Loading demo links...
What to study for each AN-FN-OP01 domain
Layer 2 Switching — VLANs and STP
Configuring Virtual Local Area Networks (VLANs) and Spanning Tree Protocol (STP) in EOS, including access and trunk ports, root election, port states and costs, and VLAN use on leaf switches in leaf-spine architectures.
Key skills
VLANs: Configuring Virtual Local Area Networks (VLANs); STP: Configuring Spanning Tree Protocol (STP)
MLAG and Port-Channels
MLAG configuration and management in EOS, including MLAG domains, the peer link and peer-address heartbeat, dual-primary handling, and port-channels (including LACP) to downstream devices across both MLAG peers, with SVIs and VARP as covered in the datasheet objective.
Key skills
MLAG configuration and management; setting up MLAG domains, port-channels, VARP, and SVIs
Layer 3 Routing — SVIs, VARP and Static Routing
Layer 3 forwarding for VLAN subnets using SVIs and VARP gateways, routed ports, and static routing including default routes, next-hop reachability and route preference, as scoped by the datasheet objective.
Key skills
Static Routing: Configuring static routing peers; configuring SVIs and VARP
OSPF Routing
OSPF routing in EOS, including neighbour discovery and adjacencies, hello/dead timers, broadcast and point-to-point network types, DR/BDR election, areas, multi-area topologies, ABRs, summary LSAs and OSPF cost.
Key skills
OSPF Routing; configuring OSPF with different network types, multi-area topologies, and adjacencies
Security — ACLs and IPv6
Basic network security using ACLs — ACL types and configurations, ordered rule evaluation, interface application and the implicit deny — together with basic IPv6 configurations including 128-bit addressing and /64 subnets.
Key skills
ACLs: ACL Types and configurations; IPv6: Basic IPv6 Configurations
Monitoring and Troubleshooting
Monitoring and troubleshooting EOS networks with a systematic approach using topology diagrams and addressing tables: connectivity checks for IP reachability, port-channel status and routing tables across MLAG and OSPF setups, and diagnostic show commands for MLAG states and OSPF neighbours and routes.
Key skills
Connectivity checks: Verifying IP reachability, port-channel status, and routing tables across MLAG and OSPF setups; Diagnostic commands: Proficiency in show commands for MLAG states and OSPF neighbors/routes
AN-FN-OP01 practice test — quick questions
Is this AN-FN-OP01 practice test free?
Yes — the 10 questions on this page are completely free, with no signup and no payment details needed.
How many questions are in the full AN-FN-OP01 set?
80 questions. The 10 free questions above are a sample of that full set, in the same style and topic balance.
Does the free test show the answers?
Yes — every question shows the correct answer with an explanation, and Ask AI can explain the concept behind a question in plain words if you want to go deeper.