4A0-105 – Alcatel-Lucent Virtual Private LAN Services

Select an option, then click Submit answer.

• ○

  The device will try to force the other side up using the evaluating flag in the PDU.

• ○

  The device will wait for the trasmit-interval of 5 before trying to rediscover the neighbor.

• ○

  The device will detect the port change and will wait for normal operation mode.

• ○

  The device will detect the port change and revert to discovery mode.
  

Select an option, then click Submit answer.

• ○

  PE-1 must be configured with mesh-SDPs to every node receiving the multicast traffic. There is no way to reduce the replication or bandwidth.

• ○

  PE nodes in Metro 1 could be configured with mesh-SDPs. PE nodes in Metro 2 would be configured with mesh-SDPs. However, the connection between Metro networks (PE-2 to PE-6) can be configured with a spoke-sdp. This would reduce the replication and bandwidth used on the link between Metro networks. This also reduces the replication required by PE-1.

• ○

  PE-1 can be configured with spoke-SDPs to every PE node in both Metro networks. This will reduce the bandwidth and replication within the network.

• ○

  PE nodes in Metro 1 could be configured with spoke-SDPs. PE nodes in Metro 2 would be configured with spoke-SDPs. However, the connection between Metro networks (PE-2 to PE-6) can be configured with a mesh-sdp. This would reduce the replication and bandwidth used on the link between Metro networks. This also reduces the replication required by PE-1.
  

Select an option, then click Submit answer.

• ○

  oam mac-populate

• ○

  oam mac-ping

• ○

  oam mac-trace

• ○

  oam svc-ping

• ○

  oam cpe-ping