Question 1
(General Metrology)What is the SI base unit for mass?
Select an option, then click Submit answer.
- ○ Kilogram
- ○ Gram
- ○ Pound
- ○ Newton
Showing 1–10 of 10 questions
Select an option, then click Submit answer.
Select an option, then click Submit answer.
Select an option, then click Submit answer.
Select an option, then click Submit answer.
Select an option, then click Submit answer.
Select an option, then click Submit answer.
Select an option, then click Submit answer.
Select an option, then click Submit answer.
Select all that apply, then click Submit answer.
Select all that apply, then click Submit answer.
This page holds a free practice test for the Certified Calibration Technician (CCT) certification from ASQ. You will find 10 free questions, drawn from the full Study4Pass practice set of 80 questions for this exam. The questions follow the same topic balance as the real exam: General Metrology; Measurement Systems; Calibration Systems; Measurement Uncertainty and Applied Math; Quality Systems and Standards.
Pick an answer for each question and check it straight away — the correct answer and a full explanation appear under the question. There is no time limit and nothing to sign up for. When an explanation is not enough, use Ask AI: this is an AI-Enabled practice test, and Ask AI explains the concept behind the question in plain language. Ready for more? The full 80-question set adds a timed Exam Simulation mode, topic training for your weak areas, and a flagged-question review.
Covers the seven SI base units and derived units, SI multipliers and conversions, fundamental constants, and common measurements such as temperature, pressure, torque, mass, and electrical quantities. It also addresses traceability, the standards hierarchy, types of measurement standards, and substitution of standards.
SI base and derived units, unit conversions, fundamental constants, traceability hierarchy, primary and working standards, common measurement quantities
Covers direct, indirect, ratio, transfer, differential, and substitution measurement methods, plus characteristics such as repeatability, reproducibility, bias, linearity, stability, sensitivity, and resolution. It also addresses specification terms, error sources, measurement data, and measurement assurance programs including gage R&R and SPC.
measurement methods, repeatability and reproducibility, bias and linearity, resolution and sensitivity, percent of full scale and reading, error sources, gage R&R, measurement assurance
Covers calibration procedures, standardisation and adjustment methods such as zeroing, spanning, nulling, and linearisation, industry practices and regulations, and environmental control. It also addresses the calibration process flow, scheduling and roles, validation of manual and automated systems, records management, and official reports such as certificates and labels.
calibration procedures, zeroing and spanning, environmental control, scheduling and overdue control, system validation, records management, calibration certificates and labels
Covers uncertainty terminology including guard-banding, false acceptance and rejection, test uncertainty ratio (TUR), and test accuracy ratio (TAR), plus Type A and Type B uncertainty budget components. It also addresses combined and expanded uncertainty, coverage factors, and applied mathematics including conversions, ratios, significant figures, algebra, and angular conversions.
TUR and TAR, Type A and Type B evaluation, uncertainty budgets, root sum square, expanded uncertainty and coverage factor, unit conversions, rounding and significant figures
Covers quality management system components, the seven basic quality tools, quality audits, and corrective action for nonconformances including impact assessment for out-of-tolerance equipment. It also addresses professional conduct and ethics, occupational safety, and quality standards and guides such as ISO 9001, ISO/IEC 17025, ISO 10012, the GUM, and the VIM.
quality management systems, seven quality tools, audit types, nonconformance and corrective action, ASQ ethics, safety and PPE, ISO/IEC 17025, GUM and VIM
Yes — the 10 questions on this page are completely free, with no signup and no payment details needed.
80 questions. The 10 free questions above are a sample of that full set, in the same style and topic balance.
Yes — every question shows the correct answer with an explanation, and Ask AI can explain the concept behind a question in plain words if you want to go deeper.