Loading demo links...
Showing 1–15 of 15 questions
DRAG DROP
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Select and Place:
Answer is in the explanation below.
Which two actions can be used in an access control policy rule? (Choose two.)
Select all that apply, then click Submit answer.
Block with Reset
Monitor
Analyze
Discover
Block ALL
What are two features of bridge-group interfaces in Cisco FTD? (Choose two.)
Select all that apply, then click Submit answer.
The BVI IP address must be in a separate subnet from the connected network.
Bridge groups are supported in both transparent and routed firewall modes.
Bridge groups are supported only in transparent firewall mode.
Bidirectional Forwarding Detection echo packets are allowed through the FTD when using bridge-group members.
Each directly connected network must be on the same subnet.
Which two OSPF routing features are configured in Cisco FMC and propagated to Cisco FTD? (Choose two.)
Select all that apply, then click Submit answer.
OSPFv2 with IPv6 capabilities
virtual links
SHA authentication to OSPF packets
area boundary router type 1 LSA filtering
MD5 authentication to OSPF packets
Which two conditions must be met to enable high availability between two Cisco FTD devices? (Choose two.)
Select all that apply, then click Submit answer.
same flash memory size
same NTP configuration
same DHCP/PPoE configuration
same host name
same number of interfaces
Which two routing options are valid with Cisco FTD? (Choose two.)
Select all that apply, then click Submit answer.
BGPv6
ECMP with up to three equal cost paths across multiple interfaces
ECMP with up to three equal cost paths across a single interface
BGPv4 in transparent firewall mode
BGPv4 with nonstop forwarding
Which two features of Cisco AMP for Endpoints allow for an uploaded file to be blocked? (Choose two.)
Select all that apply, then click Submit answer.
application blocking
simple custom detection
file repository
exclusions
application allow listing
When a Cisco FTD device is configured in transparent firewall mode, on which two interface types can an IP address be configured? (Choose two.)
Select all that apply, then click Submit answer.
EtherChannel
BVI
Physical
Subinterface
A network administrator is configuring a Cisco AMP public cloud instance and wants to capture infections and polymorphic variants of a threat to help detect families of malware. Which detection engine meets this requirement?
Select an option, then click Submit answer.
RBAC
Tetra
Ethos
Spero
An engineer is tasked with deploying an internal perimeter firewall that will support multiple DMZs. Each DMZ has a unique private IP subnet range. How is this requirement satisfied?
Select an option, then click Submit answer.
Deploy the firewall in transparent mode with access control policies
Deploy the firewall in routed mode with access control policies
Deploy the firewall in routed mode with NAT configured
Deploy the firewall in transparent mode with NAT configured
An engineer is implementing Cisco FTD in the network and is determining which Firepower mode to use. The organization needs to have multiple virtual Firepower devices working separately inside of the FTD appliance to provide traffic segmentation. Which deployment mode should be configured in the Cisco Firepower Management Console to support these requirements?
Select an option, then click Submit answer.
multi-instance
multiple deployment
single deployment
single-context
A security engineer is deploying a pair of primary and secondary Cisco FMC devices. The secondary must also receive updates from Cisco Talos. Which action achieves this goal?
Select an option, then click Submit answer.
Force failover for the secondary Cisco FMC to synchronize the rule updates from the primary.
Configure the secondary Cisco FMC so that it receives updates from Cisco Talos.
Manually import rule updates onto the secondary Cisco FMC device.
Configure the primary Cisco FMC so that the rules are updated.
A network administrator is implementing an active/passive high availability Cisco FTD pair. When adding the high availability pair, the administrator cannot select the secondary peer. What is the cause?
Select an option, then click Submit answer.
The second Cisco FTD is not the same model as the primary Cisco FTD.
An high availability license must be added to the Cisco FMC before adding the high availability pair.
The failover link must be defined on each Cisco FTD before adding the high availability pair.
Both Cisco FTD devices are not at the same software version.
Which feature is supported by IRB on Cisco FTD devices?
Select an option, then click Submit answer.
dynamic routing protocol
EtherChannel interface
high-availability cluster
An administrator is setting up Cisco Firepower to send data to the Cisco Stealthwatch appliances. The NetFlow_Set_Parameters object is already created, but NetFlow is not being sent to the flow collector. What must be done to prevent this from occurring?
Select an option, then click Submit answer.
Add the NetFlow_Send_Destination object to the configuration
Create a Security Intelligence object to send the data to Cisco Stealthwatch
Create a service identifier to enable the NetFlow service
Add the NetFlow_Add_Destination object to the configuration
This free practice test covers the Securing Networks with Cisco Firepower (300-710 SNCF) (300-710) exam from Cisco. You will find 15 free questions, drawn from the full Study4Pass practice set of 342 questions for this exam. The free sample includes 7 single-answer, 7 multiple-answer and 1 drag-and-drop questions — the same mix of formats you will meet in the full set. The questions follow the same topic balance as the real exam: Management and Troubleshooting, Deployment, Configuration and Integration. The Cisco 300-710 SNCF exam is a certification exam that tests a candidate's knowledge and skills related to implementing and configuring Cisco Secure Networking solutions.
The Cisco 300-710 exam is designed for professionals who want to become a Cisco Certified Specialist in Secure Access Solutions. The Cisco 300-710 exam is a professional-level exam for the Cisco Certified DevNet Professional certification, part of the Cisco Certified DevNet certification track.
Use the sample the way you would use the real thing: answer each question on your own first, then open the explanation and make sure you understand why the right answer is right. That habit — reasoning instead of memorizing — is what carries over to exam day. When a topic keeps tripping you up, that is your study plan telling you where to go next.
When you finish the sample, do not just count the score — read it. Every missed question names a topic, and the full set lets you train that topic on its own until it stops costing you marks. That loop of test, review and targeted practice is how this set is designed to be used, from the first free question to the last simulation.
Inside the full 300-710 practice set:
Pick an answer for each question and check it straight away — the correct answer and a full explanation appear under the question. There is no time limit and nothing to sign up for. When an explanation is not enough, use Ask AI: this is an AI-Enabled practice test, and Ask AI explains the concept behind the question in plain language. Ready for more? The full 342-question set adds a timed Exam Simulation mode, topic training for your weak areas, and a flagged-question review, so you can practise the way the real exam feels.
Yes — the 15 questions on this page are completely free, with no signup and no payment details needed.
342 questions. The 15 free questions above are a sample of that full set, in the same style and topic balance.
Yes — every question shows the correct answer with an explanation, and Ask AI can explain the concept behind a question in plain words if you want to go deeper.
No. This is a practice test: the questions are written to mirror the real 300-710 exam’s topics and difficulty, not copied from it.
