass practice test for this exam contains 70 practice questions with answers and explanations.

What is the Passing Score for Fortinet NSE7-SDW-7-2 Exam?

The passing score for the Fortinet NSE7-SDW-7-2 exam is set by Fortinet and published in the official exam guide for the Fortinet NSE 7 - SD-WAN 7.2 certification.

What is the Competency Level required for Fortinet NSE7-SDW-7-2 Exam?

The Fortinet NSE7-SDW-7-2 exam is an intermediate level exam. It is designed for candidates who have the knowledge and practical understanding expected at the associate level of the Fortinet certification program.

What is the Question Format of Fortinet NSE7-SDW-7-2 Exam?

The Fortinet NSE7-SDW-7-2 exam typically includes multiple choice and multiple response questions based on the topics in the official syllabus.

How Can You Take Fortinet NSE7-SDW-7-2 Exam?

You can register for the Fortinet NSE7-SDW-7-2 exam through the Fortinet certification website and take it at an authorized testing center or, where Fortinet offers it, as an online proctored exam.

What Language Fortinet NSE7-SDW-7-2 Exam is Offered?

The Fortinet NSE7-SDW-7-2 exam is offered in English. Fortinet may offer additional languages for this exam; the available languages are listed on the official exam page.

What is the Cost of Fortinet NSE7-SDW-7-2 Exam?

The cost of the Fortinet NSE7-SDW-7-2 exam is set by Fortinet and can vary by region. The current exam fee is published on the official Fortinet certification page for the Fortinet NSE 7 - SD-WAN 7.2 certification.

What is the Average Salary of Fortinet NSE7-SDW-7-2 Certified in the Market?

Salaries for Fortinet NSE7-SDW-7-2 certified professionals vary by role, experience, and region. Certified professionals generally earn competitive salaries in roles related to Fortinet NSE 7 - SD-WAN 7.2.

Who are the Testing Providers of Fortinet NSE7-SDW-7-2 Exam?

The testing provider of the Fortinet NSE7-SDW-7-2 exam is Pearson VUE, which delivers the exam on behalf of Fortinet.

What is the Recommended Experience for Fortinet NSE7-SDW-7-2 Exam?

For the Fortinet NSE7-SDW-7-2 exam, around 1 year of hands-on experience in the field is recommended. Candidates should also review the official syllabus and practice with sample questions before scheduling the exam.

What are the Prerequisites of Fortinet NSE7-SDW-7-2 Exam?

The prerequisites of the Fortinet NSE7-SDW-7-2 exam, if any, are defined by Fortinet in the official exam guide. Candidates should confirm the current requirements on the official certification page.

What is the Expected Retirement Date of Fortinet NSE7-SDW-7-2 Exam?

No retirement date for the Fortinet NSE7-SDW-7-2 exam has been announced by Fortinet; any retirement would be published on the official Fortinet certification pages.

What is the Difficulty Level of Fortinet NSE7-SDW-7-2 Exam?

The difficulty level of the Fortinet NSE7-SDW-7-2 exam is considered to be moderate. It is recommended to have a good understanding of the topics covered in the official syllabus.

What is the Roadmap / Track of Fortinet NSE7-SDW-7-2 Exam?

The Fortinet NSE7-SDW-7-2 exam belongs to the Fortinet NSE 7 - SD-WAN 7.2 track in the Fortinet certification program. Candidates can use it to progress within the Fortinet certification roadmap.

What are the Topics Fortinet NSE7-SDW-7-2 Exam Covers?

The Fortinet NSE7-SDW-7-2 exam covers the topics published by Fortinet in the official syllabus for Fortinet NSE 7 - SD-WAN 7.2. The Study4Pass practice questions for this exam are organized around those topics.

What are the Sample Questions of Fortinet NSE7-SDW-7-2 Exam?

You can try sample questions of the Fortinet NSE7-SDW-7-2 exam for free on Study4Pass. The free practice test on this page includes sample questions with answers and explanations from the full set of 70 practice questions.

← Back to exam page

Free NSE7-SDW-7-2 – Fortinet NSE7-SDW-7-2 Practice Test Question

Free demo downloads

Loading demo links...

Showing 1–7 of 7 questions

Question 1 (Topic 1)

Refer to the exhibit. The exhibit shows output of the command diagnose sys sdwan service collected on a FortiGate device. The administrator wants to know through which interface FortiGate will steer the traffic from local users on subnet 10.0.1.0/255.255.255.192 and with a destination of the business application Salesforce located on HQ servers 10.0.0.1. Based on the exhibits, which two statements are correct? (Choose two.)

Select an option, then click Submit answer.

○ There is no service defined for the Salesforce application, so FortiGate will use the service rule 3 and steer the traffic through interface T_HQ1.
○ FortiGate steers traffic to HQ servers according to service rule 1 and it uses port1 or port2 because both interfaces are selected.
○ When FortiGate cannot recognize the application of the flow it steers the traffic destined to server 10.0.0.1 according to service rule 3.
○ FortiGate steers traffic for business application according to service rule 2 and steers traffic through port2.

Ask AI for More Explanation

— your own AI account, opens inside the app

Reference / correct answer:

When FortiGate cannot recognize the application of the flow it steers the traffic destined to server 10.0.0.1 according to service rule 3.

Most accepted answer: C. When FortiGate cannot recognize the application of the flow it steers the traffic destined to server 10.0.0.1 according to service rule 3.

Community votes: A=4, C=13, D=10

C & D Salesforce = Business category -> D is correct C is a general rule upvoted 14 times theklee 1 year, 8 months ago Yes, Salesforce = business category, but the service sd-wan service 3 rule says "Internet Services" which are application specific. If they wanted to catch Salesforce as a business application, the rule should say Application Control instead of Internet Service. upvoted 1 times BoostBoris 1 year, 4 months ago Just tested on my FGT v7.2.10. When you configure SD-WAN rule with application "business" and "industrial", command diag sys sdwan service returns "Internet Service(2): Business(0,29,0,0,0) Industrial(0,26,0,0,0)" upvoted 1 times ... ...

Yes, Salesforce = business category, but the service sd-wan service 3 rule says "Internet Services" which are application specific. If they wanted to catch Salesforce as a business application, the rule should say Application Control instead of Internet Service. upvoted 1 times BoostBoris 1 year, 4 months ago Just tested on my FGT v7.2.10. When you configure SD-WAN rule with application "business" and "industrial", command diag sys sdwan service returns "Internet Service(2): Business(0,29,0,0,0) Industrial(0,26,0,0,0)" upvoted 1 times ...

Just tested on my FGT v7.2.10. When you configure SD-WAN rule with application "business" and "industrial", command diag sys sdwan service returns "Internet Service(2): Business(0,29,0,0,0) Industrial(0,26,0,0,0)" upvoted 1 times

Selected Answer: AC D is incorrect, the ISDB uses public IP addresses. The question is about "salesforce located on HQ Servers 1 Therefore A is correct because there is no definition for THEIR particular flavor of salesfore traffic. C is also correct. upvoted 3 times

Selected Answer: AC D is not correct because ISDBs are public IPs, not 10.0.0.1 upvoted 4 times

Question 2 (Topic 1)

Refer to the exhibits. Exhibit A. Exhibit B. An administrator is testing application steering in SD-WAN. Before generating test traffic, the administrator collected the information shown in exhibit A. After generating GoToMeeting test traffic, the administrator examined the respective traffic log on FortiAnalyzer, which is shown in exhibit B. The administrator noticed that the traffic matched the implicit SD-WAN rule, but they expected the traffic to match rule ID 1. Which two reasons explain why some log messages show that the traffic matched the implicit SD-WAN rule? (Choose two.)

Select an option, then click Submit answer.

○ Port1 and port2 do not have a valid route to the destination.
○ The session 3-tuple did not match any of the existing entries in the ISDB application cache.
○ Full SSL inspection is not enabled on the matching firewall policy.
○ FortiGate did not refresh the routing information on the session after the application was detected.

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 3 (Topic 1)

Refer to the exhibits. Exhibit A - Exhibit B - Exhibit A shows the SD-WAN performance SLA and exhibit B shows the SD-WAN member status, the routing table, and the performance SLA status. If port2 is detected dead by FortiGate, what is the expected behavior?

Select an option, then click Submit answer.

○ Host 8.3.8.8 is reachable through port1 and port2.
○ Port2 becomes alive after three successful probes are detected.
○ The administrator manually restores the static routes for port2, if port2 becomes alive.
○ FortiGate disables all static routes for port2.

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 4 (Topic 1)

Refer to the exhibit. The device exchanges routes using IBGP. Which two statements are correct about the IBGP configuration and routing information on the device? (Choose two.)

Select an option, then click Submit answer.

○ Each BGP route is three hops away from the destination.
○ ibgp-multipath is disabled.
○ You can run the get router info routing-table database command to display the additional paths.
○ additional-path is enabled.

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 5 (Topic 1)

Refer to the exhibits. Exhibit A - Exhibit B - Exhibit A shows an SD-WAN event log and exhibit B shows the member status and the SD-WAN rule configuration. Based on the exhibits, which two statements are correct? (Choose two.)

Select an option, then click Submit answer.

○ FortiGate updated the outgoing interface list on the rule so it prefers port2.
○ Port2 has the highest member priority.
○ SD-WAN rule ID 1 is set to lowest cost (SLA) mode.
○ Port2 has a lower latency than port.

Ask AI for More Explanation

— your own AI account, opens inside the app

Reference / correct answer:

FortiGate updated the outgoing interface list on the rule so it prefers port2.

Most accepted answer: A. FortiGate updated the outgoing interface list on the rule so it prefers port2.

Community votes: A=6, B=2, D=4

Selected Answer: AD sequence number sequence number and latency upvoted 1 times

Selected Answer: AD A & D are correct. A - from the log we see "Sequence Number: 2, 1" B - priority is for routes, thus the claim is not true D - from the log we "Others / Metric: latency" upvoted 3 times

Selected Answer: AB Remember the Priority configuration (port1 = 1 and port 2 = 10) is irrelevant here -- it only applies to traffic matching the implicit rule, not to SD-WAN member selection. Member sequence number is generally in order of configuration, however, In this case, the sequence has been modified by latency comparison between ports 1 and 2 based on the Best Quality SD-WAN strategy in use here. Thus B is correct. D looks like it could be correct if they completed the last word. This is a bad question. upvoted 4 times 0x194 1 year, 7 months ago I think it is A and D: A Correct -> Log: “Sequence number 2,1”. B Not correct -> I assume this refers to “set priority-members 1 2”. Therefore Port1 has the better priority. C Not correct -> Best quality. D Correct -> Presumably this should mean Port1 at the end, which then corresponds to answer A. upvoted 1 times ...

I think it is A and D: A Correct -> Log: “Sequence number 2,1”. B Not correct -> I assume this refers to “set priority-members 1 2”. Therefore Port1 has the better priority. C Not correct -> Best quality. D Correct -> Presumably this should mean Port1 at the end, which then corresponds to answer A. upvoted 1 times

Selected Answer: AD A. From the log -> Sequence Number D. From the log -> Sequence Number and Metric upvoted 4 times

Question 6 (Topic 1)

Refer to the exhibit. The administrator used the SD-WAN overlay template to prepare an IPsec tunnels configuration for a hub-and-spoke SD-WAN topology. The exhibit shows the FortiManager installation preview for one FortiGate device. Based on the exhibit, which statement best describes the configuration applied to the FortiGate device?

Select an option, then click Submit answer.

○ It is a spoke device that establishes dynamic IPsec tunnels to the hub. It can send ADVPN shortcut requests.
○ It is a hub device. It can send ADVPN shortcut offers.
○ It is a hub device and will automatically discover the spoke devices that are part of the SD-WAN topology.
○ It is a spoke device that establishes dynamic IPsec tunnels to the hub. The local subnet range is 10.10.128.0/23.

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 7 (Topic 1)

Refer to the exhibits. Exhibit A - Exhibit B - Exhibit A shows the configuration for an SD-WAN rule and exhibit B shows the respective rule status, the routing table, and the member status. The administrator wants to understand the expected behavior for traffic matching the SD-WAN rule. Based on the exhibits, what can the administrator expect for traffic matching the SD-WAN rule?

Select an option, then click Submit answer.

○ The traffic will be load balanced across all three overlays.
○ The traffic will be routed over T_INET_1_0.
○ The traffic will be routed over T_INET_0_0.
○ The traffic will be routed over T_MPLS_0.

Ask AI for More Explanation

— your own AI account, opens inside the app

Reference / correct answer:

The traffic will be routed over T_INET_1_0.

Most accepted answer: B. The traffic will be routed over T_INET_1_0.

Community votes: B=5, D=2

Selected Answer: B set default isn't enabled, and the default value of "set default" is disabled upvoted 1 times

Selected Answer: D When you use "set gateway enable" in a FortiGate SD-WAN member configuration, it bypasses the usual FIB lookup process. Instead of relying on the forwarding information base to determine the next-hop based on the destination IP, the device uses the explicitly configured gateway address from the SD-WAN member settings. This provides more predictable routing behavior and ensures that traffic is directed through the intended gateway, regardless of what the routing table might otherwise dictate upvoted 2 times 1d21e23 1 year, 3 months ago "set default" is still "disable", which means the requirement for a FIB best match which returns an sdwan member as the destination interface is still in place. upvoted 1 times ...

"set default" is still "disable", which means the requirement for a FIB best match which returns an sdwan member as the destination interface is still in place. upvoted 1 times

Selected Answer: D Services rule 1 set gateway enable, : this instructs Fortigate to skip the FIB lookup, and instead use the gateway address that you configured in the SD-WAN member settings ( PAG 173 7.2) upvoted 2 times

Selected Answer: B Routing for 10.0.0.0/8 is using T_INET_1_0 and T_INET_0_0. SLA shows that T_INET_1_0 has SLA0x1 which is better than SLA0x0 fot T_INET_0_0 upvoted 2 times

About the NSE7-SDW-7-2 Free Practice Test

Prepare for the Fortinet NSE 7 - SD-WAN 7.2 (NSE7-SDW-7-2) exam with this free practice test from Study4Pass, built around the real Fortinet syllabus. You will find 7 free questions, drawn from the full Study4Pass practice set of 70 questions for this exam. The free sample is made up of 7 single-answer questions, each with a full explanation. The Fortinet NSE7-SDW-7-2 exam is part of the Fortinet NSE 7 - SD-WAN 7.2 certification.

The target audience of the Fortinet NSE7-SDW-7-2 exam is professionals who want to validate their skills in Fortinet NSE 7 - SD-WAN 7.2 and demonstrate their competency to employers. The prerequisites of the Fortinet NSE7-SDW-7-2 exam, if any, are defined by Fortinet in the official exam guide.

Certification: Fortinet NSE 7 - SD-WAN 7.2 (NSE7-SDW-7-2)
Vendor: Fortinet
Free on this page: 7 practice questions with answers and explanations
Full practice set: 70 questions

Use the sample the way you would use the real thing: answer each question on your own first, then open the explanation and make sure you understand why the right answer is right. That habit — reasoning instead of memorizing — is what carries over to exam day. When a topic keeps tripping you up, that is your study plan telling you where to go next.

When you finish the sample, do not just count the score — read it. Every missed question names a topic, and the full set lets you train that topic on its own until it stops costing you marks. That loop of test, review and targeted practice is how this set is designed to be used, from the first free question to the last simulation.

Inside the full NSE7-SDW-7-2 practice set:

All 70 questions with answers and explanations
Timed Exam Simulation that mirrors the real exam pressure
Topic Training to drill one domain at a time
Ask AI for More Explanation on every question
Flag questions and review them before you finish

How to use this NSE7-SDW-7-2 free practice test

Pick an answer for each question and check it straight away — the correct answer and a full explanation appear under the question. There is no time limit and nothing to sign up for. When an explanation is not enough, use Ask AI: this is an AI-Enabled practice test, and Ask AI explains the concept behind the question in plain language. When the free sample feels comfortable, the full set of 70 questions adds timed Exam Simulation, topic-by-topic training, and flagged-question review — the closest thing to exam day you can get before the real thing.

What to study for each NSE7-SDW-7-2 domain

The NSE7-SDW-7-2 practice set is built to mirror the full Fortinet NSE 7 - SD-WAN 7.2 syllabus, so every major area of the real exam is represented in the questions. The Fortinet NSE7-SDW-7-2 exam is part of the Fortinet NSE 7 - SD-WAN 7.2 certification. The most reliable study method with a set like this is simple: practise a section, read the explanations, then go back to the official Fortinet documentation for any topic you missed, and repeat until the explanations feel obvious.

NSE7-SDW-7-2 practice test — quick questions

Is this NSE7-SDW-7-2 practice test free?

Yes. Every question on this page — all 7 of them — is free to use, and you never need to create an account to try them.

How many questions are in the full NSE7-SDW-7-2 set?

The full Study4Pass set for NSE7-SDW-7-2 has 70 practice questions. This page gives you 7 of them free so you can judge the quality and difficulty first.

Does the free test show the answers?

Yes. Check any question to reveal the correct answer and its explanation, and use Ask AI whenever you want the underlying concept explained step by step.