5V0-42.21 VMware SD-WAN Design and Deploy Skills

Loading demo links...

Showing 4–6 of 9 questions

Question 4

A customer is using hypervisor to install VMware Partner Gateways.

Which two hypervisors may be used? (Choose two.)

Select all that apply, then click Submit answer.

  • Hyper-V

  • Kubermetes

  • XenServer

  • KVM

  • ESXi

Question 5

A service provider assigns two Partner Gateways to a VMware SD-WAN Edge.

Which description is correct about default route.

Select an option, then click Submit answer.

  • A default route 0.0.0.0/0 can be configured as a static route and set to NAT only on the Gateway

  • It default route 0 0 0.010 has been configured for both Gateways, internet traffic originated from the Edge can failover to the other Gateway in case of a Gateway failure.

  • When handoff is turned off on a Partner Gateway, the Gateway does not advertise a default route 0.0 0.0/0 to the Edge.

  • The service provider administrator decides whether the Partner Gateway advertises a default route 0.0.0.0/0 or not, although it is advertised by default.

Question 6

A network architect is designing a VMware SD-WAN architect for customer using VMware hosted VCO and VCGs, white VCEs will be deployed at the customer’s branches and data centers. The network architect would like to achieve control plane redundancy.

Which action, if any, should be taken to meet this goal?

Select an option, then click Submit answer.

  • Multiple VCGs are automatically assigned to every VCE and control plane on VCUs is always enabled, so control plane redundancy has been taken care of already

  • Multiple VCFs at data centers can be contoured to function as route reflectors to achieve control plane redundancy.

  • VCGs automatically assigned to a VCF. do not participate in control plane At least two dedicated Controllers should be manually assigned for each VCGs to achieve control plane redundancy.

  • VCGs automatically assigned to a VCE do not participate in control plane At least two dedicated Controllers should be manually assigned for the customer to achieve control plane redundancy