Introduction of Cisco 300-620 Exam!

The Cisco 300-620 DCACI exam is a 90-minute exam associated with the Cisco Certified DevNet Professional certification. This exam tests a candidate's knowledge of designing, deploying, and troubleshooting Cisco data center infrastructure including network, compute, storage, and virtualization.

What is the Duration of Cisco 300-620 Exam?

The Cisco 300-620 exam is 90 minutes long.

What are the Number of Questions Asked in Cisco 300-620 Exam?

There are 60-70 questions in the Cisco 300-620 exam.

What is the Passing Score for Cisco 300-620 Exam?

The passing score for the Cisco 300-620 exam is 700 out of 1000.

What is the Competency Level required for Cisco 300-620 Exam?

The Cisco 300-620 exam is a professional-level exam that requires a high level of competency in designing and implementing Cisco data center technologies. Candidates should have a thorough understanding of Cisco data center technologies, including Cisco Unified Computing System (UCS), Cisco Nexus switches, Cisco Application Centric Infrastructure (ACI), and Cisco Application Virtualization Infrastructure (AVI). Candidates should also have experience with Cisco UCS Director, Cisco UCS Manager, and Cisco UCS Central. Additionally, candidates should have a good understanding of networking protocols, such as TCP/IP, Ethernet, and Fibre Channel.

What is the Question Format of Cisco 300-620 Exam?

The Cisco 300-620 exam has multiple choice, drag-and-drop, fill-in-the-blank, and simulations questions.

How Can You Take Cisco 300-620 Exam?

Candidates can take the Cisco 300-620 exam both online and in a testing center. To take the exam online, candidates must register for the exam through their preferred training partner. After registration, they will be provided with an exam voucher code which can be used to schedule the exam on the Cisco website. To take the exam at a testing center, candidates must first find a Pearson VUE testing center near them. They can then register for the exam on the Pearson VUE website and schedule the exam date.

What Language Cisco 300-620 Exam is Offered?

The Cisco 300-620 exam is offered in English.

What is the Cost of Cisco 300-620 Exam?

The cost of the Cisco 300-620 exam is $300 USD.

What is the Target Audience of Cisco 300-620 Exam?

The target audience of the Cisco 300-620 exam is experienced network professionals who have a minimum of three to five years of experience designing and deploying Cisco data center technologies, including Cisco Unified Computing System (UCS), Cisco Application Centric Infrastructure (ACI), and Cisco Nexus switches. Candidates should also have the knowledge and skills necessary to configure and deploy Cisco ACI Application Policy Infrastructure Controller (APIC) and Cisco Nexus switches.

What is the Average Salary of Cisco 300-620 Certified in the Market?

The average salary of Cisco 300-620 certified professionals varies widely by role, region, and experience, because it depends on the job the certification is combined with. Check current listings in your market for an up-to-date figure.

Who are the Testing Providers of Cisco 300-620 Exam?

The testing provider for the Cisco 300-620 exam is Pearson VUE, both at test centers and through its online proctored service.

What is the Recommended Experience for Cisco 300-620 Exam?

The recommended experience for the Cisco 300-620 exam includes two to five years of hands-on experience with Cisco data center technologies, including Cisco Nexus, Cisco ACI, Cisco UCS, and Cisco HyperFlex. Additionally, candidates should possess a broad knowledge of basic networking concepts, such as IP routing, switching, security, and automation. Knowledge of scripting and automation languages, such as Python and Ansible, is also recommended.

What is the Expected Retirement Date of Cisco 300-620 Exam?

The Cisco 300-620 exam is the current version of the exam, and Cisco has not announced a retirement date for it. When Cisco introduces a newer version, the retirement date for the older version is published on the Cisco certification site.

What is the Difficulty Level of Cisco 300-620 Exam?

The difficulty level of the Cisco 300-620 exam is considered to be moderate. It is recommended that you have a thorough understanding of the topics covered in the exam and have experience in the related technologies before attempting the exam.

What is the Roadmap / Track of Cisco 300-620 Exam?

The Cisco 300-620 exam is part of the CCNP Data Center certification track. It is a 90-minute exam that tests a candidate’s knowledge and skills related to implementing Cisco data center technologies, including data center automation, programmability, storage, and security. It is a qualifying exam for the CCNP Data Center certification. The exam covers topics such as automation, programmability, storage, and security, and is designed to validate a candidate’s ability to design, implement, and troubleshoot Cisco data center technologies.

What are the Topics Cisco 300-620 Exam Covers?

The Cisco 300-620 exam covers the following topics: 1. Designing Cisco Data Center Infrastructure: This section covers topics related to designing Cisco data center infrastructure, including planning and designing a data center, configuring data center components, and troubleshooting data center issues. 2. Implementing Cisco Application Centric Infrastructure (ACI): This section covers topics related to implementing and managing Cisco Application Centric Infrastructure (ACI), including configuring and troubleshooting ACI fabric, configuring and troubleshooting ACI policies, and monitoring ACI performance. 3. Implementing Cisco Storage Network Solutions: This section covers topics related to implementing and managing Cisco storage network solutions, including configuring and troubleshooting Cisco storage network solutions, configuring and troubleshooting Cisco storage protocols, and configuring and troubleshooting Cisco storage virtualization solutions. 4. Implementing Cisco Unified Computing System (UCS): This section covers topics related to implementing and managing Cisco Unified Computing System (

What are the Sample Questions of Cisco 300-620 Exam?

1. What is the purpose of the Cisco Cloud Security Architecture? 2. What are the components of the Cisco TrustSec solution? 3. How can Cisco SD-Access help secure a network? 4. What is the purpose of the Cisco Identity Services Engine (ISE)? 5. How can Cisco Stealthwatch help detect malicious activity? 6. What are the main components of the Cisco SecureX platform? 7. How can Cisco Umbrella help protect against malicious websites? 8. What is the purpose of Cisco Firepower Threat Defense (FTD)? 9. How can Cisco AnyConnect be used to secure remote access? 10. What are the benefits of using Cisco Meraki for network security?

← Back to exam page

Free 300-620 – Implementing Cisco Application Centric Infrastructure (DCACI) Practice Test Question

Free demo downloads

Loading demo links...

Showing 1–15 of 15 questions

Question 1 (ACI Fabric Infrastructure)

DRAG DROP

Refer to the exhibit. A Cisco ACI fabric is newly deployed, and the security team requires more visibility of all inter EPG traffic flows. All traffic in a VRF must be forwarded to an existing firewall pair. During failover, the standby firewall must continue to use the same IP and MAC as the primary firewall. Drag and drop the steps from the left into the implementation order on the right to configure the service graph that meets the requirements. (Not all steps are used.)

Select and Place:

Answer is in the explanation below.

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 2 (External Network Connectivity)

Which two dynamic routing protocols are supported when using Cisco ACI to connect to an external Layer 3 network? (Choose two.)

Select all that apply, then click Submit answer.

○
iBGP
○
VXLAN
○
IS-IS
○
RIPv2
○
eBGP

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 3 (New Update)

What two actions should be taken to deploy a new Cisco ACI Multi-Pod setup? (Choose two.)

Select all that apply, then click Submit answer.

○
Configure MP-BGP on IPN routers that face the Cisco ACI spines.
○
Connect all spines to the IPN.
○
Configure anycast RP for the underlying multicast protocol
○
Configure the TEP pool of the new pod to be routable across the IPN.
○
Increase interface MTU for all IPN routers to support VXLAN traffic.

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 4 (External Network Connectivity)

What are two descriptions of ACI Multi-Site? (Choose two.)

Select all that apply, then click Submit answer.

○
Routers in the Inter-Site network must run OSPF, DHCP relay, and MP-BGP
○
ACI Multi-Site is a solution that allows one APIC cluster to manage multiple ACI sites
○
The Multi-Site orchestrator must be directly attached to one ACI leaf
○
ACI Multi-Site is a solution that supports a dedicated APIC cluster per site
○
The Inter-Site network routers should run OSPF to establish peering with the spines

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 5 (New Update)

$C:\Users\Waqas Shahid\Desktop\Data\Odt data\Untitled.jpg$

Refer to the exhibit. A company decided to decrease its routing footprint and remove RT-2 and RT-3 devices from its data center. Because of that, the exit point must be created from all the tenants by using the common tenant. Which two configuration tasks must be completed to meet these requirements? (Choose two.)

Select all that apply, then click Submit answer.

○
Move subnets from all the bridge domains to the EPG level and mark them with flag Shared between VRFs.
○
Update the L3Out ExtEPG subnet in the common tenant with flag Shared Route Control Subnet and Aggregate Shared Routes.
○
Mark all subnets with flag Shared between VRFs and attach contract Ctr-3 as a provider to all the EPGs.
○
Change contract Ctr-3 scope to Global, consume it by all EPGs, and flag all subnets with flag Shared between VRFs.
○
Export contract Ctr-2 into the tenant TN-1 and attach it as a consumer to all the EPGs in the tenant TN-1.

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 6 (External Network Connectivity)

An engineer is implementing a connection that represents an external bridged network. Which two configurations are used? (Choose two.)

Select all that apply, then click Submit answer.

○
Layer 2 remote fabric
○
Layer 2 outside
○
Layers 2 internal
○
Static path binding
○
VXLAN outside

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 7 (ACI Anywhere)

What are two requirements for the IPN network when implementing a Multi-Pod ACI fabric? (Choose two.)

Select all that apply, then click Submit answer.

○
EIGRP routing
○
PIM ASM multicast routing
○
BGP routing
○
VLAN ID 4
○
OSPF routing

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 8 (New Update)

An engineer must advertise a bridge domain subnet out of the ACI fabric to an OSPF neighbor. Which two configuration steps are required? (Choose two.)

Select all that apply, then click Submit answer.

○
Configure Subnet scope to Advertised Externally
○
Add External Subnet for External EPG flag under External EPG.
○
Create Route Control Profile with the export direction under External EPG.
○
Add L30ut profile to the bridge domain using Associated L30uts section
○
Configure the Subnet under the EPG level.

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 9 (New Update)

A bridge domain for a new endpoint group in the Cisco ACI fabric must meet these requirements:

The bridge domain must function as the default gateway for the subnet so that routing remains within the Cisco ACI fabric.

ARP requests must be managed via Layer 3 unicast packets or be dropped to reduce excessive broadcast traffic.

The impact of misconfigured virtual machines must be kept to a minimum by preventing IP addresses outside of the configured subnet from being routed.

Which set of actions must be taken?

Select an option, then click Submit answer.

○
Disable ARP Flooding.
Enable Limit IP Learning to Subnet.
Enable Unicast Routing on the bridge domain and configure a subnet.
○
Enable Limit IP Learning to Subnet.
Enable Unicast Routing on the bridge domain and configure a subnet.
Set Multi-Destination Flooding to Flood in BD.
○
Set Endpoint Retention Policy to default.
Enable ARP Flooding.
Enable Unicast Routing on the bridge domain and configure a subnet.
○
Enable Unicast Routing on the bridge domain and configure a subnet.
Set L2 Unknown Unicast to Flood.
Disable Endpoint Retention Policy.

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 10 (New Update)

A network engineer is integrating a new Hyperflex storage duster into an existing Cisco ACI fabric The Hyperflex cluster must be managed by vCenter so a new vSphere Distributed switch must be created In addition the hardware discovery must be performed by a vendor-neutral discovery protocol Which set of steps meets these requirements'?

Text, letter Description automatically generated

Select an option, then click Submit answer.

○
Option A
○
Option B
○
Option C
○
Option D

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 11 (ACI Management)

Refer to the exhibit. Which action should be taken to ensure authentication if the RADIUS servers are unavailable?

Select an option, then click Submit answer.

○
Adjust the priority of server 10.1.1.1 to 1.
○
Assign the user to the default role.
○
Set the default login realm to LDAP.
○
Set the fallback login to local.

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 12 (ACI Management)

Which statement about ACI syslog is true?

Select an option, then click Submit answer.

○
Notifications for different scopes of syslog objects can be sent to only one destination.
○
Syslog messages are sent to the destination through the spine.
○
All syslog messages are sent to the destination through APIC.
○
Switches send syslog messages directly to the destinations.

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 13 (ACI Packet Forwarding)

An engineer configured Layer 2 extension from the ACI fabric and changed the Layer 2 unknown unicast policy from Flood to Hardware Proxy. How does this change affect the flooding of the L2 unknown unicast traffic?

Select an option, then click Submit answer.

○
It is forwarded to one of the spines to perform as a spine proxy.
○
It is flooded within the whole fabric.
○
It is dropped by the leaf when the destination endpoint is not present in the endpoint table.
○
It is forwarded to one of the APICs to perform as a proxy.

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 14 (Integrations)

In the context of VMM, which protocol between ACI leaf and compute hosts ensures that the policies are pushed to the leaf switches for immediate and on demand resolution immediacy?

Select an option, then click Submit answer.

○
VXLAN
○
LLDP
○
IS-IS
○
STP

Ask AI for More Explanation

— your own AI account, opens inside the app

Question 15 (New Update)

A network engineer configures the Cisco ACI fabric to connect to vCenter with these requirements:

Port groups must be automatically created on the distributed virtual switch.

Port groups must use the VLAN allocation in the range between 20-30.

The deployment must optimize the CAM space on the leaf switches.

Which set of actions meets these criteria?

Select an option, then click Submit answer.

○
Create a dynamic VLAN pool with the VLAN range of 20-30.
Create a VMM domain and associate it with the VLAN pool.
Create the EPG and associate the domain.
Set the deployment immediacy to On Demand.
○
Create a dynamic VLAN pool with the VLAN range of 20-30.
Create a physical domain and associate it with the VLAN pool.
Create the EPG and associate the domain.
Set the deployment immediacy to On Demand.
○
Create a static VLAN pool with the VLAN range of 20-30.
Create a physical domain and associate it with the VLAN pool.
Create the EPG and associate the domain.
Set the deployment immediacy to Immediate.
○
Create a static VLAN pool with the VLAN range of 20-30.
Create a VMM domain and associate it with the VLAN pool.
Create the EPG and associate the domain.
Set the deployment immediacy to Immediate.

Ask AI for More Explanation

— your own AI account, opens inside the app

About the 300-620 Free Practice Test

This free practice test covers the Implementing Cisco Application Centric Infrastructure (300-620 DCACI) (300-620) exam from Cisco. The 15 questions are a free sample of the full Study4Pass practice set of 220 questions, so you can check your level before you commit to the real exam. The free sample includes 7 single-answer, 7 multiple-answer and 1 drag-and-drop questions — the same mix of formats you will meet in the full set. Questions are spread across the areas that matter most on the real exam: ACI Fabric Infrastructure, ACI Management, External Network Connectivity and ACI Packet Forwarding. The Cisco 300-620 DCACI exam is a 90-minute exam associated with the Cisco Certified DevNet Professional certification.

The target audience of the Cisco 300-620 exam is experienced network professionals who have a minimum of three to five years of experience designing and deploying Cisco data center technologies,… The 300-620 DCACI exam requires that individuals have a valid Cisco Certified Network Associate (CCNA) certification.

Certification: Implementing Cisco Application Centric Infrastructure (300-620 DCACI) (300-620)
Vendor: Cisco
Free on this page: 15 practice questions with answers and explanations
Full practice set: 220 questions

Treat this sample as a diagnostic. Answer honestly, check the explanation after every question, and note which topics feel shaky. A short, focused review of those topics is worth more than re-reading everything — and the full set lets you drill them topic by topic.

A good way to use this page: take the whole sample in one sitting, then go back over every explanation with fresh eyes. Mark the topics that felt uncertain, not just the ones you got wrong — uncertain answers are unmarked risk on the real exam. One or two focused passes like this usually move a score more than days of passive reading.

Inside the full 300-620 practice set:

All 220 questions with answers and explanations
Timed Exam Simulation that mirrors the real exam pressure
Topic Training to drill one domain at a time
Ask AI for More Explanation on every question
Flag questions and review them before you finish

How to use this 300-620 free practice test

Answer a question, then check the result to see the correct answer and the explanation behind it. Work at your own pace — there is no timer and no signup. Stuck on a concept? This is an AI-Enabled practice test: use Ask AI on any question and get the underlying concept explained in plain words, so you learn the reasoning instead of memorizing answers. Ready for more? The full 220-question set adds a timed Exam Simulation mode, topic training for your weak areas, and a flagged-question review, so you can practise the way the real exam feels.

What to study for each 300-620 topic

ACI Fabric Infrastructure — about 20% of this practice set — Work through the ACI Fabric Infrastructure questions until the reasoning behind each answer is clear — guessing your way past this area will show up on exam day.
ACI Management — about 13% of this practice set — Use the practice questions to find your gaps in ACI Management first, then read the official Cisco documentation for anything you missed.
External Network Connectivity — about 8% of this practice set — For External Network Connectivity, focus on understanding why each correct answer is right; the real exam rewards reasoning over recall.
ACI Packet Forwarding — about 8% of this practice set — Drill ACI Packet Forwarding with the questions above, and revisit any explanation that surprises you — surprises are exactly what to fix before the exam.
Integrations — about 6% of this practice set — Work through the Integrations questions until the reasoning behind each answer is clear — guessing your way past this area will show up on exam day.
ACI Anywhere — about 4% of this practice set — Use the practice questions to find your gaps in ACI Anywhere first, then read the official Cisco documentation for anything you missed.

300-620 practice test — quick questions

Is this 300-620 practice test free?

Yes — the 15 questions on this page are completely free, with no signup and no payment details needed.

How many questions are in the full 300-620 set?

220 questions. The 15 free questions above are a sample of that full set, in the same style and topic balance.

Does the free test show the answers?

Yes — every question shows the correct answer with an explanation, and Ask AI can explain the concept behind a question in plain words if you want to go deeper.