← Back to exam page

H12-891_V1.0 – HCIE-Datacom V1.0

Loading demo links...

Showing 1–3 of 20 questions

Question 1

In an MPLSVPN network, when a packet enters the Internet and is forwarded, it is encapsulated with two layers of MPLS tags, and the processing of the packet in the following options is described correctly?

Select all that apply, then click Submit answer.

  • ○

    The penultimate hop device receives packets with an outer label of 3
  • ○

    The Egress PE appliance receives an UNlabeled IP packet
  • ○

    The Egress PE device correctly sends packets to the appropriate VPN
  • ○

    based on the inner tag The packet pops up the outer label on the penultimate hop device and forwards it to the Egress PE device
Question 2

What descriptions of the OSPF protocol are correct?

Select all that apply, then click Submit answer.

  • ○

    AS-External-LSA describes the router's path to ASBR
  • ○

    The cost value of the second type of external route is only the AS external cost value, ignoring the AS internal cost value
  • ○

    AS-External-LSA does not belong in any region
  • ○

    AS-External-LSA describes the path to the as outside of the route, and the scope of the flood is the AS outside
Question 3

??? aggregate ipv4-address { mask/masklength }[as-set lattribute-policy route-policy-namel ldetail-suppressedlorigin-policy route-

in policy-name2[suppress3policy route-policy-name3], multiple parameters can be used to influence summary routes and their results. The correct description about the command is ?( Multiple choice questions).

Select all that apply, then click Submit answer.

  • ○

    If As-set is configured, the A S_PATH of the aggregate route contains ass path information for all specific routes in case the route loop is blocked
  • ○

    If Suppress-policy is configured, aggregate routes are also generated, and the if-match clause in Route-policy is used to pick suppressed detail routes. Detail routes that match Route-policy are still advertised to other BGP neighbors
  • ○

    If Origin-policy is configured, only detail routes that match Route-policy can participate in aggregation
  • ○

    If You configure The Interface-policy, you can change the properties of the aggregate route