During a DD Boost MFR operation, what is the correct sequence of steps followed by Dell EMC NetWorker?

Answer is in the explanation below.
Loading demo links...
Showing 1–10 of 10 questions
During a DD Boost MFR operation, what is the correct sequence of steps followed by Dell EMC NetWorker?

Answer is in the explanation below.
A customer wants to implement EMC Data Domain Extended Retention on a Data Domain system in their environment. What is a requirement for using Extended Retention?
Select an option, then click Submit answer.
SAS card must be available
Usable capacity must be a minimum of 1 PB
Controller must have 92 GB of memory
Must be running a minimum of DD OS 5.1
Refer to Exhibit.

An EMC Data Domain customer has three offices with their payroll backups currently located in San Jose, California. They want to plan a disaster recovery strategy. The customer is concerned with the possibility of multiple disasters that could compromise both the source and destination sites simultaneously.
Which replication topology will address the customer's concerns about availability and RTO?
Select an option, then click Submit answer.
Topology: One-to-many Source: San Jose
Destination: Seattle and Chicago
Topology: One-to-one Source: San Jose Destination: Seattle
Topology: Bidirectional Source: San Jose Destination: Chicago
Topology: Many-to-one
Source: San Jose and Seattle Destination: Chicago
When logging into an EMC Data Domain system during an initial installation, which connection type must be used?
Select an option, then click Submit answer.
Serial Console
FTP
Telnet
IPMI
A company is replicating two specific directories between two EMC Data Domain systems using a 4 Mb/s WAN connection. What can be done on the Data Domain systems to maximize replication performance?
Select an option, then click Submit answer.
Enable low bandwidth optimization
Implement collection replication
Add more replication contexts
Increase WAN bandwidth
A customer is implementing an EMC Data Domain system integrating Symantec NetBackup using CIFS. Which device type should be configured on the backup server to use the Data Domain system?
Select an option, then click Submit answer.
Disk storage unit
Disabled
adv_file type device
Unlimited
Jukebox
2
Backup-to-disk folder
4
How can Retention Lock Compliance be removed from an EMC Data Domain system?
Select an option, then click Submit answer.
Reinstall the operating system from a USB key
Run the file system destroy command
Disable Retention Lock Compliance using security officer credentials
Expire all locked data and then disable Retention Lock
A customer has an EMC Data Domain integrated into their Symantec NetBackup domain as an OST device at their production site. They are installing a new NetBackup media server and a second Data Domain at their disaster recovery (DR) site to protect their client backup images.
How should replication be configured to allow NetBackup to recover client backup data from the DR site in the event the Data Domain at the production site goes offline?
Select an option, then click Submit answer.
Configure NetBackup to duplicate the images between the Data Domain OST devices
Configure MTree replication from the production site to the DR site
Perform snapshots of the NetBackup image directories and replicate those snapshots to the DR site
Use fastcopy at the production site to make a copy of the NetBackup images and replicate them to the DR site
What is a characteristic of the Dell EMC Data Domain Cloud Tier with Retention Lock?
Select an option, then click Submit answer.
Retention Lock is not supported in the cloud tier
Files that are in cloud tier cannot be locked
Cloud unit can be deleted when Data Domain is compliant
Files that are locked on the active tier can be moved to the cloud tier
When a customer deploys an EMC Data Domain system at a remote location that does not have an IT staff, what type of remote management method(s) is possible?
Select an option, then click Submit answer.
Managed with IPMI and SOL commands
Managed with IPMI commands only
Managed with SOL commands only
Managed with iDRAC and SOL commands
Prepare for the Data Domain Specialist for Implementation Engineers (E20-385) exam with this free practice test from Study4Pass, built around the real EMC syllabus. The 10 questions come free from the full 168-question Study4Pass practice set — a quick, honest check of where you stand. The free sample includes 9 single-answer and 1 drag-and-drop questions — the same mix of formats you will meet in the full set. The set follows the real exam’s spread of topics: Data Protection and Availability, Data Storage and Management, Cloud Storage Solutions and Data Protection and Compliance. The EMC E20-385 exam is a certification exam that tests a candidate's knowledge and skills in the area of EMC Data Domain and Avamar Solutions.
The target audience of the EMC E20-385 exam are those professionals who want to prove their expertise in the areas of design, implementation, support, and troubleshooting of a Data Domain… The EMC E20-385 exam requires knowledge of backup and recovery concepts, including backup methods, media, and storage technologies.
Work through the questions one at a time and read every explanation, even for the ones you get right — the reasoning behind an answer is what the real exam tests. If one area keeps costing you marks, you have found exactly what to revise before exam day.
Think of the result as a map, not a verdict. The questions you miss point straight at the topics that need work, and the explanations tell you why the correct option wins. Candidates who loop through that cycle — practise, review the reasoning, re-test — walk into the real exam having already seen their weak spots and fixed them.
Inside the full E20-385 practice set:
There is no clock and no account needed. Answer each question, check the result, and read the explanation before moving on. For anything that still feels unclear, Ask AI is built into this AI-Enabled practice test — it explains the concept behind the question so the next one like it gets easier. When the free sample feels comfortable, the full set of 168 questions adds timed Exam Simulation, topic-by-topic training, and flagged-question review — the closest thing to exam day you can get before the real thing.
Yes. Every question on this page — all 10 of them — is free to use, and you never need to create an account to try them.
The full Study4Pass set for E20-385 has 168 practice questions. This page gives you 10 of them free so you can judge the quality and difficulty first.
Yes. Check any question to reveal the correct answer and its explanation, and use Ask AI whenever you want the underlying concept explained step by step.
No — these are practice questions built to match the E20-385 domains and difficulty level, so you can prepare for the real exam with confidence.