Free 352-011 – Cisco Certified Design Expert Practical Exam Practice Test Question

Answer is in the explanation below.

Answer is in the explanation below.

Select all that apply, then click Submit answer.

• ○

  Set the data center routers as stub-routers

• ○

  Perform summarization at the data centers, selectively leaking routes sent to the remote sites

• ○

  Perform summarization at the remote sites, selectively leaking routes sent to the data centers

• ○

  Set the hello interval timer to be larger than the hold interval

• ○

  Increase the hold interval to accommodate lost hello packets on error-prone links
  
  
  

Select all that apply, then click Submit answer.

• ○

  Transparent mode

• ○

  Routed mode

• ○

  Inline mode

• ○

  Traffic discovery mode

• ○

  Promiscuous mode
  
  
  

Select all that apply, then click Submit answer.

• ○

  At EIGRP AS boundaries

• ○

  At EIGRP interface boundaries

• ○

  At OSPF virtual-link boundaries

• ○

  At EIGRP are boundaries

• ○

  At OSPF area boundaries

• ○

  At EIGRP stub interface boundaries
  
  
  

Select all that apply, then click Submit answer.

• ○

  regional cloud provider access

• ○

  security

• ○

  analytics

• ○

  high availability

• ○

  feature disparity

• ○

  bandwidth
  
  
  

Select all that apply, then click Submit answer.

• ○

  It provides backup convergence for all topologies by avoiding the post-convergence path B. It maximizes the network utilization by load-sharing across low bandwidth and edge links while IGP convergence is in progress

• ○

  No additional protocols are required in the MPLS network because it uses LDP labels to signal the backup path

• ○

  Although it requires enabling segment routing, SR does not have to be activated as the preferred forwarding method

• ○

  It can provide backup paths for IPv4, IPv6 and LDP traffic
  
  
  

Select all that apply, then click Submit answer.

• ○

  If multiple applications share the same DSCP or CoS values, NBAR can be utilized

• ○

  The applications being monitored must be assigned a unique CoS value

• ○

  If multiple applications share the same the same DSCP or CoS values, IPFIX can be
  utilized

• ○

  The applications being monitored must be assigned a unique QoS profile

• ○

  The applications being monitored must be assigned unique DSCP values

• ○

  The reporting data must be assigned to a QoS profile to ensure accurate statistics
  
  
  

Select an option, then click Submit answer.

• ○

  Full mesh

• ○

  Ring

• ○

  Squared

• ○

  Triangulated

• ○

  Partial mesh
  
  
  

Select an option, then click Submit answer.

• ○

  reduces the amount of domain IDs that are used in the fabric

• ○

  does not need to create zoning

• ○

  reduces latency when using local switching on Fibre Channel ports

• ○

  allows trunking to the upstream switch

• ○

  does not need to configure the upstream switches
  
  
  

Select an option, then click Submit answer.

• ○

  The L1 and L2 domains can easily overlap

• ○

  The L2 domain is contained and more stable

• ○

  It can be applied to any kind of topology

• ○

  It reduces the complexity of the L1 domains
  
  
  

Select an option, then click Submit answer.

• ○

  TE tunnel destination address

• ○

  Tunnel path-selection metric

• ○

  Affinity

• ○

  Next-hop backup tunnel
  
  
  

Select an option, then click Submit answer.

• ○

  on both ends of the TCP connection

• ○

  on the side closest to the client

• ○

  on the side closest to the server

• ○

  in the WAN
  
  
  

Select an option, then click Submit answer.

• ○

  Implemented passive OSPF interfaces on the routers not participating on the DR/BDR election.

• ○

  Use access control lists to control outbound advertisements.

• ○

  Ensure DR and BDR routers are placed optimally in the topology.

• ○

  Place all point-to-point links in their own dedicated areas.
  
  
  

Select an option, then click Submit answer.

• ○

  JSON

• ○

  HTMLv5

• ○

  HTML

• ○

  XML

• ○

  BASH