Introduction of Fortinet NSE7_EFW-7.0 Exam!

The Fortinet NSE7_EFW-7.0 exam is a Fortinet Certified Network Security Engineer (FCNSE) exam. It is a qualifying exam for the Fortinet NSE 7 certification. This exam tests a candidate's knowledge and skills in configuring, managing, and troubleshooting Fortinet Enterprise Firewall products.

What is the Duration of Fortinet NSE7_EFW-7.0 Exam?

The Fortinet NSE7_EFW-7.0 exam is a 90-minute exam consisting of 60 multiple-choice questions.

What are the Number of Questions Asked in Fortinet NSE7_EFW-7.0 Exam?

There are a total of 60 questions on the Fortinet NSE7_EFW-7.0 Exam.

What is the Passing Score for Fortinet NSE7_EFW-7.0 Exam?

The passing score required to earn the Fortinet NSE7_EFW-7.0 certification is 700 out of 1000.

What is the Competency Level required for Fortinet NSE7_EFW-7.0 Exam?

The Fortinet NSE7_EFW-7.0 exam requires candidates to have at least an Expert level of competency.

What is the Question Format of Fortinet NSE7_EFW-7.0 Exam?

The Fortinet NSE7_EFW-7.0 exam consists of multiple-choice questions.

How Can You Take Fortinet NSE7_EFW-7.0 Exam?

The Fortinet NSE7_EFW-7.0 exam can be taken either online or at a testing center. To take the exam online, you will need to register with Pearson VUE, the official provider of Fortinet certification exams. Once registered, you will be able to select an available time slot and take the exam at your convenience. If you prefer to take the exam at a testing center, you will need to contact your local Pearson VUE center to schedule an appointment.

What Language Fortinet NSE7_EFW-7.0 Exam is Offered?

The Fortinet NSE7_EFW-7.0 exam is offered in English.

What is the Cost of Fortinet NSE7_EFW-7.0 Exam?

The Fortinet NSE7_EFW-7.0 exam is offered for a fee of $150 USD.

What is the Average Salary of Fortinet NSE7_EFW-7.0 Certified in the Market?

The average salary of Fortinet NSE 7 - Enterprise Firewall 7.0 certified professionals varies widely by role, region, and experience, because it depends on the job the certification is combined with. Check current listings in your market for an up-to-date figure.

Who are the Testing Providers of Fortinet NSE7_EFW-7.0 Exam?

Fortinet offers the NSE7_EFW-7.0 exam through Pearson VUE. Pearson VUE is an independent, third-party testing provider that offers certification exams for a variety of vendors, including Fortinet.

What is the Recommended Experience for Fortinet NSE7_EFW-7.0 Exam?

The recommended experience for Fortinet NSE7_EFW-7.0 exam is a minimum of three years of experience in network security and/or related fields, including experience with Fortinet products, technologies, and solutions.

What are the Prerequisites of Fortinet NSE7_EFW-7.0 Exam?

The Fortinet NSE7_EFW-7.0 exam requires that the candidate have a minimum of three years of experience with Fortinet security solutions and a minimum of two years of experience with Fortinet Network Security Expert (NSE) 7 certification. Candidates must also have a valid Fortinet Certified Network Security Professional (FCNSP) certification.

What is the Expected Retirement Date of Fortinet NSE7_EFW-7.0 Exam?

The Fortinet NSE7_EFW-7.0 exam is the current version of the Fortinet NSE 7 - Enterprise Firewall 7.0 exam, and Fortinet has not announced a retirement date for it. When Fortinet introduces a newer version, the retirement date for the older version is published on the Fortinet certification site.

What is the Difficulty Level of Fortinet NSE7_EFW-7.0 Exam?

The difficulty level of the Fortinet NSE7_EFW-7.0 exam is considered to be moderate.

What is the Roadmap / Track of Fortinet NSE7_EFW-7.0 Exam?

The Fortinet NSE7_EFW-7.0 Exam is the final exam in the NSE 7 Network Security Expert Certification Program. To become certified, you must first pass the NSE 6 Network Security Expert Exam and then the NSE 7 Network Security Expert Exam. The NSE 7 Network Security Expert Exam covers the following topics: • Network Security Fundamentals • Firewall Technologies • Network Access Control • Intrusion Prevention Systems • Network Security Management • Virtual Private Networks • Web Application Security • Network Security Auditing To prepare for the NSE 7 Network Security Expert Exam, you should have a good understanding of the topics covered in the NSE 6 Network Security Expert Exam and have hands-on experience with Fortinet products. You should also review the official study guide and practice exam questions provided by Fortinet. Additionally, there are several online resources available to help you prepare for the exam, including practice tests,

What are the Topics Fortinet NSE7_EFW-7.0 Exam Covers?

The Fortinet NSE7_EFW-7.0 exam covers the following topics: 1. Network Security: This topic covers the fundamentals of network security, including the principles of confidentiality, integrity, and availability. It also covers the basics of network security such as firewalls, intrusion prevention systems, and virtual private networks. 2. Security Policies: This topic covers the development and implementation of security policies and procedures. It also covers the use of risk management and auditing tools to ensure that security policies and procedures are being followed. 3. Network Access Control: This topic covers the technologies used to control access to networks, including authentication, authorization, and encryption. 4. Network Security Monitoring: This topic covers the use of network security monitoring tools to detect and respond to security incidents. It also covers the use of log analysis and event correlation. 5. Network Security Architecture: This topic covers the design and implementation of secure network architectures.

What are the Sample Questions of Fortinet NSE7_EFW-7.0 Exam?

1. What is the purpose of the Fortinet Network Security Expert 7.0 (NSE7_EFW-7.0) exam? 2. What is the structure of the NSE7_EFW-7.0 exam? 3. What topics are covered in the NSE7_EFW-7.0 exam? 4. How do you configure network security features such as firewalls, intrusion prevention, and VPNs on a Fortinet device? 5. What is the command-line interface used to manage a Fortinet device? 6. How do you troubleshoot common network security issues using the Fortinet platform? 7. How do you use the FortiGate Security Fabric to manage multiple Fortinet devices? 8. What are the best practices for deploying and managing Fortinet devices? 9. What are the different types of Fortinet licenses and how do they affect the security posture of an organization?

← Back to exam page

Free NSE7_EFW-7.0 – Fortinet NSE 7 - Enterprise Firewall 7.0 Practice Test Question

Free demo downloads

Loading demo links...

Showing 1–10 of 10 questions

Question 1

You have configured FortiManager as a local FDS to provide FortiGate AV and IPS updates, but FortiGate devices are not receiving updates to their AV signature databases, IPS engines, or IPS signature databases.

Which two settings need to be verified for these features to function? (Choose two.)

Select all that apply, then click Submit answer.

○
FortiGate needs to have the server list entry for FortiManager set to server-type update under config system central-management.
○
FortiManager needs to be the license validation server for FortiGate devices trying to retrieve updated AV and IPS packages.
○
Service access needs to be enabled on FortiManager under System Settings > Network.
○
FortiGate needs to have include-default-servers disabled under config system central-management.

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 2

How are bulk configuration changes made using FortiManager CLI scripts? (Choose two.)

Select all that apply, then click Submit answer.

○
When run on the All FortiGate in ADOM, changes are automatically installed without the creation of a new revision history.
○
When run on the Device Database, changes are applied directly to the managed FortiGate device.
○
When run on the Remote FortiGate directly, administrators do not have the option to review the changes prior to installation.
○
When run on the Policy Package, ADOM database, you must use the installation wizard to apply the changes to the managed FortiGate device

Ask AI for More Explanation

— your own AI account, opens inside the app

Reference / correct answer:

When run on the Remote FortiGate directly, administrators do not have the option to review the changes prior to installation.

When run on the Policy Package, ADOM database, you must use the installation wizard to apply the changes to the managed FortiGate device

CLI scripts can be run in three different ways:Device Database: By default, a script is executed on the device database. It is recommend you run the changes on the device database (default setting), as this allows you to check what configuration changes you will send to the managed device. Once scripts are run on the device database, you can install these changes to a managed device using the installation wizard.

Policy Package, ADOM database: If a script contains changes related to ADOM level objects andpolicies, you can change the default selection to run on Policy Package, ADOM database and can then be installed using the installation wizard.

Remote FortiGate directly (through CLI): A script can be executed directly on the device and you don’t need to install these changes using the installation wizard. As the changes are directly installed on the managed device, no option is provided to verify and check the configuration changes through FortiManager prior to executing it.

Question 3

Which the following events can trigger the election of a new primary unit in a HA cluster? (Choose two.)

Select all that apply, then click Submit answer.

○
Primary unit stops sending HA heartbeat keepalives.
○
The FortiGuard license for the primary unit is updated.
○
One of the monitored interfaces in the primary unit is disconnected.
○
A secondary unit is removed from the HA cluster.

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 4

Refer to the exhibit, which shows the output of a diagnose command.

What can you conclude from the output shown in the exhibit? (Choose two.)

Select all that apply, then click Submit answer.

○
This is a pinhole session created to allow traffic for a protocol that requires additional sessions to operate through FortiGate.
○
This is an expected session created by the IPS engine.
○
Traffic in the original direction (coming from the IP address 10.171.121.38) will be routed to the next-hop IP address 10.200.1.1.
○
Traffic in the original direction (coming from the IP address 10.171.121.38) will be routed to the next-hop IP address 10.0.1.10.

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 5

What events are recorded in the crashlogs of a FortiGate device? (Choose two.)

Select all that apply, then click Submit answer.

○
A process crash.
○
Configuration changes.
○
Changes in the status of any of the FortiGuard licenses.
○
System entering to and leaving from the proxy conserve mode.

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 6

An administrator has configured two FortiGate devices for an HA cluster. While testing HA failover, the administrator notices that some of the switches in the network continue to send traffic to the former primary device.

What can the administrator do to fix this problem?

Select an option, then click Submit answer.

○
Configure remote link monitoring to detect an issue in the forwarding path.
○
Configure set send-garp-on-failover enable under config system ha on both cluster members.
○
Verify that the speed and duplex settings match between the FortiGate interfaces and the connected switch ports.
○
Configure set link-failed-signal enable under config system ha on both cluster members.

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 7

View the exhibit, which contains the output of a debug command, and then answer the question below.

Which one of the following statements about this FortiGate is correct?

Select an option, then click Submit answer.

○
It is currently in system conserve mode because of high CPU usage.
○
It is currently in extreme conserve mode because of high memory usage.
○
It is currently in proxy conserve mode because of high memory usage.
○
It is currently in memory conserve mode because of high memory usage.

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 8

Refer to the exhibit, which contains partial output from an IKE real-time debug.

The administrator does not have access to the remote gateway.

Based on the debug output, which configuration change can the administrator make to the local gateway to resolve the phase 1 negotiation error?

Select an option, then click Submit answer.

○
In the phase 1 network configuration, set the IKE version to 2.
○
In the phase 1 proposal configuration, add AES128-SHA128 to the list of encryption algorithms.
○
In the phase 1 proposal configuration, add AESCBC-SHA2 to the list of encryption algorithms.
○
In the phase 1 proposal configuration, add AES256-SHA256 to the list of encryption algorithms.

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 9

Refer to the exhibit, which shows the output of a web filtering diagnose command.

Which configuration change would result in non-zero results in the cache statistics section?

Select an option, then click Submit answer.

○
set server-type rating under config system central-management
○
set webfilter-cache enable under config system fortiguard
○
set webfilter-force-off disable under config system fortiguard
○
set ngfw-mode policy-based under config system settings

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 10

Refer to the exhibit, which shows the output of a debug command.

What can be concluded from the debug command output?

Select an option, then click Submit answer.

○
The OSPF router with the ID 0.0.0.69 has its OSPF priority set to 0.
○
The local FortiGate has a different MTU value from the OSPF router with ID 0.0.0.2, based on the state information.
○
There are more than two OSPF routers on the wan2 network.
○
The interface ToRemote is a broadcast OSPF network.

Ask AI for More Explanation

— your own AI account, opens inside the app

About the NSE7_EFW-7.0 Free Practice Test

This page holds a free practice test for the Fortinet NSE 7 - Enterprise Firewall 7.0 (NSE7_EFW-7.0) certification from Fortinet. You will find 10 free questions, drawn from the full Study4Pass practice set of 60 questions for this exam. The free sample includes 5 single-answer and 5 multiple-answer questions — the same mix of formats you will meet in the full set. The questions follow the same topic balance as the real exam: Network Security, Security Policies, Network Access Control and Network Security Monitoring. The Fortinet NSE7_EFW-7.0 exam is a Fortinet Certified Network Security Engineer (FCNSE) exam.

The target audience for the Fortinet NSE7_EFW-7.0 Exam is IT professionals who want to demonstrate their knowledge and skills in installing, configuring, and troubleshooting Fortinet Network Security solutions. The Fortinet NSE7_EFW-7.0 exam requires that the candidate have a minimum of three years of experience with Fortinet security solutions and a minimum of two years of experience with Fortinet…

Certification: Fortinet NSE 7 - Enterprise Firewall 7.0 (NSE7_EFW-7.0)
Vendor: Fortinet
Free on this page: 10 practice questions with answers and explanations
Full practice set: 60 questions

Use the sample the way you would use the real thing: answer each question on your own first, then open the explanation and make sure you understand why the right answer is right. That habit — reasoning instead of memorizing — is what carries over to exam day. When a topic keeps tripping you up, that is your study plan telling you where to go next.

When you finish the sample, do not just count the score — read it. Every missed question names a topic, and the full set lets you train that topic on its own until it stops costing you marks. That loop of test, review and targeted practice is how this set is designed to be used, from the first free question to the last simulation.

Inside the full NSE7_EFW-7.0 practice set:

All 60 questions with answers and explanations
Timed Exam Simulation that mirrors the real exam pressure
Topic Training to drill one domain at a time
Ask AI for More Explanation on every question
Flag questions and review them before you finish

How to use this NSE7_EFW-7.0 free practice test

Pick an answer for each question and check it straight away — the correct answer and a full explanation appear under the question. There is no time limit and nothing to sign up for. When an explanation is not enough, use Ask AI: this is an AI-Enabled practice test, and Ask AI explains the concept behind the question in plain language. Ready for more? The full 60-question set adds a timed Exam Simulation mode, topic training for your weak areas, and a flagged-question review, so you can practise the way the real exam feels.

What to study for each NSE7_EFW-7.0 domain

Network Security — This topic covers the fundamentals of network security, including the principles of confidentiality, integrity, and availability.
Security Policies — This topic covers the development and implementation of security policies and procedures.
Network Access Control — This topic covers the technologies used to control access to networks, including authentication, authorization, and encryption.
Network Security Monitoring — This topic covers the use of network security monitoring tools to detect and respond to security incidents.
Network Security Architecture — This topic covers the design and implementation of secure network architectures.

NSE7_EFW-7.0 practice test — quick questions

Is this NSE7_EFW-7.0 practice test free?

Yes — the 10 questions on this page are completely free, with no signup and no payment details needed.

How many questions are in the full NSE7_EFW-7.0 set?

60 questions. The 10 free questions above are a sample of that full set, in the same style and topic balance.

Does the free test show the answers?

Yes — every question shows the correct answer with an explanation, and Ask AI can explain the concept behind a question in plain words if you want to go deeper.