Free D-PST-MN-A-24 – Storage Administrator Practice Test Question

Select an option, then click Submit answer.

• ○

  Uses internal VMware virtual switching and does not require a management network

• ○

  Storage and management use the same LACP bonded cable connection

• ○

  Uses VLTi data switch interconnectivity to support vMotion networks

• ○

  Management and discovery use the same cables and connections as storage
  
  

Select an option, then click Submit answer.

• ○

  Management
  

• ○

  ICM
  

• ○

  ICD
  

• ○

  Storage
  
  

Select an option, then click Submit answer.

• ○

  All the needed management IP addresses for the new appliance must be pre-configured on the cluster

• ○

  Additional appliance does not require a cluster management IP address

• ○

  Additional appliance inherits all its management IPs from the existing appliance

• ○

  All the needed management IP addresses for the new appliance are auto-generated by the cluster
  
  

Select an option, then click Submit answer.

• ○

  Lower model numbered systems require less AC line current than higher model numbered systems

• ○

  T models require less total power than X models

• ○

  X models require less total power than T models

• ○

  Lower model numbered systems require less input voltage (VAC) than higher model numbered systems
  
  

Select an option, then click Submit answer.

• ○

  Verify the new drive is seen

• ○

  Add the drive to the pool

• ○

  Backup the keystore

• ○

  Zero the drive
  
  

Select an option, then click Submit answer.

• ○

  Base enclosure hardware is operating normally

• ○

  Base enclosure has a component hardware fault

• ○

  Cluster has only a single appliance

• ○

  Appliance has a node in service mode
  
  

Select an option, then click Submit answer.

• ○

  Appliance IP address using port 22

• ○

  NAS server IP address using port 26

• ○

  NAS server IP address using port 22

• ○

  Appliance IP address using port 26
  
  

Select an option, then click Submit answer.

• ○

  22

• ○

  26

• ○

  443

• ○

  21
  
  

Select an option, then click Submit answer.

• ○

  Reboot node B

• ○

  Clear the boot mode

• ○

  Disable node B boot mode

• ○

  Return node A to normal mode
  
  

Answer is in the explanation below.