← Back to exam page

300-370 – Troubleshooting Cisco Wireless Enterprise Networks

Loading demo links...

Showing 7–9 of 10 questions

Question 7

Refer to the exhibit. An engineer has connected APs with locally significant certificates and is joining them to the controller. What is causing one of the APs to fail the join phase?

Select an option, then click Submit answer.

  • ○

    The controller auth-list is not configured to accept LCS apps.
  • ○

    The AP does not have the required certificate.
  • ○

    The time configured on the controller does not match that of the AP certificate.
  • ○

    The controller does not have the config auth-list ap-policy mic disable command.
Question 8

A client is failing PEAP authentication and a debug shows the server is sending an Access-Reject message.

Which action must you take to resolve authentication?

Select an option, then click Submit answer.

  • ○

    Verify that the user is using the same password that is on the server.
  • ○

    Verify that the user account is the same in the client certificate.
  • ○

    Verify that the validate server certificate on the client is disabled.
  • ○

    Verify that the client certificates are from the proper CA and server certificate.
Question 9

Refer to the exhibit.

Access points are deployed in an office building and users report that the real-time communications quality of experience is poor when users walk between the elevators. The elevators are a heavy metallic obstacle, and AP 3 was installed to cover the elevator area, which AP 1 and AP 2 signal does not reach. Communications are captured for a user walking from point A to point C, and it is observed that the user's iPhone device suddenly scans all bands and then roams from AP 1 to AP 3 somewhere between points В and С. WLAN is set to 5 GHz only, Open, default rate configuration. Which action improves the real-time application quality of experience in this area?

Select an option, then click Submit answer.

  • ○

    Enable 802.11v on the WLAN.
  • ○

    Enable 802.11r on the WLAN.
  • ○

    Enable 802.11k on the WLAN.
  • ○

    Move AP 2 to point B.