Free NSE5_WLS-AD-7.6 – NSE 5 Network Security Analyst Practice Test Question

Select an option, then click Submit answer.

• ○ On the FortiGate GUI, using the WiFi Client monitor
• ○ On the FortiAP CLI, using the cw_diag ksta command
• ○ On the FortiGate CLI, using the diagnose wireless-controller wlac -d sta command
• ○ On the FortiAP CLI, using the cw_diag -d sta command

Select an option, then click Submit answer.

• ○ Brute-force dictionary attacks
• ○ Unauthorized wireless connection
• ○ Rogue access points
• ○ WPA2 authentication vulnerabilities

Select an option, then click Submit answer.

• ○ Control channels
• ○ Data channels
• ○ Security channels
• ○ FortiLink channels

Select an option, then click Submit answer.

• ○ Configure VPN tunnels to transport secured data between the main office and branch offices.
• ○ Deploy further onsite IT personnel to these remote sites to enforce security inspection.
• ○ Transfer local resources from corporate data centers to cloud services to offer access to remote users.
• ○ Implement a teleworker topology to split traffic for further security inspection.

Select an option, then click Submit answer.

• ○ Integrated wireless network access
• ○ Endpoint detection and response
• ○ Compromised wireless client quarantine
• ○ Indicator of attack system

Select an option, then click Submit answer.

• ○ The wider the channel, the more data it can carry.
• ○ Data is transmitted over only one wireless channel at a time.
• ○ The more wireless channels, the more power consumption is required.
• ○ A wireless channel is allocated to transmit data unidirectionally.

Select an option, then click Submit answer.

• ○ WPA3 uses 128-bit session key size
• ○ WPA3 enforces only enterprise security mode
• ○ WPA3 addresses the KRACK vulnerability
• ○ WPA3 prevents legacy and deprecated wireless protocols from being used

Select an option, then click Submit answer.

• ○ To install the access points designed to provide Fortinet UTM services.
• ○ To power the access points with a UTM-capable FortiSwitch device.
• ○ To deploy the SSIDs in bridge mode bridged to the access points subnet.
• ○ To manage the access points by FortiLAN Cloud and create a tunnel between access points.

Select an option, then click Submit answer.

• ○ The wireless client disconnects and connects to a different, available AP.
• ○ The associated AP marks the wireless client as disconnected and must not reconnect.
• ○ The associated AP sends an alert message to the wireless client about the signal drop.
• ○ The wireless client increases its signal power to continue connecting to the same AP.

Select an option, then click Submit answer.

• ○ Create user groups to assign wireless stations once connected to an SSID.
• ○ Create multiple SSIDs for each level of network access.
• ○ Create an SSID and enable dynamic wireless VLAN.
• ○ Create an SSID and enable integrated wireless NAC.