← Back to exam page

NS0-515 – NetApp Certified Implementation Engineer-E-Series

Loading demo links...

Showing 1–3 of 10 questions

Question 1

What are two methods for setting the host protocol configuration on the E2800 controller with a 4-port 16Gbps FC or 10Gbps iSCSI SFP+ host interface card (HIC)? (Choose two.)

Select all that apply, then click Submit answer.

  • ○

    Set at the factory, based on the order
  • ○

    Change the QSFP type in the HIC
  • ○

    Change the Feature Pack in the SANtricity System Manager
  • ○

    Set in the Hardware tab using SANtricity System Manager
Question 2

A customer needs to add an EF280 with FC into its existing Brocade fabric but the FC ports in the SANtricity System Manager are showing the FC ports as down and the LED on the FC HIC is amber.

Which three tasks does the installer need to complete to solve this problem? (Choose three.)

Select all that apply, then click Submit answer.

  • ○

    Verify that the ports are enabled on the switch
  • ○

    Verify that the cables are plugged into the switch
  • ○

    Verify that the server HBA has the boot BIOS enabled
  • ○

    Verify that the EF280s management port is up
  • ○

    Verify that the switch zone has the WWPNs for the EF280 and Server HBAs
Question 3

In which two locations would you find the WWPNs for a Windows host? (Choose two.)

Select all that apply, then click Submit answer.

  • ○

    FC switch
  • ○

    host’s BIOS
  • ○

    Windows Device Manager
  • ○

    HBA vendor’s utility