← Back to exam page

HPE6-A46 – Delta - Implementing Aruba Campus Switching Solutions

Loading demo links...

Showing 4–6 of 10 questions

Question 4

Refer to the exhibits.

Exhibit 1

Exhibit 2

The exhibits show the current operational state for routes on Switch-3. The company wants

Switch-3 to send all traffic to 172.16.0.0/16 through Switch-2.

Which single configuration change creates the desired behavior?

Select an option, then click Submit answer.

  • ○

    Change the OSPF external metric type to 1 on Switch-1 and Switch-3.

  • ○

    Change the OSPF external metric type to 2 on Switch-1 and Switch-2.

  • ○

    Set a cost of 15 in the redistribute static command on Switch-2.

  • ○

    Set a cost of 5 in the router ospf area 0.0.0.1 stub command on Switch-1.


Question 5

Refer to the exhibits.

Exhibit 1

Exhibit 2

In the exhibits, VLAN 20 under a device name indicates that the device is configured with that VLAN. The exhibits also indicate whether VLAN 20 is statically configured on each link, either as an untagged or a tagged VLAN. If the link has no label, VLAN 20 is not statically configured on that link.

A network administrator needs to deploy AOS-Switches that use port-based tunneled node.

The plan calls for tunneled-node endpoints to be assigned to VLAN 20 and for the Aruba Mobility Controller to handle the tunneled-node traffic at Layer 2. Which exhibit shows the correct plan for VLAN 20 in the wired infrastructure?

Select an option, then click Submit answer.

  • ○

    A

  • ○

    B

  • ○

    C

  • ○

    D


Question 6

What is a typical reason to implement MAC authentication on an AOS-Switch?

Select an option, then click Submit answer.

  • ○

    to filter traffic at the edge, based on multiple criteria in the MAC header

  • ○

    to provision switch ports to support devices such as IP phones or printers

  • ○

    to enhance the security of an 802.1X solution

  • ○

    to control management access to the switch CLI based on device, as well as user credentials