Free NSE7-NST-7-2 – Fortinet NSE7-NST-7-2 Practice Test Question

Select an option, then click Submit answer.

• ○ The session will be removed from the session table of the secondary device because of the presence of allowed error packets, which will force the client to restart the session with the server.
• ○ The session state is preserved but the kernel will need to re-evaluate the session because NAT was applied.
• ○ Traffic for this session continues to be permitted on the new primary device after failover, without requiring the client to restart the session with the server.
• ○ The secondary device has this session synchronized; however, because application control is applied, the session is marked dirty and has to be re-evaluated after failover.

Select an option, then click Submit answer.

• ○ The local FortiGate is not a DROther.
• ○ All neighbors are in area 0.0.0.0.
• ○ The local FortiGate is the BDR.
• ○ The network type connecting the local Fortigate and OSPF neighbor 0.0.0.10 is point-to-point.

Select an option, then click Submit answer.

• ○ FSSO is using agentless polling mode to detect logon events.
• ○ The workstation with IP 10.124.2.90 will be polled frequently using TCP port 445 to see if the user is still logged on.
• ○ The logon event can be seen on the collector agent installed on Windows.
• ○ FSSO is using DC agent mode to detect logon events.

Select an option, then click Submit answer.

• ○ The advertised prefix of 10.20.30.0/24 was configured using the network command.
• ○ The first four prefixes are being advertised using a legacy route advertisement.
• ○ The advertised prefix of 10.20.30.0/24 is being advertised through the redistribution of another routing protocol.
• ○ The output shows all prefixes advertised by all neighbors as well as the local router

Select an option, then click Submit answer.

• ○ A UDP session with only one packet received
• ○ A UDP session with packets sent and received
• ○ A TCP session waiting for the SYN ACK
• ○ A TCP session waiting for FIN ACK

Select an option, then click Submit answer.

• ○ diagnose sniffer packet any ‘udp port 500’
• ○ diagnose sniffer packet any ‘ip proto 50’
• ○ diagnose sniffer packet any ‘udp port 4500’
• ○ diagnose sniffer packet any ‘ah’

Select an option, then click Submit answer.

• ○ Return traffic to the initiator is sent to 10.1.0.1.
• ○ Return traffic to the initiator is sent to 10.200.1.254.
• ○ It is an ICMP session from 10.1.10.10 to 10.200.1.1.
• ○ It is an ICMP session from 10.1.10.1 to 10.200.5.1.