Identify the fibers below as either single mode (SM) or multi-mode (MM) by dragging the appropriate term into each oval.

Answer is in the explanation below.
Loading demo links...
Showing 1–15 of 15 questions
Identify the fibers below as either single mode (SM) or multi-mode (MM) by dragging the appropriate term into each oval.

Answer is in the explanation below.
Which two of the following are ADVANTAGES of aerial pathways? (Select two options.)
Select all that apply, then click Submit answer.
Quick to install
Has a low initial installation cost
Affect the aesthetic appearance of the property
Economical over a long life
Readily accessible for maintenance
What's the MINIMUM depth of a trench from top of the cable/conduit to final grade? (Select two options.)
Select all that apply, then click Submit answer.
305 mm(12 in)
610 mm (24 in)
914 mm (36 in)
1270 mm (50 in)
Below the area's 50-year frost line
Which two of the following are ADVANTAGES of underground conduit systems? (Select two options.)
Select all that apply, then click Submit answer.
Provide additional physical cable protection
Not adaptable for future facility placement or removal without disturbing the property
Economical over a long life
Require more installation time than aerial or direct-buried installations
Route planning is not as critical as aerial or direct-burial
A project's installation start involves a Kickoff Meeting and the General Contractor's Coordination Meeting. As part of the designer's responsibilities, which two of the following ate key elements of the Kick-off Meeting? (Select two options.)
Select all that apply, then click Submit answer.
Project submittal approval process
RFI process
Payment procedures
Punch List process
Project start and completion dates
Which two of the following are included in the ICT distribution designer's role of vendor and contractor coordination'? (Select two options.)
Select all that apply, then click Submit answer.
Conduct final ICT inspections to ensure standard and code compliance, design intent, and/or client requirements are met.
Monitor project schedule for delays
Produce ICT closeout documentation for the owner to provide the record documentation of the installation
Communicate status to stakeholders
Assist in the resolution of unforeseen conditions, change orders. RFIs, and changes to the project's critical path
Which two of the following documents MUST be submitted by the communication's project contractor for review and approval? {Select two options.)
Select all that apply, then click Submit answer.
Test reports
Shop drawings
Cost summary
Site survey
Request for information (RFI)
When estimating an ICT distribution designer project timeline schedule based on the scope of work which two scheduling methods use network diagrams lo integrate logical activities and identify critical paths on the project? (Select two options.)
Select all that apply, then click Submit answer.
If This Then That (IFTT)
Gantt Chart
Work Breakdown Structure (WBS)
Critical Path Method (CPM)
Program Evaluation Review Technique (PERT)
An ICT distribution designer is preparing a price quote for a building design with multiple floors originally sized at 40.000 ft (3716 m2). While the designer is preparing the quote, the structural engineer indicates the building has been increased in size to accommodate an additional 40,000 ft2 (3716 m3) per floor. The designer's recommendation to the engineer will be to increase the slot area by_____for each additional 40,000 ft3 (3716 m2)
Select an option, then click Submit answer.
0.006 m2 (8 in2)
0.008 m2 (12 in2)
0.040 m2 (60 in3)
0.60 m2 (80 in3)
A software development program will launch iterative versions of new software called Alpha over two years Following that, a program will be released to the program team and developers to create new software called Beta While the program manager prepares the program closure plan tor Alpha, the program sponsor expresses concern about its support after program closure.
What should the program manager do as part of Alpha's program closure plan?
Select an option, then click Submit answer.
Execute the transition plan and Include Knowledge transfer to transition Alpha support to operations
Keep the Alpha program open until support is no longer required, then execute program closure
Adjust Alpha's exit criteria to ensure its support is included in the Beta program
Document the program closure procedure to ensure that resources are released from Alpha to develop Beta
A program is midway through the program delivery phase when a key stakeholder asks if the program is meeting its defined objectives.
How should the program manager demonstrate the program's progress"?
Select an option, then click Submit answer.
Define the key performance indicators (KPIs) for the program's outcome
Invite the key stakeholder to review the program charter and the program objectives
Provide additional program performance reports to the key stakeholder
Maintain the benefits register and provide it to the key stakeholder
A program manager is responsible for constructing a USS50 million building Management suggests it will take three years to complete The program manager can select a design-build option to optimize the construction schedule to 1 5 years However heavy demand for steel is causing price increases and delivery delays. II this trend continues, it could take as long as 4.5 years to complete construction. You learn that a new technology can yield a definitive delivery schedule of 1 25 years
What is the expected time of delivery?
Select an option, then click Submit answer.
1.25 years
1 50 years
175 years
1 00 years
You are designing a multi-story dwelling and need to place the CTR's. Every floor is not available. What is the alternate spacing for the CTRs?
Select an option, then click Submit answer.
Every 2 floors
Every 3 floors
Every 4 floors
Every 5 floors
1st floor and midway up through the height of the building
The program manager wants to ensure that a program contributes to shareholder value. The program manager should verify alignment with which of the following?
Select an option, then click Submit answer.
Program charter
Organizational structures and policies
Organizational strategic objectives
Program governance plan
In a PON deployment, which active device is installed at the work area?
Wireless access point
Select an option, then click Submit answer.
Optical amplifier
Optical line terminal
Optical network terminal
Splitter
Prepare for the BICSI Registered Communications Distribution Designer – RCDDv14 (RCDDv14) exam with this free practice test from Study4Pass, built around the real BICSI syllabus. You will find 15 free questions, drawn from the full Study4Pass practice set of 288 questions for this exam. The free sample includes 7 single-answer, 7 multiple-answer and 1 drag-and-drop questions — the same mix of formats you will meet in the full set. The questions follow the same topic balance as the real exam: Telecommunications Distribution Methods, Network Design, Telecommunications System Design and Telecommunications System Installation. BICSI RCDDv14 is an exam administered by BICSI (Building Industry Consulting Service International) that assesses an individual's knowledge of design and installation of information technology systems.
The BICSI RCDDv14 Exam is designed for professionals in the information and communications technology (ICT) industry who have at least two years of experience in the design, integration, and installation… The Prerequisite for BICSI RCDDv14 Exam is that the candidate must have a minimum of two years of experience in the design, integration and implementation of structured cabling systems.
Use the sample the way you would use the real thing: answer each question on your own first, then open the explanation and make sure you understand why the right answer is right. That habit — reasoning instead of memorizing — is what carries over to exam day. When a topic keeps tripping you up, that is your study plan telling you where to go next.
When you finish the sample, do not just count the score — read it. Every missed question names a topic, and the full set lets you train that topic on its own until it stops costing you marks. That loop of test, review and targeted practice is how this set is designed to be used, from the first free question to the last simulation.
Inside the full RCDDv14 practice set:
Pick an answer for each question and check it straight away — the correct answer and a full explanation appear under the question. There is no time limit and nothing to sign up for. When an explanation is not enough, use Ask AI: this is an AI-Enabled practice test, and Ask AI explains the concept behind the question in plain language. When the free sample feels comfortable, the full set of 288 questions adds timed Exam Simulation, topic-by-topic training, and flagged-question review — the closest thing to exam day you can get before the real thing.
Yes. Every question on this page — all 15 of them — is free to use, and you never need to create an account to try them.
The full Study4Pass set for RCDDv14 has 288 practice questions. This page gives you 15 of them free so you can judge the quality and difficulty first.
Yes. Check any question to reveal the correct answer and its explanation, and use Ask AI whenever you want the underlying concept explained step by step.
No — these are practice questions built to match the RCDDv14 domains and difficulty level, so you can prepare for the real exam with confidence.