Free 170-010 – Brocade Certified vRouter Engineer Practice Test Question

Select all that apply, then click Submit answer.

• ○

  Enable logging of the NAT rule.

• ○

  Enable logging of the NAT rulebase.

• ○

  Ensure there is sufficient disk space for potential logged information.

• ○

  Enable debug-level logging on the device.
  

Select all that apply, then click Submit answer.

• ○

  source port

• ○

  action

• ○

  protocol

• ○

  destination address
  

Select all that apply, then click Submit answer.

• ○

  edit

• ○

  set

• ○

  rename

• ○

  delete

• ○

  modify
  

Select all that apply, then click Submit answer.

• ○

  The file is organized hierarchically.

• ○

  The file is named config.boot.

• ○

  The system only supports one active configuration file.

• ○

  You cannot delete the file.

• ○

  The file is encrypted.
  

Select all that apply, then click Submit answer.

• ○

  speed

• ○

  mac

• ○

  hw-id

• ○

  mtu

• ○

  duplex
  

Select an option, then click Submit answer.

• ○

  to establish a reliable connection between two network peers

• ○

  to exchange information about transmission windows

• ○

  to determine the Layer 4 ports used for the connection

• ○

  to set the priority for handing the data exchange
  

Select an option, then click Submit answer.

• ○

  show ip route static

• ○

  show route static

• ○

  show static route

• ○

  show ip route filter static
  

Select an option, then click Submit answer.

• ○

  The address lease interval is 24 hours.

• ○

  10.224.7.40 is the first address in the pool named Windows.

• ○

  The pool named ClientLAN has 11 total addresses.

• ○

  PC-HR-34 is connected directly to the vRouter.
  

Select an option, then click Submit answer.

• ○

  DHCP is configured on eth2.

• ○

  PC-HR-34 is the first device connected to eth2.

• ○

  The pool named ClientLAN has 11 total addresses.

• ○

  The lease interval is 24 hours.
  

Select an option, then click Submit answer.

• ○

  You must verify that the install process found all of the device interfaces.

• ○

  You must verify the hardware addresses of the device interfaces.

• ○

  You must confirm the root login and password.

• ○

  You must confirm the administrator login and password.