CWNA-107 Certified Wireless Network Administrator

Loading demo links...

Showing 1–3 of 6 questions

Question 1

You are attempting to locate the cause of a performance problem in two WLAN cells in a mostly overlapping coverage area. You note that one AP is on channel 1 and the other is on channel 2. When you document your findings, what term do you use to describe the problem in this configuration?

Select all that apply, then click Submit answer.

  • Bluetooth interference

  • Non-Wi-Fi interference

  • CCI

  • ACI

Question 2

What statement about the beamwidth of an RF antenna is true?

Select an option, then click Submit answer.

  • Horizontal and vertical beamwidth are calculated at the point where the main lobe decreases power by 3 dB.

  • Vertical beamwidth is displayed (in degrees) on the antenna’s Azimuth chart.

  • When antenna gain is lower, the beamwidth is also lower in both the horizontal and vertical dimensions.

  • The beamwidth patterns on an antenna polar chart indicate the point at which the RF signal stops propagating.

Question 3

What is an advantage of using WPA2-Personal instead of WEP-128 as a security solution for 802.11 networks?

Select an option, then click Submit answer.

  • WPA2-Personal uses CCMP for encryption, and WEP-128 uses TKIP for encryption

  • WPA2-Personal uses dynamic encryption keys, and WEP-128 uses static keys

  • WPA2-Personal uses 802.1X/EAP for authentication, and WEP-128 uses preshared keys

  • WPA2-Personal is based on IEEE 802.11 industry standards, but WEP is not